[PATCH 2/2] drm/mipi-dsi: Change multi functions to use quiet member of mipi_dsi_multi_context

Jani Nikula jani.nikula at linux.intel.com
Wed Jul 24 15:32:14 UTC 2024


On Wed, 24 Jul 2024, Tejas Vipin <tejasvipin76 at gmail.com> wrote:
> Changes all the multi functions to check if the current context requires
> errors to be printed or not using the quiet member.
>
> Signed-off-by: Tejas Vipin <tejasvipin76 at gmail.com>
> ---
>  drivers/gpu/drm/drm_mipi_dsi.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
> index a471c46f5ca6..cbb77342d201 100644
> --- a/drivers/gpu/drm/drm_mipi_dsi.c
> +++ b/drivers/gpu/drm/drm_mipi_dsi.c
> @@ -814,6 +814,8 @@ void mipi_dsi_generic_write_multi(struct mipi_dsi_multi_context *ctx,
>  	ret = mipi_dsi_generic_write(dsi, payload, size);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending generic data %*ph failed: %d\n",
>  			(int)size, payload, ctx->accum_err);

A maintainability nitpick. Imagine someone wishing to add some more
error handling here. Or something else after the block.

IMO the dev_err() should be wrapped in if (!ctx->quiet) instead of
adding an early return.

Ditto everywhere.

BR,
Jani.


>  	}
> @@ -958,6 +960,8 @@ void mipi_dsi_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx,
>  	ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending dcs data %*ph failed: %d\n",
>  			(int)len, data, ctx->accum_err);
>  	}
> @@ -1450,6 +1454,8 @@ void mipi_dsi_picture_parameter_set_multi(struct mipi_dsi_multi_context *ctx,
>  	ret = mipi_dsi_picture_parameter_set(dsi, pps);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending PPS failed: %d\n",
>  			ctx->accum_err);
>  	}
> @@ -1481,6 +1487,8 @@ void mipi_dsi_compression_mode_ext_multi(struct mipi_dsi_multi_context *ctx,
>  	ret = mipi_dsi_compression_mode_ext(dsi, enable, algo, pps_selector);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending COMPRESSION_MODE failed: %d\n",
>  			ctx->accum_err);
>  	}
> @@ -1506,6 +1514,8 @@ void mipi_dsi_dcs_nop_multi(struct mipi_dsi_multi_context *ctx)
>  	ret = mipi_dsi_dcs_nop(dsi);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending DCS NOP failed: %d\n",
>  			ctx->accum_err);
>  	}
> @@ -1531,6 +1541,8 @@ void mipi_dsi_dcs_enter_sleep_mode_multi(struct mipi_dsi_multi_context *ctx)
>  	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending DCS ENTER_SLEEP_MODE failed: %d\n",
>  			ctx->accum_err);
>  	}
> @@ -1556,6 +1568,8 @@ void mipi_dsi_dcs_exit_sleep_mode_multi(struct mipi_dsi_multi_context *ctx)
>  	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending DCS EXIT_SLEEP_MODE failed: %d\n",
>  			ctx->accum_err);
>  	}
> @@ -1581,6 +1595,8 @@ void mipi_dsi_dcs_set_display_off_multi(struct mipi_dsi_multi_context *ctx)
>  	ret = mipi_dsi_dcs_set_display_off(dsi);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending DCS SET_DISPLAY_OFF failed: %d\n",
>  			ctx->accum_err);
>  	}
> @@ -1606,6 +1622,8 @@ void mipi_dsi_dcs_set_display_on_multi(struct mipi_dsi_multi_context *ctx)
>  	ret = mipi_dsi_dcs_set_display_on(dsi);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending DCS SET_DISPLAY_ON failed: %d\n",
>  			ctx->accum_err);
>  	}
> @@ -1633,6 +1651,8 @@ void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx,
>  	ret = mipi_dsi_dcs_set_tear_on(dsi, mode);
>  	if (ret < 0) {
>  		ctx->accum_err = ret;
> +		if (ctx->quiet)
> +			return;
>  		dev_err(dev, "sending DCS SET_TEAR_ON failed: %d\n",
>  			ctx->accum_err);
>  	}

-- 
Jani Nikula, Intel


More information about the dri-devel mailing list