[PATCH AUTOSEL 6.1 08/53] drm/panel-edp: Add override_edid_mode quirk for generic edp

Sasha Levin sashal at kernel.org
Mon Jan 22 15:08:09 UTC 2024


From: Hsin-Yi Wang <hsinyi at chromium.org>

[ Upstream commit 9f7843b515811aea6c56527eb195b622e9c01f12 ]

Generic edp gets mode from edid. However, some panels report incorrect
mode in this way, resulting in glitches on panel. Introduce a new quirk
additional_mode to the generic edid to pick a correct hardcoded mode.

Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
Reviewed-by: Douglas Anderson <dianders at chromium.org>
Signed-off-by: Douglas Anderson <dianders at chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117215056.1883314-2-hsinyi@chromium.org
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/gpu/drm/panel/panel-edp.c | 48 +++++++++++++++++++++++++++++--
 1 file changed, 45 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index a163585a2a52..259b193e4dab 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -203,6 +203,9 @@ struct edp_panel_entry {
 
 	/** @name: Name of this panel (for printing to logs). */
 	const char *name;
+
+	/** @override_edid_mode: Override the mode obtained by edid. */
+	const struct drm_display_mode *override_edid_mode;
 };
 
 struct panel_edp {
@@ -301,6 +304,24 @@ static unsigned int panel_edp_get_display_modes(struct panel_edp *panel,
 	return num;
 }
 
+static int panel_edp_override_edid_mode(struct panel_edp *panel,
+					struct drm_connector *connector,
+					const struct drm_display_mode *override_mode)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, override_mode);
+	if (!mode) {
+		dev_err(panel->base.dev, "failed to add additional mode\n");
+		return 0;
+	}
+
+	mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(connector, mode);
+	return 1;
+}
+
 static int panel_edp_get_non_edid_modes(struct panel_edp *panel,
 					struct drm_connector *connector)
 {
@@ -568,6 +589,9 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 {
 	struct panel_edp *p = to_panel_edp(panel);
 	int num = 0;
+	bool has_override_edid_mode = p->detected_panel &&
+				      p->detected_panel != ERR_PTR(-EINVAL) &&
+				      p->detected_panel->override_edid_mode;
 
 	/* probe EDID if a DDC bus is available */
 	if (p->ddc) {
@@ -575,9 +599,18 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 
 		if (!p->edid)
 			p->edid = drm_get_edid(connector, p->ddc);
-
-		if (p->edid)
-			num += drm_add_edid_modes(connector, p->edid);
+		if (p->edid) {
+			if (has_override_edid_mode) {
+				/*
+				 * override_edid_mode is specified. Use
+				 * override_edid_mode instead of from edid.
+				 */
+				num += panel_edp_override_edid_mode(p, connector,
+						p->detected_panel->override_edid_mode);
+			} else {
+				num += drm_add_edid_modes(connector, p->edid);
+			}
+		}
 
 		pm_runtime_mark_last_busy(panel->dev);
 		pm_runtime_put_autosuspend(panel->dev);
@@ -1859,6 +1892,15 @@ static const struct panel_delay delay_200_500_e200 = {
 	.delay = _delay \
 }
 
+#define EDP_PANEL_ENTRY2(vend_chr_0, vend_chr_1, vend_chr_2, product_id, _delay, _name, _mode) \
+{ \
+	.name = _name, \
+	.panel_id = drm_edid_encode_panel_id(vend_chr_0, vend_chr_1, vend_chr_2, \
+					     product_id), \
+	.delay = _delay, \
+	.override_edid_mode = _mode \
+}
+
 /*
  * This table is used to figure out power sequencing delays for panels that
  * are detected by EDID. Entries here may point to entries in the
-- 
2.43.0



More information about the dri-devel mailing list