[PATCH] backlight: l4f00242t03: Add check for spi_setup

[Daniel Thompson]

On Fri, Jul 05, 2024 at 04:38:34PM +0800, Chen Ni wrote:
> Add check for the return value of spi_setup() and return the error
> if it fails in order to catch the error.
>
> Signed-off-by: Chen Ni <nichen at iscas.ac.cn>
> ---
>  drivers/video/backlight/l4f00242t03.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
> index dd0874f8c7ff..a4e27adee8ac 100644
> --- a/drivers/video/backlight/l4f00242t03.c
> +++ b/drivers/video/backlight/l4f00242t03.c
> @@ -166,6 +166,7 @@ static const struct lcd_ops l4f_ops = {
>  static int l4f00242t03_probe(struct spi_device *spi)
>  {
>  	struct l4f00242t03_priv *priv;
> +	int ret;
>
>  	priv = devm_kzalloc(&spi->dev, sizeof(struct l4f00242t03_priv),
>  				GFP_KERNEL);
> @@ -174,7 +175,9 @@ static int l4f00242t03_probe(struct spi_device *spi)
>
>  	spi_set_drvdata(spi, priv);
>  	spi->bits_per_word = 9;
> -	spi_setup(spi);
> +	ret = spi_setup(spi);
> +	if (ret < 0)
> +		return ret;

Good change but please add a dev_err_probe() here to match the other
error paths in this function.


Daniel.