[PATCH 2/5] drm/panel: samsung-atna33xc20: Add compatible for ATNA45AF01

[Doug Anderson]

Hi,

On Wed, Jul 10, 2024 at 10:05 AM Stephan Gerhold
<stephan.gerhold at linaro.org> wrote:
>
> The Samsung ATNA45AF01 panel needs exactly the same non-standard power
> sequence as the Samsung ATNA33XC20 panel for backlight to work properly.
> Add the new "samsung,atna45af01" compatible to the driver to make it handle
> these panels as well.
>
> While ATNA45AF01 would also work with "samsung,atna33xc20" as a fallback
> compatible, the original submission of the compatible in commit
> 4bfe6c8f7c23 ("drm/panel-simple: Add Samsung ATNA33XC20") had the timings
> and resolution hardcoded. These would not work for ATNA45AF01.
>
> Signed-off-by: Stephan Gerhold <stephan.gerhold at linaro.org>
> ---
>  drivers/gpu/drm/panel/panel-samsung-atna33xc20.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
> index 9a482a744b8c..fd56fd02df87 100644
> --- a/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
> +++ b/drivers/gpu/drm/panel/panel-samsung-atna33xc20.c
> @@ -333,6 +333,7 @@ static void atana33xc20_remove(struct dp_aux_ep_device *aux_ep)
>
>  static const struct of_device_id atana33xc20_dt_match[] = {
>         { .compatible = "samsung,atna33xc20", },
> +       { .compatible = "samsung,atna45af01", },

As per my response to patch #1, you don't need this change at all if
you just add a fallback compatible. Later if there is anything special
we need to do for this panel we can match against it, but right now
there is no need.


-Doug