[PATCH 2/5] drm/mediatek: Support "None" blending in Mixer

CK Hu (胡俊光) ck.hu at mediatek.com
Mon Jul 1 02:22:16 UTC 2024


Hi, Shawn:

On Thu, 2024-06-20 at 01:27 +0800, Hsiao Chien Sung via B4 Relay wrote:
>  	 
> External email : Please do not click links or open attachments until you have verified the sender or the content.
>  From: Hsiao Chien Sung <shawn.sung at mediatek.com>
> 
> Support "None" alpha blending mode on MediaTek's chips.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_ethdr.c | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.c b/drivers/gpu/drm/mediatek/mtk_ethdr.c
> index 36021cb8df62..48b714994492 100644
> --- a/drivers/gpu/drm/mediatek/mtk_ethdr.c
> +++ b/drivers/gpu/drm/mediatek/mtk_ethdr.c
> @@ -3,6 +3,7 @@
>   * Copyright (c) 2021 MediaTek Inc.
>   */
>  
> +#include <drm/drm_blend.h>
>  #include <drm/drm_fourcc.h>
>  #include <drm/drm_framebuffer.h>
>  #include <linux/clk.h>
> @@ -35,6 +36,7 @@
>  #define MIX_SRC_L0_ENBIT(0)
>  #define MIX_L_SRC_CON(n)(0x28 + 0x18 * (n))
>  #define NON_PREMULTI_SOURCE(2 << 12)
> +#define PREMULTI_SOURCE(3 << 12)
>  #define MIX_L_SRC_SIZE(n)(0x30 + 0x18 * (n))
>  #define MIX_L_SRC_OFFSET(n)(0x34 + 0x18 * (n))
>  #define MIX_FUNC_DCM00x120
> @@ -175,7 +177,13 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,
>  alpha_con |= state->base.alpha & MIXER_ALPHA;
>  }
>  
> -if (state->base.fb && !state->base.fb->format->has_alpha) {
> +if (state->base.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE)
> +alpha_con |= PREMULTI_SOURCE;
> +else
> +alpha_con |= NON_PREMULTI_SOURCE;

Coverage mode is an already support mode, but this patch modify alpha_con for coverage mode.
So this is a bug fix?

Regards,
CK

> +
> +if ((state->base.fb && !state->base.fb->format->has_alpha) ||
> +    state->base.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE) {
>  /*
>   * Mixer doesn't support CONST_BLD mode,
>   * use a trick to make the output equivalent
> @@ -191,8 +199,7 @@ void mtk_ethdr_layer_config(struct device *dev, unsigned int idx,
>  mtk_ddp_write(cmdq_pkt, pending->height << 16 | align_width, &mixer->cmdq_base,
>        mixer->regs, MIX_L_SRC_SIZE(idx));
>  mtk_ddp_write(cmdq_pkt, offset, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_OFFSET(idx));
> -mtk_ddp_write_mask(cmdq_pkt, alpha_con, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_CON(idx),
> -   0x1ff);
> +mtk_ddp_write(cmdq_pkt, alpha_con, &mixer->cmdq_base, mixer->regs, MIX_L_SRC_CON(idx));
>  mtk_ddp_write_mask(cmdq_pkt, BIT(idx), &mixer->cmdq_base, mixer->regs, MIX_SRC_CON,
>     BIT(idx));
>  }
> 
> -- 
> Git-146)
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240701/1afafbc8/attachment-0001.htm>


More information about the dri-devel mailing list