[PATCH v4 09/17] drm/mediatek: Support CSC in OVL
CK Hu (胡俊光)
ck.hu at mediatek.com
Tue Jan 2 07:14:01 UTC 2024
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240102/ddd48ddd/attachment-0001.htm>
-------------- next part --------------
Hi, Hsiao-chien:
On Tue, 2023-12-12 at 20:19 +0800, Hsiao Chien Sung wrote:
> Support Color Transform Control (CSC) in Overlay to
> do Y2R or R2R conversion.
>
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 121
> +++++++++++++++++++++++-
> 1 file changed, 118 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 66074c2d917c..7e217142d0c4 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -31,6 +31,7 @@
> #define OVL_LAYER_SMI_ID_EN BIT(0)
> #define OVL_BGCLR_SEL_IN BIT(2)
> #define OVL_LAYER_AFBC_EN(n) BIT(4+n)
> +#define OVL_OUTPUT_CLAMP BIT(26)
> #define DISP_REG_OVL_ROI_BGCLR 0x0028
> #define DISP_REG_OVL_SRC_CON 0x002c
> #define DISP_REG_OVL_CON(n) (0x0030 + 0x20 * (n))
> @@ -44,6 +45,23 @@
> #define DISP_REG_OVL_RDMA_GMC(n) (0x00c8 + 0x20 * (n))
> #define DISP_REG_OVL_ADDR_MT2701 0x0040
> #define DISP_REG_OVL_CLRFMT_EXT 0x02D0
> +#define DISP_REG_OVL_CLRFMT_EXT1 0x02D8
> +#define OVL_CLRFMT_EXT1_CSC_EN(n) (1 << (((n) *
> 4) + 1))
> +#define DISP_REG_OVL_Y2R_PARA_R0(n) (0x0134 + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_RMY (GENMAS
> K(14, 0))
> +#define DISP_REG_OVL_Y2R_PARA_G0(n) (0x013c + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_GMU (GENMAS
> K(30, 16))
> +#define DISP_REG_OVL_Y2R_PARA_B1(n) (0x0148 + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_BMV (GENMAS
> K(14, 0))
> +#define DISP_REG_OVL_Y2R_PARA_YUV_A_0(n) (0x014c + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_YA (GENMASK(10,
> 0))
> +#define OVL_Y2R_PARA_C_CF_UA (GENMASK(26,
> 16))
> +#define DISP_REG_OVL_Y2R_PARA_YUV_A_1(n) (0x0150 + 0x28 * (n))
> +#define OVL_Y2R_PARA_C_CF_VA (GENMASK(10,
> 0))
> +#define DISP_REG_OVL_Y2R_PRE_ADD2(n) (0x0154 + 0x28 * (n))
> +#define DISP_REG_OVL_R2R_R0(n) (0x0500 + 0x40
> * (n))
> +#define DISP_REG_OVL_R2R_G1(n) (0x0510 + 0x40
> * (n))
> +#define DISP_REG_OVL_R2R_B2(n) (0x0520 + 0x40
> * (n))
> #define DISP_REG_OVL_ADDR_MT8173 0x0f40
> #define DISP_REG_OVL_ADDR(ovl, n) ((ovl)->data->addr +
> 0x20 * (n))
> #define DISP_REG_OVL_HDR_ADDR(ovl, n) ((ovl)->data-
> >addr + 0x20 * (n) + 0x04)
> @@ -56,6 +74,8 @@
> #define OVL_CON_CLRFMT_MAN BIT(23)
> #define OVL_CON_BYTE_SWAP BIT(24)
> #define OVL_CON_RGB_SWAP BIT(25)
> +#define OVL_CON_MTX_AUTO_DIS BIT(26)
> +#define OVL_CON_MTX_EN BIT(27)
> #define OVL_CON_CLRFMT_RGB (1 << 12)
> #define OVL_CON_CLRFMT_RGBA8888 (2 << 12)
> #define OVL_CON_CLRFMT_ARGB8888 (3 << 12)
> @@ -63,6 +83,7 @@
> #define OVL_CON_CLRFMT_UYVY (4 << 12)
> #define OVL_CON_CLRFMT_YUYV (5 << 12)
> #define OVL_CON_MTX_YUV_TO_RGB (6 << 16)
> +#define OVL_CON_MTX_PROGRAMMABLE (8 << 16)
> #define OVL_CON_CLRFMT_RGB565(ovl) ((ovl)->data->fmt_rgb565_is_0 ?
> \
> 0 : OVL_CON_CLRFMT_RGB)
> #define OVL_CON_CLRFMT_RGB888(ovl) ((ovl)->data->fmt_rgb565_is_0 ?
> \
> @@ -76,6 +97,22 @@
> #define OVL_CON_VIRT_FLIP BIT(9)
> #define OVL_CON_HORZ_FLIP BIT(10)
>
> +static inline bool is_10bit_rgb(u32 fmt)
> +{
> + switch (fmt) {
> + case DRM_FORMAT_XRGB2101010:
> + case DRM_FORMAT_ARGB2101010:
> + case DRM_FORMAT_RGBX1010102:
> + case DRM_FORMAT_RGBA1010102:
> + case DRM_FORMAT_XBGR2101010:
> + case DRM_FORMAT_ABGR2101010:
> + case DRM_FORMAT_BGRX1010102:
> + case DRM_FORMAT_BGRA1010102:
> + return true;
> + }
> + return false;
> +}
> +
> static const u32 mt8173_formats[] = {
> DRM_FORMAT_XRGB8888,
> DRM_FORMAT_ARGB8888,
> @@ -217,6 +254,14 @@ void mtk_ovl_start(struct device *dev)
> if (ovl->data->smi_id_en)
> reg |= OVL_LAYER_SMI_ID_EN;
>
> + /*
> + * When doing Y2R conversion, it's common to get an output
> + * that is larger than 10 bits (negative numbers).
