[PATCH v3 3/4] dt-bindings: display: ti,am65x-dss: Add OLDI properties for AM625 DSS

[Krzysztof Kozlowski]

On 16/07/2024 10:42, Aradhya Bhatia wrote:
> The DSS in AM625 SoC has 2 OLDI TXes. Refer the OLDI schema to add the
> support for the OLDI TXes.
> 
> The AM625 DSS VP1 (port at 0) can connect and control 2 OLDI TXes, to use
> them in dual-link or cloned single-link OLDI modes. Add support for an
> additional endpoint under the port at 0 to accurately depict the data flow
> path.
> 
> Signed-off-by: Aradhya Bhatia <a-bhatia1 at ti.com>
> ---
>  .../bindings/display/ti/ti,am65x-dss.yaml     | 135 ++++++++++++++++++
>  1 file changed, 135 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> index 399d68986326..249597455d34 100644
> --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> @@ -91,6 +91,24 @@ properties:
>            For AM625 DSS, the internal DPI output port node from video
>            port 1.
>            For AM62A7 DSS, the port is tied off inside the SoC.
> +        properties:
> +          endpoint at 0:
> +            $ref: /schemas/graph.yaml#/properties/endpoint
> +            description:
> +              For AM625 DSS, VP Connection to OLDI0.
> +              For AM65X DSS, OLDI output from the SoC.
> +
> +          endpoint at 1:
> +            $ref: /schemas/graph.yaml#/properties/endpoint
> +            description:
> +              For AM625 DSS, VP Connection to OLDI1.

Eh, that's confusing. Why do you have graph to your children? Isn't this
entirely pointless?

> +
> +        anyOf:
> +          - required:
> +              - endpoint
> +          - required:
> +              - endpoint at 0
> +              - endpoint at 1
>  
>        port at 1:
>          $ref: /schemas/graph.yaml#/properties/port
> @@ -112,6 +130,23 @@ properties:
>        Input memory (from main memory to dispc) bandwidth limit in
>        bytes per second
>  
> +  oldi-txes:
> +    type: object
> +    additionalProperties: true

Why? This looks wrong.

> +    properties:
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +    patternProperties:
> +      '^oldi_tx@[0-1]$':

Please follow DTS coding style for naming.

> +        type: object
> +        $ref: ti,am625-oldi.yaml#
> +        unevaluatedProperties: false
> +        description: OLDI transmitters connected to the DSS VPs
> +
>  allOf:
>    - if:
>        properties:
> @@ -123,6 +158,19 @@ allOf:
>          ports:
>            properties:
>              port at 0: false
> +            oldi_txes: false
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: ti,am65x-dss
> +    then:
> +      properties:
> +        oldi_txes: false
> +        port at 0:
> +          properties:
> +            endpoint at 1: false
>  
>  required:
>    - compatible
> @@ -171,3 +219,90 @@ examples:
>              };
>          };
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        dss1: dss at 30200000 {
> +            compatible = "ti,am625-dss";
> +            reg = <0x00 0x30200000 0x00 0x1000>, /* common */
> +                  <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
> +                  <0x00 0x30206000 0x00 0x1000>, /* vid */
> +                  <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
> +                  <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
> +                  <0x00 0x3020a000 0x00 0x1000>, /* vp1 */
> +                  <0x00 0x3020b000 0x00 0x1000>, /* vp2 */
> +                  <0x00 0x30201000 0x00 0x1000>; /* common1 */
> +            reg-names = "common", "vidl1", "vid",
> +                        "ovr1", "ovr2", "vp1", "vp2", "common1";
> +            power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
> +            clocks =        <&k3_clks 186 6>,
> +                            <&vp1_clock>,
> +                            <&k3_clks 186 2>;
> +            clock-names = "fck", "vp1", "vp2";
> +            interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> +            oldi-txes {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                oldi0: oldi at 0 {

You are duplicating the example from previous schema. No need. Keep
only, one complete example.

Best regards,
Krzysztof