[PATCH v5 03/16] drm/msm/dpu: move CRTC resource assignment to dpu_encoder_virt_atomic_mode_set
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue Jul 16 23:06:14 UTC 2024
On Wed, 17 Jul 2024 at 01:40, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
>
>
> On 6/24/2024 2:13 PM, Dmitry Baryshkov wrote:
> > Historically CRTC resources (LMs and CTLs) were assigned in
> > dpu_crtc_atomic_begin(). The commit 9222cdd27e82 ("drm/msm/dpu: move hw
> > resource tracking to crtc state") simply moved resources to
> > struct dpu_crtc_state, without changing the code sequence. Later on the
> > commit b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder
> > modeset") rearanged the code, but still kept the cstate->num_mixers
> > assignment to happen during commit phase. This makes dpu_crtc_state
> > inconsistent between consequent atomic_check() calls.
> >
> > Move CRTC resource assignment to happen at the end of
> > dpu_encoder_virt_atomic_check().
> >
> > Fixes: b107603b4ad0 ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset")
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > ---
> > drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 3 --
> > drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 60 +++++++++++++++++++----------
> > 2 files changed, 39 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > index 9f2164782844..7399794d75eb 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> > @@ -1094,9 +1094,6 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
> > drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> > dpu_encoder_register_frame_event_callback(encoder, NULL, NULL);
> >
> > - memset(cstate->mixers, 0, sizeof(cstate->mixers));
> > - cstate->num_mixers = 0;
> > -
>
> Any reason this part was removed?
>
> I think we still need this part.
>
> In dpu_encoder_get_topology(), we do not assign topology.num_lm based on
> state parameters, its based on catalog and intf_count which are decided
> at init time itself.
>
> Which means cstate->num_mixers will remain at a non-zero value even if
> we have NO_MODE which is what happens when we are disabling the CRTC
> during suspend or hotplug.
In the disable path the driver calls dpu_rm_release(), releasing all
resources. So there will be no assigned mixers, which matches num_lm =
0 in dpu_encoder_assign_crtc_resources().
>
> > /* disable clk & bw control until clk & bw properties are set */
> > cstate->bw_control = false;
> > cstate->bw_split_vote = false;
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > index 7613005fbfea..98f3a8d84300 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> > @@ -628,6 +628,41 @@ static struct msm_display_topology dpu_encoder_get_topology(
> > return topology;
> > }
> >
> > +static void dpu_encoder_assign_crtc_resources(struct dpu_kms *dpu_kms,
> > + struct drm_encoder *drm_enc,
> > + struct dpu_global_state *global_state,
> > + struct drm_crtc_state *crtc_state)
> > +{
> > + struct dpu_crtc_state *cstate;
> > + struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
> > + struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
> > + struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC];
> > + int num_lm, num_ctl, num_dspp, i;
> > +
> > + cstate = to_dpu_crtc_state(crtc_state);
> > +
> > + memset(cstate->mixers, 0, sizeof(cstate->mixers));
> > +
> > + num_ctl = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
> > + drm_enc->base.id, DPU_HW_BLK_CTL, hw_ctl, ARRAY_SIZE(hw_ctl));
> > + num_lm = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
> > + drm_enc->base.id, DPU_HW_BLK_LM, hw_lm, ARRAY_SIZE(hw_lm));
> > + num_dspp = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
> > + drm_enc->base.id, DPU_HW_BLK_DSPP, hw_dspp,
> > + ARRAY_SIZE(hw_dspp));
> > +
> > + for (i = 0; i < num_lm; i++) {
> > + int ctl_idx = (i < num_ctl) ? i : (num_ctl-1);
> > +
> > + cstate->mixers[i].hw_lm = to_dpu_hw_mixer(hw_lm[i]);
> > + cstate->mixers[i].lm_ctl = to_dpu_hw_ctl(hw_ctl[ctl_idx]);
> > + if (i < num_dspp)
>
> Will there be a case where num_lm != num_dspp?
