[PATCH 01/10] dt-bindings: display: imx: Add some i.MX8qxp Display Controller processing units
Liu Ying
victor.liu at nxp.com
Fri Jul 5 09:09:23 UTC 2024
Freescale i.MX8qxp Display Controller is implemented as construction set of
building blocks with unified concept and standardized interfaces.
Document some processing units to support two display outputs.
ConstFrame, ExtDst, FetchLayer, FetchWarp and LayerBlend processing units
are in pixel engine. FrameGen and TCon processing units are in display
engine.
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
.../imx/fsl,imx8qxp-dc-constframe.yaml | 51 +++++++
.../display/imx/fsl,imx8qxp-dc-extdst.yaml | 79 +++++++++++
.../imx/fsl,imx8qxp-dc-fetchlayer.yaml | 37 ++++++
.../imx/fsl,imx8qxp-dc-fetchunit-common.yaml | 125 ++++++++++++++++++
.../display/imx/fsl,imx8qxp-dc-fetchwarp.yaml | 37 ++++++
.../display/imx/fsl,imx8qxp-dc-framegen.yaml | 71 ++++++++++
.../imx/fsl,imx8qxp-dc-layerblend.yaml | 46 +++++++
.../display/imx/fsl,imx8qxp-dc-tcon.yaml | 41 ++++++
8 files changed, 487 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchlayer.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit-common.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchwarp.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml
new file mode 100644
index 000000000000..80f826289309
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-constframe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Constant Frame
+
+description: |
+ The Constant Frame unit is used instead of a Fetch unit where generation of
+ constant color frames only is sufficient. This is the case for the background
+ planes of content and safety streams in a Display Controller.
+
+ The color can be setup to any RGBA value.
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-constframe
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ fsl,dc-cf-id:
+ description: Constant Frame unit instance number
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 4, 5]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - fsl,dc-cf-id
+
+additionalProperties: false
+
+examples:
+ - |
+ constframe at 56180960 {
+ compatible = "fsl,imx8qxp-dc-constframe";
+ reg = <0x56180960 0x3>, <0x56184400 0x400>;
+ reg-names = "pec", "cfg";
+ fsl,dc-cf-id = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml
new file mode 100644
index 000000000000..45957db3aadf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-extdst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller External Destination Interface
+
+description: |
+ The External Destination unit is the interface between the internal pixel
+ processing pipeline of the Pixel Engine, which is 30-bit RGB plus 8-bit Alpha,
+ and a Display Engine.
+
+ It comprises the following built-in Gamma apply function.
+
+ +------X-----------------------+
+ | | ExtDst Unit |
+ | V |
+ | +-------+ |
+ | | Gamma | |
+ | +-------+ |
+ | | |
+ | V +
+ +------X-----------------------+
+
+ The output format is 24-bit RGB plus 1-bit Alpha. Conversion from 10 to 8
+ bits is done by LSBit truncation. Alpha output bit is 1 for input 255, 0
+ otherwise.
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-extdst
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: shdload
+ - const: framecomplete
+ - const: seqcomplete
+
+ fsl,dc-ed-id:
+ description: External Destination unit instance number
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 4, 5]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+ - fsl,dc-ed-id
+
+additionalProperties: false
+
+examples:
+ - |
+ extdst at 56180980 {
+ compatible = "fsl,imx8qxp-dc-extdst";
+ reg = <0x56180980 0x7>, <0x56184800 0x400>;
+ reg-names = "pec", "cfg";
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <3>, <4>, <5>;
+ interrupt-names = "shdload", "framecomplete", "seqcomplete";
+ fsl,dc-ed-id = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchlayer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchlayer.yaml
new file mode 100644
index 000000000000..d459573828ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchlayer.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-fetchlayer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Fetchlayer
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+allOf:
+ - $ref: fsl,imx8qxp-dc-fetchunit-common.yaml#
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetchlayer
+
+ fsl,dc-fl-id:
+ description: Fetchlayer unit instance number
+ $ref: /schemas/types.yaml#/definitions/uint32
+ const: 0
+
+required:
+ - compatible
+ - fsl,dc-fl-id
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fetchlayer at 56180ac0 {
+ compatible = "fsl,imx8qxp-dc-fetchlayer";
+ reg = <0x56180ac0 0x3>, <0x56188400 0x800>;
+ reg-names = "pec", "cfg";
+ fsl,dc-fl-id = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit-common.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit-common.yaml
new file mode 100644
index 000000000000..a7a568672dc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit-common.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-fetchunit-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Fetch Unit
+
+description: |
+ The Fetch Unit is the interface between the AXI bus for source buffer access
+ and the internal pixel processing pipeline, which is 30-bit RGB plus 8-bit
+ Alpha.
+
+ It is used to generate foreground planes in Display Controllers and source
+ planes in Blit Engines, and comprises the following built-in functions to
+ convert a wide range of frame buffer types.
