[PATCH] drm/stm: ltdc: add mask for lxcr register

[Yannick Fertre]

The purpose of this mask is to simplify writing to the lxcr
register and not to forget any fields.

Signed-off-by: Yannick Fertre <yannick.fertre at foss.st.com>
---
 drivers/gpu/drm/stm/ltdc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index cb4f08673a64..3876346a1303 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -187,6 +187,7 @@
 #define LXCR_COLKEN	BIT(1)		/* Color Keying Enable */
 #define LXCR_CLUTEN	BIT(4)		/* Color Look-Up Table ENable */
 #define LXCR_HMEN	BIT(8)		/* Horizontal Mirroring ENable */
+#define LXCR_MASK (LXCR_LEN | LXCR_COLKEN | LXCR_CLUTEN | LXCR_HMEN)
 
 #define LXWHPCR_WHSTPOS	GENMASK(11, 0)	/* Window Horizontal StarT POSition */
 #define LXWHPCR_WHSPPOS	GENMASK(27, 16)	/* Window Horizontal StoP POSition */
@@ -806,8 +807,7 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
 
 	/* Disable all layers */
 	for (layer_index = 0; layer_index < ldev->caps.nb_layers; layer_index++)
-		regmap_write_bits(ldev->regmap, LTDC_L1CR + layer_index * LAY_OFS,
-				  LXCR_CLUTEN | LXCR_LEN, 0);
+		regmap_write_bits(ldev->regmap, LTDC_L1CR + layer_index * LAY_OFS, LXCR_MASK, 0);
 
 	/* disable IRQ */
 	regmap_clear_bits(ldev->regmap, LTDC_IER, IER_FUWIE | IER_FUEIE | IER_RRIE | IER_TERRIE);
@@ -1474,7 +1474,7 @@ static void ltdc_plane_atomic_update(struct drm_plane *plane,
 	if (newstate->rotation & DRM_MODE_REFLECT_X)
 		val |= LXCR_HMEN;
 
-	regmap_write_bits(ldev->regmap, LTDC_L1CR + lofs, LXCR_LEN | LXCR_CLUTEN | LXCR_HMEN, val);
+	regmap_write_bits(ldev->regmap, LTDC_L1CR + lofs, LXCR_MASK, val);
 
 	/* Commit shadow registers = update plane at next vblank */
 	if (ldev->caps.plane_reg_shadow)
@@ -1512,7 +1512,7 @@ static void ltdc_plane_atomic_disable(struct drm_plane *plane,
 	u32 lofs = plane->index * LAY_OFS;
 
 	/* Disable layer */
-	regmap_write_bits(ldev->regmap, LTDC_L1CR + lofs, LXCR_LEN | LXCR_CLUTEN |  LXCR_HMEN, 0);
+	regmap_write_bits(ldev->regmap, LTDC_L1CR + lofs, LXCR_MASK, 0);
 
 	/* Reset the layer transparency to hide any related background color */
 	regmap_write_bits(ldev->regmap, LTDC_L1CACR + lofs, LXCACR_CONSTA, 0x00);
-- 
2.34.1