[PATCH v2 1/6] dt-bindings: display: add dt-bindings for STM32 LVDS device

Rob Herring robh at kernel.org
Thu Jan 11 14:51:44 UTC 2024


On Thu, Jan 11, 2024 at 11:40:44AM +0100, Raphael Gallais-Pou wrote:
> Add "st,stm32-lvds" compatible.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
> ---
> Changes in v2:
> 	- Switch compatible and clock-cells related areas
> 	- Remove faulty #include in the example.
> 	- Add entry in MAINTAINERS
> ---
>  .../bindings/display/st,stm32-lvds.yaml       | 117 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 118 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
> new file mode 100644
> index 000000000000..8dfc6e88f260
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/st,stm32-lvds.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 LVDS Display Interface Transmitter
> +
> +maintainers:
> +  - Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
> +  - Yannick Fertre <yannick.fertre at foss.st.com>
> +
> +description: |
> +  The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the
> +  LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC)
> +  onto the LVDS PHY.
> +
> +  It regroups three sub blocks:

regroups means rearranging. Perhaps 'contains' or 'is composed of' 
instead.

> +    - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input
> +      pixels onto the data lanes of the PHY
> +    - LVDS PHY: parallelize the data and drives the LVDS data lanes
> +    - LVDS wrapper: handles top-level settings
> +
> +  The LVDS controller driver supports the following high-level features:
> +    - FDP-Link-I and OpenLDI (v0.95) protocols
> +    - Single-Link or Dual-Link operation
> +    - Single-Display or Double-Display (with the same content duplicated on both)
> +    - Flexible Bit-Mapping, including JEIDA and VESA
> +    - RGB888 or RGB666 output
> +    - Synchronous design, with one input pixel per clock cycle
> +
> +properties:
> +  compatible:
> +    const: st,stm32-lvds

SoC specific compatible needed.

> +
> +  "#clock-cells":
> +    const: 0

What clock is provided?

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: APB peripheral clock
> +      - description: Reference clock for the internal PLL
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: ref
> +
> +  resets:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: |

Don't need '|' if no formatting to preserve.

> +          LVDS input port node, connected to the LTDC RGB output port.
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: |
> +          LVDS output port node, connected to a panel or bridge input port.
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - "#clock-cells"
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/stm32mp25-clks.h>
> +    #include <dt-bindings/reset/stm32mp25-resets.h>
> +
> +    lvds: lvds at 48060000 {
> +        compatible = "st,stm32-lvds";
> +        reg = <0x48060000 0x2000>;
> +        #clock-cells = <0>;
> +        clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
> +        clock-names = "pclk", "ref";
> +        resets = <&rcc LVDS_R>;
> +
> +        ports {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            port at 0 {
> +                reg = <0>;
> +                lvds_in: endpoint {
> +                   remote-endpoint = <&ltdc_ep1_out>;
> +                };
> +            };
> +
> +            port at 1 {
> +                reg = <1>;
> +                lvds_out0: endpoint {
> +                   remote-endpoint = <&lvds_panel_in>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9d959a6881f7..0b6ec5347195 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7193,6 +7193,7 @@ L:	dri-devel at lists.freedesktop.org
>  S:	Maintained
>  T:	git git://anongit.freedesktop.org/drm/drm-misc
>  F:	Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
> +F:	Documentation/devicetree/bindings/display/st,stm32-lvds.yaml
>  F:	drivers/gpu/drm/stm
>  
>  DRM DRIVERS FOR TI KEYSTONE
> -- 
> 2.25.1
> 


More information about the dri-devel mailing list