[PATCH 2/3] drm/panel: add samsung s6e3fa7 panel driver
Jessica Zhang
quic_jesszhan at quicinc.com
Wed Feb 28 22:04:53 UTC 2024
On 2/9/2024 3:17 PM, Richard Acayan wrote:
> On Thu, Feb 08, 2024 at 05:34:57PM -0800, Jessica Zhang wrote:
>> On 2/8/2024 4:16 PM, Richard Acayan wrote:
>>> The S6E3FA7 display controller is enabled in every Pixel 3a (non-XL)
>>> variant. Add the driver for it, generated by
>>> linux-mdss-dsi-panel-driver-generator.
>>>
>>> There are other panels connected to the same S6E3FA7 display controller,
>>> such as the AMS604NL01 panel, which are incompatible with this driver.
>>> Name the device tree compatible after the panel model according to
>>> iFixit.
>>>
>>> Link: https://github.com/msm8916-mainline/linux-mdss-dsi-panel-driver-generator
>>> Link: https://android.googlesource.com/kernel/msm/+/7fda1cd7b64710dafac5f34899611c6d35eb4cd2/arch/arm64/boot/dts/google/dsi-panel-s6e3fa7-1080p-cmd.dtsi
>>> Link: https://github.com/msm8953-mainline/linux/blob/v6.6.12-r0/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
>>> Link: https://www.ifixit.com/Guide/Image/meta/muyjtLQTHu6MDkhK
>>> Signed-off-by: Richard Acayan <mailingradian at gmail.com>
>>> ---
>>> drivers/gpu/drm/panel/Kconfig | 9 +
>>> drivers/gpu/drm/panel/Makefile | 1 +
>>> drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c | 285 ++++++++++++++++++
>>> 3 files changed, 295 insertions(+)
>>> create mode 100644 drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
>>>
>>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>>> index 8f3783742208..a693b03f680e 100644
>>> --- a/drivers/gpu/drm/panel/Kconfig
>>> +++ b/drivers/gpu/drm/panel/Kconfig
>>> @@ -577,6 +577,15 @@ config DRM_PANEL_SAMSUNG_DB7430
>>> DB7430 DPI display controller used in such devices as the
>>> LMS397KF04 480x800 DPI panel.
>>> +config DRM_PANEL_SAMSUNG_S6E3FA7
>>> + tristate "Samsung S6E3FA7 panel driver"
>>> + depends on OF
>>> + depends on DRM_MIPI_DSI
>>> + depends on BACKLIGHT_CLASS_DEVICE
>>> + help
>>> + Say Y here if you want to enable support for the Samsung S6E3FA7
>>> + 1920x2220 panel.
>>> +
>>> config DRM_PANEL_SAMSUNG_S6D16D0
>>> tristate "Samsung S6D16D0 DSI video mode panel"
>>> depends on OF
>>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>>> index d94a644d0a6c..560b62129f68 100644
>>> --- a/drivers/gpu/drm/panel/Makefile
>>> +++ b/drivers/gpu/drm/panel/Makefile
>>> @@ -59,6 +59,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
>>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
>>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D27A1) += panel-samsung-s6d27a1.o
>>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0) += panel-samsung-s6d7aa0.o
>>> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3FA7) += panel-samsung-s6e3fa7.o
>>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
>>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
>>> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o
>>> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c b/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
>>> new file mode 100644
>>> index 000000000000..10bc8fb5f1f9
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c
>>> @@ -0,0 +1,285 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Driver for the Samsung S6E3FA7 panel.
>>> + *
>>> + * Copyright (c) 2022-2024, The Linux Foundation. All rights reserved.
>>
>>
>> Hi Richard,
>>
>> Not really sure about the copyright dates -- since this is a completely new
>> file to this tree, wouldn't the year be just 2024?
>
> That would be more concise, but the original driver was generated and
> added to a kernel fork [1] in 2022 and amendments have been made since then.
Ah, got it. Sounds good.
In that case
Reviewed-by: Jessica Zhang <quic_jesszhan at quicinc.com>
Thanks,
Jessica Zhang
>
> [1] https://gitlab.com/sdm670-mainline/linux/-/blob/sdm670-v6.2.6/drivers/gpu/drm/panel/panel-samsung-s6e3fa7.c?ref_type=tags
>
>>
>> The rest LGTM.
>>
>> Thanks,
>>
>> Jessica Zhang
>>
>>> + * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
>>> + * Copyright (c) 2013, The Linux Foundation. All rights reserved.
