[PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
Kuogee Hsieh
quic_khsieh at quicinc.com
Wed Jan 17 18:29:01 UTC 2024
On 1/17/2024 10:12 AM, Dmitry Baryshkov wrote:
> On Wed, 17 Jan 2024 at 19:54, Kuogee Hsieh <quic_khsieh at quicinc.com> wrote:
>> MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. At
>> current implementation, at DP_TEST_DYNAMIC_RANGE_CEA case the
> In the current implementation, in the ... case
>
>> Colorimetry Indicator Field is mistakenly left shifted one extra
>> bit.
> This doesn't make sense. You say that the value is mistakenly shifted,
> but the shift is still in place in dp_catalog_ctrl_config_misc().
The problem is at
link->dp_link.test_video.test_dyn_range = (bp &
DP_TEST_DYNAMIC_RANGE_CEA); <== this from reading dpcd directly where
==> DP_TEST_DYNAMIC_RANGE_CEA is (1 << 3)
within dp_catalog_ctrl_config_misc(), cc will be left shift one more bit.
so that cc is totally is left shifted 4 bits (bit 4).
at misc0, it should be bit 3 set only for CEA_RGB.
>
>> This patch return correct value of colorimetry at
>> dp_link_get_colorimetry_config() to fix this problem.
> See Documentation/process/submitting-patches.rst#_describe_changes
>
>> Changes in V2:
>> -- drop retrieving colorimetry from colorspace
>> -- drop dr = link->dp_link.test_video.test_dyn_range assignment
>>
>> Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
>> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
>> ---
>> drivers/gpu/drm/msm/dp/dp_link.c | 11 ++++++-----
>> drivers/gpu/drm/msm/dp/dp_link.h | 3 +++
>> 2 files changed, 9 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
>> index 98427d4..2e1bdaf 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -1082,7 +1082,7 @@ int dp_link_process_request(struct dp_link *dp_link)
>>
>> int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>> {
>> - u32 cc;
>> + u32 cc = DP_MISC0_LEGACY_RGB;
>> struct dp_link_private *link;
>>
>> if (!dp_link) {
>> @@ -1096,10 +1096,11 @@ int dp_link_get_colorimetry_config(struct dp_link *dp_link)
>> * Unless a video pattern CTS test is ongoing, use RGB_VESA
>> * Only RGB_VESA and RGB_CEA supported for now
>> */
>> - if (dp_link_is_video_pattern_requested(link))
>> - cc = link->dp_link.test_video.test_dyn_range;
>> - else
>> - cc = DP_TEST_DYNAMIC_RANGE_VESA;
>> + if (dp_link_is_video_pattern_requested(link)) {
>> + if (link->dp_link.test_video.test_dyn_range &
>> + DP_TEST_DYNAMIC_RANGE_CEA)
>> + cc = DP_MISC0_CEA_RGB;
>> + }
>>
>> return cc;
>> }
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.h b/drivers/gpu/drm/msm/dp/dp_link.h
>> index 9dd4dd9..fe8f716 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.h
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.h
>> @@ -12,6 +12,9 @@
>> #define DP_TEST_BIT_DEPTH_UNKNOWN 0xFFFFFFFF
>> #define DP_LINK_CAP_ENHANCED_FRAMING (1 << 0)
>>
>> +#define DP_MISC0_LEGACY_RGB 0
>> +#define DP_MISC0_CEA_RGB 0x04
> These should go to dp_reg.h and should start with DP_MISC0_COLORIMETRY_CFG
>
>> +
>> struct dp_link_info {
>> unsigned char revision;
>> unsigned int rate;
>> --
>> 2.7.4
>>
>
More information about the dri-devel
mailing list