+
+ +---------X-----------------------------------------+
+ | | Fetch Unit |
+ | V |
+ | +---------+ |
+ | | | |
+ | | Decode | Decompression [Decode] |
+ | | | |
+ | +---------+ |
+ | | |
+ | V |
+ | +---------+ |
+ | | Clip & | Clip Window [All] |
+ | | Overlay | Plane composition [Layer, Warp] |
+ | | | |
+ | +---------+ |
+ | | |
+ | V |
+ | +---------+ |
+ | | Re- | Flip/Rotate/Repl./Drop [All] |
+ X--> | sample | Perspective/Affine warping [Persp] |
+ | | | | Arbitrary warping [Warp, Persp] |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | |
+ | | | Palette | Color Palette [Layer, Decode] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | Extract | Raw to RGBA/YUV [All] |
+ | | | & | Bit width expansion [All] |
+ | | | Expand | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | Planar to packed |
+ | |->| Combine | [Decode, Warp, Persp] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | YUV422 to YUV444 |
+ | | | Chroma | [Decode, Persp] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | YUV to RGB |
+ | | | Color | [Warp, Persp, Decode, Layer] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | Gamma removal |
+ | | | Gamma | [Warp, Persp, Decode, Layer] |
+ | | | | |
+ | | +---------+ |
+ | | | |
+ | | V |
+ | | +---------+ |
+ | | | | Alpla multiply, RGB pre-multiply |
+ | ->| Multiply| [Warp, Persp, Decode, Layer] |
+ | | | |
+ | --------- |
+ | | |
+ | V |
+ | +---------+ |
+ | | | Bilinear filter |
+ | | Filter | [Warp, Persp] |
+ | | | |
+ | +---------+ |
+ | | |
+ | V |
+ +---------X-----------------------------------------+
+
+ Note that different derivatives of the Fetch Unit exist. Each implements a
+ specific subset only of the pipeline stages shown above. Restrictions for the
+ units are specified in [square brackets].
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+properties:
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ fsl,prg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Optional Prefetch Resolve Gasket associated with the Fetch Unit.
+
+required:
+ - reg
+ - reg-names
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchwarp.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchwarp.yaml
new file mode 100644
index 000000000000..5613f84e6112
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchwarp.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-fetchwarp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Fetchwarp
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+allOf:
+ - $ref: fsl,imx8qxp-dc-fetchunit-common.yaml#
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-fetchwarp
+
+ fsl,dc-fw-id:
+ description: Fetchwarp unit instance number
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 9]
+
+required:
+ - compatible
+ - fsl,dc-fw-id
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ fetchwarp at 56180a60 {
+ compatible = "fsl,imx8qxp-dc-fetchwarp";
+ reg = <0x56180a60 0x4>, <0x56186400 0x400>;
+ reg-names = "pec", "cfg";
+ fsl,dc-fw-id = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml
new file mode 100644
index 000000000000..3fe666f35a1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-framegen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Frame Generator
+
+description:
+ The Frame Generator (FrameGen) module generates a programmable video timing
+ and optionally allows to synchronize the generated video timing to external
+ synchronization signals.
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-framegen
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: int0
+ - const: int1
+ - const: int2
+ - const: int3
+ - const: primsync_on
+ - const: primsync_off
+ - const: secsync_on
+ - const: secsync_off
+
+ fsl,dc-fg-id:
+ description: Frame Generator unit instance number
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+ - interrupt-names
+ - fsl,dc-fg-id
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+
+ framegen at 5618b800 {
+ compatible = "fsl,imx8qxp-dc-framegen";
+ reg = <0x5618b800 0x400>;
+ clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>;
+ interrupt-parent = <&dc0_intc>;
+ interrupts = <18>, <19>, <20>, <21>, <41>, <42>, <43>, <44>;
+ interrupt-names = "int0", "int1", "int2", "int3",
+ "primsync_on", "primsync_off",
+ "secsync_on", "secsync_off";
+ fsl,dc-fg-id = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml
new file mode 100644
index 000000000000..7da26d5859d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-layerblend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Layer Blend Unit
+
+description: Combines two input frames to a single output frame.
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-layerblend
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: pec
+ - const: cfg
+
+ fsl,dc-lb-id:
+ description: Layer Blend unit instance number
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - fsl,dc-lb-id
+
+additionalProperties: false
+
+examples:
+ - |
+ layerblend at 56180ba0 {
+ compatible = "fsl,imx8qxp-dc-layerblend";
+ reg = <0x56180ba0 0x4>, <0x5618a400 0x400>;
+ reg-names = "pec", "cfg";
+ fsl,dc-lb-id = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml
new file mode 100644
index 000000000000..32a57de1038d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Timing Controller
+
+description:
+ The TCon can generate a wide range of customized synchronization signals and
+ does the mapping of the color bits to the output.
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-tcon
+
+ reg:
+ maxItems: 1
+
+ fsl,dc-tc-id:
+ description: Timing Controller unit instance number
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+required:
+ - compatible
+ - reg
+ - fsl,dc-tc-id
+
+additionalProperties: false
+
+examples:
+ - |
+ tcon at 5618c800 {
+ compatible = "fsl,imx8qxp-dc-tcon";
+ reg = <0x5618c800 0x800>;
+ fsl,dc-tc-id = <0>;
+ };
--
2.34.1
More information about the dri-devel
mailing list