>>> + */ > +
>>> +#include <linux/backlight.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/gpio/consumer.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +
>>> +#include <video/mipi_display.h>
>>> +
>>> +#include <drm/drm_mipi_dsi.h>
>>> +#include <drm/drm_modes.h>
>>> +#include <drm/drm_panel.h>
>>> +
>>> +struct s6e3fa7_panel {
>>> + struct drm_panel panel;
>>> + struct mipi_dsi_device *dsi;
>>> + struct gpio_desc *reset_gpio;
>>> +};
>>> +
>>> +static inline struct s6e3fa7_panel *to_s6e3fa7_panel(struct drm_panel *panel)
>>> +{
>>> + return container_of(panel, struct s6e3fa7_panel, panel);
>>> +}
>>> +
>>> +static void s6e3fa7_panel_reset(struct s6e3fa7_panel *ctx)
>>> +{
>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>> + usleep_range(1000, 2000);
>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>>> + usleep_range(10000, 11000);
>>> +}
>>> +
>>> +static int s6e3fa7_panel_on(struct s6e3fa7_panel *ctx)
>>> +{
>>> + struct mipi_dsi_device *dsi = ctx->dsi;
>>> + struct device *dev = &dsi->dev;
>>> + int ret;
>>> +
>>> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>>> + if (ret < 0) {
>>> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
>>> + return ret;
>>> + }
>>> + msleep(120);
>>> +
>>> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>>> + if (ret < 0) {
>>> + dev_err(dev, "Failed to set tear on: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>>> + mipi_dsi_dcs_write_seq(dsi, 0xf4,
>>> + 0xbb, 0x23, 0x19, 0x3a, 0x9f, 0x0f, 0x09, 0xc0,
>>> + 0x00, 0xb4, 0x37, 0x70, 0x79, 0x69);
>>> + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
>>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
>>> +
>>> + ret = mipi_dsi_dcs_set_display_on(dsi);
>>> + if (ret < 0) {
>>> + dev_err(dev, "Failed to set display on: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int s6e3fa7_panel_prepare(struct drm_panel *panel)
>>> +{
>>> + struct s6e3fa7_panel *ctx = to_s6e3fa7_panel(panel);
>>> + struct device *dev = &ctx->dsi->dev;
>>> + int ret;
>>> +
>>> + s6e3fa7_panel_reset(ctx);
>>> +
>>> + ret = s6e3fa7_panel_on(ctx);
>>> + if (ret < 0) {
>>> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int s6e3fa7_panel_unprepare(struct drm_panel *panel)
>>> +{
>>> + struct s6e3fa7_panel *ctx = to_s6e3fa7_panel(panel);
>>> +
>>> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int s6e3fa7_panel_disable(struct drm_panel *panel)
>>> +{
>>> + struct s6e3fa7_panel *ctx = to_s6e3fa7_panel(panel);
>>> + struct mipi_dsi_device *dsi = ctx->dsi;
>>> + struct device *dev = &dsi->dev;
>>> + int ret;
>>> +
>>> + ret = mipi_dsi_dcs_set_display_off(dsi);
>>> + if (ret < 0) {
>>> + dev_err(dev, "Failed to set display off: %d\n", ret);
>>> + return ret;
>>> + }
>>> +
>>> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
>>> + if (ret < 0) {
>>> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
>>> + return ret;
>>> + }
>>> + msleep(120);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct drm_display_mode s6e3fa7_panel_mode = {
>>> + .clock = (1080 + 32 + 32 + 78) * (2220 + 32 + 4 + 78) * 60 / 1000,
>>> + .hdisplay = 1080,
>>> + .hsync_start = 1080 + 32,
>>> + .hsync_end = 1080 + 32 + 32,
>>> + .htotal = 1080 + 32 + 32 + 78,
>>> + .vdisplay = 2220,
>>> + .vsync_start = 2220 + 32,
>>> + .vsync_end = 2220 + 32 + 4,
>>> + .vtotal = 2220 + 32 + 4 + 78,
>>> + .width_mm = 62,
>>> + .height_mm = 127,
>>> +};
>>> +
>>> +static int s6e3fa7_panel_get_modes(struct drm_panel *panel,
>>> + struct drm_connector *connector)
>>> +{
>>> + struct drm_display_mode *mode;
>>> +
>>> + mode = drm_mode_duplicate(connector->dev, &s6e3fa7_panel_mode);
>>> + if (!mode)
>>> + return -ENOMEM;
>>> +
>>> + drm_mode_set_name(mode);
>>> +
>>> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>>> + connector->display_info.width_mm = mode->width_mm;
>>> + connector->display_info.height_mm = mode->height_mm;