No, _dpu_rm_check_lm_and_get_connected_blks() makes sure that num_lm = num_dspp.
I will drop this condition and add a comment.
>
> > + cstate->mixers[i].hw_dspp = to_dpu_hw_dspp(hw_dspp[i]);
> > + }
> > +
> > + cstate->num_mixers = num_lm;
> > +}
> > +
> > static int dpu_encoder_virt_atomic_check(
> > struct drm_encoder *drm_enc,
> > struct drm_crtc_state *crtc_state,
> > @@ -698,6 +733,9 @@ static int dpu_encoder_virt_atomic_check(
> > drm_enc, crtc_state, topology);
> > }
> >
> > + if (!ret)
> > + dpu_encoder_assign_crtc_resources(dpu_kms, drm_enc, global_state, crtc_state);
> > +
> > trace_dpu_enc_atomic_check_flags(DRMID(drm_enc), adj_mode->flags);
> >
> > return ret;
> > @@ -1097,14 +1135,11 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
> > struct dpu_encoder_virt *dpu_enc;
> > struct msm_drm_private *priv;
> > struct dpu_kms *dpu_kms;
> > - struct dpu_crtc_state *cstate;
> > struct dpu_global_state *global_state;
> > struct dpu_hw_blk *hw_pp[MAX_CHANNELS_PER_ENC];
> > struct dpu_hw_blk *hw_ctl[MAX_CHANNELS_PER_ENC];
> > - struct dpu_hw_blk *hw_lm[MAX_CHANNELS_PER_ENC];
> > - struct dpu_hw_blk *hw_dspp[MAX_CHANNELS_PER_ENC] = { NULL };
> > struct dpu_hw_blk *hw_dsc[MAX_CHANNELS_PER_ENC];
> > - int num_lm, num_ctl, num_pp, num_dsc;
> > + int num_ctl, num_pp, num_dsc;
> > unsigned int dsc_mask = 0;
> > int i;
> >
> > @@ -1133,11 +1168,6 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
> > ARRAY_SIZE(hw_pp));
> > num_ctl = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
> > drm_enc->base.id, DPU_HW_BLK_CTL, hw_ctl, ARRAY_SIZE(hw_ctl));
> > - num_lm = dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
> > - drm_enc->base.id, DPU_HW_BLK_LM, hw_lm, ARRAY_SIZE(hw_lm));
> > - dpu_rm_get_assigned_resources(&dpu_kms->rm, global_state,
> > - drm_enc->base.id, DPU_HW_BLK_DSPP, hw_dspp,
> > - ARRAY_SIZE(hw_dspp));
> >
> > for (i = 0; i < MAX_CHANNELS_PER_ENC; i++)
> > dpu_enc->hw_pp[i] = i < num_pp ? to_dpu_hw_pingpong(hw_pp[i])
> > @@ -1163,18 +1193,6 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
> > dpu_enc->cur_master->hw_cdm = hw_cdm ? to_dpu_hw_cdm(hw_cdm) : NULL;
> > }
> >
> > - cstate = to_dpu_crtc_state(crtc_state);
> > -
> > - for (i = 0; i < num_lm; i++) {
> > - int ctl_idx = (i < num_ctl) ? i : (num_ctl-1);
> > -
> > - cstate->mixers[i].hw_lm = to_dpu_hw_mixer(hw_lm[i]);
> > - cstate->mixers[i].lm_ctl = to_dpu_hw_ctl(hw_ctl[ctl_idx]);
> > - cstate->mixers[i].hw_dspp = to_dpu_hw_dspp(hw_dspp[i]);
> > - }
> > -
> > - cstate->num_mixers = num_lm;
> > -
> > dpu_enc->connector = conn_state->connector;
> >
> > for (i = 0; i < dpu_enc->num_phys_encs; i++) {
> >
--
With best wishes
Dmitry
More information about the dri-devel
mailing list