[PATCH v3 2/3] drm/msm/dpu: split dpu_encoder_wait_for_event into two functions
Abhinav Kumar
quic_abhinavk at quicinc.com
Sun Feb 25 19:49:18 UTC 2024
On 2/25/2024 6:12 AM, Dmitry Baryshkov wrote:
> Stop multiplexing several events via the dpu_encoder_wait_for_event()
> function. Split it into two distinct functions two allow separate
> handling of those events.
>
I understand the idea but would handling of those events be really distinct?
Like if wait_for_commit_done timedout or wait_for_tx_complete timedout,
the handling will be similar from my PoV.
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 74 +++++++++++++++++++++--------
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h | 22 ++-------
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 +-
> drivers/gpu/drm/msm/msm_drv.h | 10 ----
> 4 files changed, 59 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 194dbb08331d..30f349c8a1e5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -1282,7 +1282,7 @@ static void dpu_encoder_virt_atomic_disable(struct drm_encoder *drm_enc,
> trace_dpu_enc_disable(DRMID(drm_enc));
>
> /* wait for idle */
> - dpu_encoder_wait_for_event(drm_enc, MSM_ENC_TX_COMPLETE);
> + dpu_encoder_wait_for_tx_complete(drm_enc);
>
> dpu_encoder_resource_control(drm_enc, DPU_ENC_RC_EVENT_PRE_STOP);
>
> @@ -2402,10 +2402,23 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev,
> return &dpu_enc->base;
> }
>
> -int dpu_encoder_wait_for_event(struct drm_encoder *drm_enc,
> - enum msm_event_wait event)
> +/**
> + * dpu_encoder_wait_for_commit_done() - Wait for encoder to flush pending state
> + * @drm_enc: encoder pointer
> + *
> + * Wait for hardware to have flushed the current pending frames to hardware at
> + * a vblank or ctl_start Encoders will map this differently depending on the
> + * panel type.
> + *
Missing a '.' between ctl_start and Encoder?
> + * MSM_ENC_TX_COMPLETE - Wait for the hardware to transfer all the pixels to
> + * the panel. Encoders will map this differently
> + * depending on the panel type.
> + * vid mode -> vsync_irq
> + * cmd mode -> pp_done
> + * Return: 0 on success, -EWOULDBLOCK if already signaled, error otherwise
> + */
> +int dpu_encoder_wait_for_commit_done(struct drm_encoder *drm_enc)
> {
> - int (*fn_wait)(struct dpu_encoder_phys *phys_enc) = NULL;
> struct dpu_encoder_virt *dpu_enc = NULL;
> int i, ret = 0;
>
> @@ -2419,23 +2432,46 @@ int dpu_encoder_wait_for_event(struct drm_encoder *drm_enc,
> for (i = 0; i < dpu_enc->num_phys_encs; i++) {
> struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
>
> - switch (event) {
> - case MSM_ENC_COMMIT_DONE:
> - fn_wait = phys->ops.wait_for_commit_done;
> - break;
> - case MSM_ENC_TX_COMPLETE:
> - fn_wait = phys->ops.wait_for_tx_complete;
> - break;
> - default:
> - DPU_ERROR_ENC(dpu_enc, "unknown wait event %d\n",
> - event);
> - return -EINVAL;
> + if (phys->ops.wait_for_commit_done) {
> + DPU_ATRACE_BEGIN("wait_for_commit_done");
> + ret = phys->ops.wait_for_commit_done(phys);
> + DPU_ATRACE_END("wait_for_commit_done");
> + if (ret)
> + return ret;
> }
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * dpu_encoder_wait_for_tx_complete() - Wait for encoder to transfer pixels to panel
> + * @drm_enc: encoder pointer
> + *
> + * Wait for the hardware to transfer all the pixels to the panel. Encoders will
> + * map this differently depending on the panel type.