>>> + drm_mode_probed_add(connector, mode);
>>> +
>>> + return 1;
>>> +}
>>> +
>>> +static const struct drm_panel_funcs s6e3fa7_panel_funcs = {
>>> + .prepare = s6e3fa7_panel_prepare,
>>> + .unprepare = s6e3fa7_panel_unprepare,
>>> + .disable = s6e3fa7_panel_disable,
>>> + .get_modes = s6e3fa7_panel_get_modes,
>>> +};
>>> +
>>> +static int s6e3fa7_panel_bl_update_status(struct backlight_device *bl)
>>> +{
>>> + struct mipi_dsi_device *dsi = bl_get_data(bl);
>>> + u16 brightness = backlight_get_brightness(bl);
>>> + int ret;
>>> +
>>> + ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int s6e3fa7_panel_bl_get_brightness(struct backlight_device *bl)
>>> +{
>>> + struct mipi_dsi_device *dsi = bl_get_data(bl);
>>> + u16 brightness;
>>> + int ret;
>>> +
>>> + ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + return brightness;
>>> +}
>>> +
>>> +static const struct backlight_ops s6e3fa7_panel_bl_ops = {
>>> + .update_status = s6e3fa7_panel_bl_update_status,
>>> + .get_brightness = s6e3fa7_panel_bl_get_brightness,
>>> +};
>>> +
>>> +static struct backlight_device *
>>> +s6e3fa7_panel_create_backlight(struct mipi_dsi_device *dsi)
>>> +{
>>> + struct device *dev = &dsi->dev;
>>> + const struct backlight_properties props = {
>>> + .type = BACKLIGHT_RAW,
>>> + .brightness = 1023,
>>> + .max_brightness = 1023,
>>> + };
>>> +
>>> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
>>> + &s6e3fa7_panel_bl_ops, &props);
>>> +}
>>> +
>>> +static int s6e3fa7_panel_probe(struct mipi_dsi_device *dsi)
>>> +{
>>> + struct device *dev = &dsi->dev;
>>> + struct s6e3fa7_panel *ctx;
>>> + int ret;
>>> +
>>> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>>> + if (!ctx)
>>> + return -ENOMEM;
>>> +
>>> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
>>> + if (IS_ERR(ctx->reset_gpio))
>>> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
>>> + "Failed to get reset-gpios\n");
>>> +
>>> + ctx->dsi = dsi;
>>> + mipi_dsi_set_drvdata(dsi, ctx);
>>> +
>>> + dsi->lanes = 4;
>>> + dsi->format = MIPI_DSI_FMT_RGB888;
>>> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
>>> + MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_LPM;
>>> +
>>> + drm_panel_init(&ctx->panel, dev, &s6e3fa7_panel_funcs,
>>> + DRM_MODE_CONNECTOR_DSI);
>>> + ctx->panel.prepare_prev_first = true;
>>> +
>>> + ctx->panel.backlight = s6e3fa7_panel_create_backlight(dsi);
>>> + if (IS_ERR(ctx->panel.backlight))
>>> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
>>> + "Failed to create backlight\n");
>>> +
>>> + drm_panel_add(&ctx->panel);
>>> +
>>> + ret = mipi_dsi_attach(dsi);
>>> + if (ret < 0) {
>>> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
>>> + drm_panel_remove(&ctx->panel);
>>> + return ret;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void s6e3fa7_panel_remove(struct mipi_dsi_device *dsi)
>>> +{
>>> + struct s6e3fa7_panel *ctx = mipi_dsi_get_drvdata(dsi);
>>> + int ret;
>>> +
>>> + ret = mipi_dsi_detach(dsi);
>>> + if (ret < 0)
>>> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
>>> +
>>> + drm_panel_remove(&ctx->panel);
>>> +}
>>> +
>>> +static const struct of_device_id s6e3fa7_panel_of_match[] = {
>>> + { .compatible = "samsung,s6e3fa7-ams559nk06" },
>>> + { /* sentinel */ }
>>> +};
>>> +MODULE_DEVICE_TABLE(of, s6e3fa7_panel_of_match);
>>> +
>>> +static struct mipi_dsi_driver s6e3fa7_panel_driver = {
>>> + .probe = s6e3fa7_panel_probe,
>>> + .remove = s6e3fa7_panel_remove,
>>> + .driver = {
>>> + .name = "panel-samsung-s6e3fa7",
>>> + .of_match_table = s6e3fa7_panel_of_match,
>>> + },
>>> +};
>>> +module_mipi_dsi_driver(s6e3fa7_panel_driver);
>>> +
>>> +MODULE_AUTHOR("Richard Acayan <mailingradian at gmail.com>");
>>> +MODULE_DESCRIPTION("DRM driver for Samsung S6E3FA7 command mode DSI panel");
>>> +MODULE_LICENSE("GPL");
>>> --
>>> 2.43.0
>>>
>>>
>
More information about the dri-devel
mailing list