[PATCH v5 08/16] drm/msm/dpu: drop msm_format from struct dpu_hw_fmt_layout

Abhinav Kumar quic_abhinavk at quicinc.com
Wed Jul 17 20:15:23 UTC 2024



On 6/24/2024 2:13 PM, Dmitry Baryshkov wrote:
> The struct dpu_hw_fmt_layout defines hardware data layout (addresses,
> sizes and pitches. Drop format field from this structure as it's not a
Missing closing brace ")" here?

> part of the data layout.
> 

Its a bit subjective IMO whether you consider format as part of hardware 
data layout or not. Registers do have format bitfields too so I am 
somewhat unsure if this change is really needed.

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>   .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c    | 31 +++++++---------------
>   drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c        | 23 ++++++++--------
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        |  2 --
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c          |  4 +--
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h          |  3 ++-
>   5 files changed, 25 insertions(+), 38 deletions(-)
> 

<Snip>

> @@ -318,15 +318,10 @@ static void dpu_encoder_phys_wb_setup(
>   {
>   	struct dpu_hw_wb *hw_wb = phys_enc->hw_wb;
>   	struct drm_display_mode mode = phys_enc->cached_mode;
> -	struct drm_framebuffer *fb = NULL;
>   	struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
> -	struct drm_writeback_job *wb_job;
>   	const struct msm_format *format;
> -	const struct msm_format *dpu_fmt;
>   
> -	wb_job = wb_enc->wb_job;
>   	format = msm_framebuffer_format(wb_enc->wb_job->fb);
> -	dpu_fmt = mdp_get_format(&phys_enc->dpu_kms->base, format->pixel_format, wb_job->fb->modifier);
>  

This is interesting. I wonder why I just didnt use format directly that 
time itself :)

Maybe I was thinking that mdp_get_format() will also match the modifiers 
and return the corresponding msm_format.

>   	DPU_DEBUG("[mode_set:%d, \"%s\",%d,%d]\n",
>   			hw_wb->idx - WB_0, mode.name,
> @@ -338,9 +333,9 @@ static void dpu_encoder_phys_wb_setup(
>   
>   	dpu_encoder_phys_wb_set_qos(phys_enc);
>   
> -	dpu_encoder_phys_wb_setup_fb(phys_enc, fb);
> +	dpu_encoder_phys_wb_setup_fb(phys_enc, format);
>   
> -	dpu_encoder_helper_phys_setup_cdm(phys_enc, dpu_fmt, CDM_CDWN_OUTPUT_WB);
> +	dpu_encoder_helper_phys_setup_cdm(phys_enc, format, CDM_CDWN_OUTPUT_WB);
>   
>   	dpu_encoder_phys_wb_setup_ctl(phys_enc);
>   }
> @@ -584,14 +579,6 @@ static void dpu_encoder_phys_wb_prepare_wb_job(struct dpu_encoder_phys *phys_enc
>   
>   	format = msm_framebuffer_format(job->fb);
>   
> -	wb_cfg->dest.format = mdp_get_format(&phys_enc->dpu_kms->base,
> -					     format->pixel_format, job->fb->modifier);
> -	if (!wb_cfg->dest.format) {
> -		/* this error should be detected during atomic_check */
> -		DPU_ERROR("failed to get format %p4cc\n", &format->pixel_format);
> -		return;
> -	}
> -
>   	ret = dpu_format_populate_layout(aspace, job->fb, &wb_cfg->dest);
>   	if (ret) {
>   		DPU_DEBUG("failed to populate layout %d\n", ret);


More information about the dri-devel mailing list