> + *
> + * Return: 0 on success, -EWOULDBLOCK if already signaled, error otherwise
> + */
> +int dpu_encoder_wait_for_tx_complete(struct drm_encoder *drm_enc)
> +{
> + struct dpu_encoder_virt *dpu_enc = NULL;
> + int i, ret = 0;
> +
> + if (!drm_enc) {
> + DPU_ERROR("invalid encoder\n");
> + return -EINVAL;
> + }
> + dpu_enc = to_dpu_encoder_virt(drm_enc);
> + DPU_DEBUG_ENC(dpu_enc, "\n");
> +
> + for (i = 0; i < dpu_enc->num_phys_encs; i++) {
> + struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
>
> - if (fn_wait) {
> - DPU_ATRACE_BEGIN("wait_for_completion_event");
> - ret = fn_wait(phys);
> - DPU_ATRACE_END("wait_for_completion_event");
> + if (phys->ops.wait_for_tx_complete) {
> + DPU_ATRACE_BEGIN("wait_for_tx_complete");
> + ret = phys->ops.wait_for_tx_complete(phys);
> + DPU_ATRACE_END("wait_for_tx_complete");
> if (ret)
> return ret;
> }
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> index fe6b1d312a74..0c928d1876e4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h
> @@ -93,25 +93,9 @@ void dpu_encoder_kickoff(struct drm_encoder *encoder);
> */
> int dpu_encoder_vsync_time(struct drm_encoder *drm_enc, ktime_t *wakeup_time);
>
> -/**
> - * dpu_encoder_wait_for_event - Waits for encoder events
> - * @encoder: encoder pointer
> - * @event: event to wait for
> - * MSM_ENC_COMMIT_DONE - Wait for hardware to have flushed the current pending
> - * frames to hardware at a vblank or ctl_start
> - * Encoders will map this differently depending on the
> - * panel type.
> - * vid mode -> vsync_irq
> - * cmd mode -> ctl_start
> - * MSM_ENC_TX_COMPLETE - Wait for the hardware to transfer all the pixels to
> - * the panel. Encoders will map this differently
> - * depending on the panel type.
> - * vid mode -> vsync_irq
> - * cmd mode -> pp_done
> - * Returns: 0 on success, -EWOULDBLOCK if already signaled, error otherwise
> - */
> -int dpu_encoder_wait_for_event(struct drm_encoder *drm_encoder,
> - enum msm_event_wait event);
> +int dpu_encoder_wait_for_commit_done(struct drm_encoder *drm_encoder);
> +
> +int dpu_encoder_wait_for_tx_complete(struct drm_encoder *drm_encoder);
>
> /*
> * dpu_encoder_get_intf_mode - get interface mode of the given encoder
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index d6412395bacc..26b5e54031d9 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -476,7 +476,7 @@ static void dpu_kms_wait_for_commit_done(struct msm_kms *kms,
> * mode panels. This may be a no-op for command mode panels.
> */
> trace_dpu_kms_wait_for_commit_done(DRMID(crtc));
> - ret = dpu_encoder_wait_for_event(encoder, MSM_ENC_COMMIT_DONE);
> + ret = dpu_encoder_wait_for_commit_done(encoder);
> if (ret && ret != -EWOULDBLOCK) {
> DPU_ERROR("wait for commit done returned %d\n", ret);
> break;
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index 762e13e2df74..91cf57f72321 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -74,16 +74,6 @@ enum msm_dsi_controller {
> #define MSM_GPU_MAX_RINGS 4
> #define MAX_H_TILES_PER_DISPLAY 2
>
> -/**
> - * enum msm_event_wait - type of HW events to wait for
> - * @MSM_ENC_COMMIT_DONE - wait for the driver to flush the registers to HW
> - * @MSM_ENC_TX_COMPLETE - wait for the HW to transfer the frame to panel
> - */
> -enum msm_event_wait {
> - MSM_ENC_COMMIT_DONE = 0,
> - MSM_ENC_TX_COMPLETE,
> -};
> -
> /**
> * struct msm_display_topology - defines a display topology pipeline
> * @num_lm: number of layer mixers used
>
More information about the dri-devel
mailing list