[PATCH] dt-bindings: display: bridge: ti, sn65dsi83: add burst-mode-disabled

[Stefano Radaelli]

Yes this is not the mainline driver but it is the one from which the
mainline driver is taken.

Yes this problem occurs with this mainline driver.

Stefano

Il Mar 9 Lug 2024, 23:12 Marek Vasut <marex at denx.de> ha scritto:

> On 7/9/24 7:30 PM, Stefano Radaelli wrote:
> > Okay, I get it.
> >
> > So if you think this mode shouldn't be implemented within this driver, we
> > can close the thread.
> > Just for information, this driver has been implemented from the work done
> > by Compulab (as it says in the driver's initial comments), and they do
> not
> > put the burst mode by default, not even giving the possibility to
> activate
> > it by dts:
> >
> https://github.com/compulab-yokneam/imx8-android/blob/master/o8/vendor/nxp-opensource/kernel_imx/0055-sn65dsi83-Add-ti-sn65dsi83-dsi-to-lvds-bridge-driver.patch
>
> This is not the mainline Linux driver.
>
> > The panels that I've had these problems with are some of JuTouch's
> > 1920x1200, for example JT101TM015 , and I solved it by giving the option
> to
> > remove this mode.
> > I have also heard from other colleagues who have had the same problem on
> > some dual-channel displays.
>
> Does that problem happen with the aforementioned driver or the mainline
> Linux driver ?
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240709/1b08f7e4/attachment.htm>