> + * Enable this bit to clamp the output to 10 bits per channel
> + * (should always be enabled)
> + */
> + reg |= OVL_OUTPUT_CLAMP;
> +
> writel_relaxed(reg, ovl->regs + DISP_REG_OVL_DATAPATH_CON);
> writel_relaxed(0x1, ovl->regs + DISP_REG_OVL_EN);
> }
> @@ -256,9 +301,7 @@ static void mtk_ovl_set_bit_depth(struct device
> *dev, int idx, u32 format,
> reg = readl(ovl->regs + DISP_REG_OVL_CLRFMT_EXT);
> reg &= ~OVL_CON_CLRFMT_BIT_DEPTH_MASK(idx);
>
> - if (format == DRM_FORMAT_RGBA1010102 ||
> - format == DRM_FORMAT_BGRA1010102 ||
> - format == DRM_FORMAT_ARGB2101010)
> + if (is_10bit_rgb(format))
> bit_depth = OVL_CON_CLRFMT_10_BIT;
>
> reg |= OVL_CON_CLRFMT_BIT_DEPTH(bit_depth, idx);
> @@ -458,6 +501,78 @@ void mtk_ovl_layer_config(struct device *dev,
> unsigned int idx,
> (state->base.fb && !state->base.fb->format->has_alpha))
> ignore_pixel_alpha = OVL_CONST_BLEND;
>
> + /* need to do Y2R and R2R to reduce 10bit data to 8bit for CRC
> calculation */
The comment is too simple to understand. I think now do not support 10
bits YUV format, so why Y2R? Describe the mixed result format first. Is
mixed result 8 bit RGB for mt8195? So the problem happen when 10 bit
yuv mixed into 8 bit RGB? I just guess what happen. So describe more
detail about this.
Regards,
CK
> + if (ovl->data->supports_clrfmt_ext) {
> + u32 y2r_coef = 0, y2r_offset = 0, r2r_coef = 0, csc_en
> = 0;
> +
> + if (is_10bit_rgb(fmt)) {
> + con |= OVL_CON_MTX_AUTO_DIS | OVL_CON_MTX_EN |
> OVL_CON_MTX_PROGRAMMABLE;
> +
> + /*
> + * Y2R coef setting
> + * bit 13 is 2^1, bit 12 is 2^0, bit 11 is 2^-
> 1,
> + * bit 10 is 2^-2 = 0.25
> + */
> + y2r_coef = BIT(10);
> +
> + /* -1 in 10bit */
> + y2r_offset = GENMASK(10, 0) - 1;
> +
> + /*
> + * R2R coef setting
> + * bit 19 is 2^1, bit 18 is 2^0, bit 17 is 2^-
> 1,
> + * bit 20 is 2^2 = 4
> + */
> + r2r_coef = BIT(20);
> +
> + /* CSC_EN is for R2R */
> + csc_en = OVL_CLRFMT_EXT1_CSC_EN(idx);
> +
> + /*
> + * 1. YUV input data - 1 and shift right for 2
> bits to remove it
> + * [R'] [0.25 0 0] [Y in - 1]
> + * [G'] = [ 0 0.25 0] * [U in - 1]
> + * [B'] [ 0 0 0.25] [V in - 1]
> + *
> + * 2. shift left for 2 bit letting the last 2
> bits become 0
> + * [R out] [ 4 0 0] [R']
> + * [G out] = [ 0 4 0] * [G']
> + * [B out] [ 0 0 4] [B']
> + */
> + }
> +
> + mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_Y2R_PARA_R0(idx),
> + OVL_Y2R_PARA_C_CF_RMY);
> + mtk_ddp_write_mask(cmdq_pkt, (y2r_coef << 16),
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_Y2R_PARA_G0(idx),
> + OVL_Y2R_PARA_C_CF_GMU);
> + mtk_ddp_write_mask(cmdq_pkt, y2r_coef,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_Y2R_PARA_B1(idx),
> + OVL_Y2R_PARA_C_CF_BMV);
> +
> + mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
> + OVL_Y2R_PARA_C_CF_YA);
> + mtk_ddp_write_mask(cmdq_pkt, (y2r_offset << 16),
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_Y2R_PARA_YUV_A_0(idx),
> + OVL_Y2R_PARA_C_CF_UA);
> + mtk_ddp_write_mask(cmdq_pkt, y2r_offset,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_Y2R_PARA_YUV_A_1(idx),
> + OVL_Y2R_PARA_C_CF_VA);
> +
> + mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_R2R_R0(idx));
> + mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_R2R_G1(idx));
> + mtk_ddp_write_relaxed(cmdq_pkt, r2r_coef,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_R2R_B2(idx));
> +
> + mtk_ddp_write_mask(cmdq_pkt, csc_en,
> + &ovl->cmdq_reg, ovl->regs,
> DISP_REG_OVL_CLRFMT_EXT1,
> + OVL_CLRFMT_EXT1_CSC_EN(idx));
> + }
> +
> if (pending->rotation & DRM_MODE_REFLECT_Y) {
> con |= OVL_CON_VIRT_FLIP;
> addr += (pending->height - 1) * pending->pitch;
More information about the dri-devel
mailing list