[PATCH v4 2/6] drm/gma500: Make I2C terminology more inclusive
Thomas Zimmermann
tzimmermann at suse.de
Mon Jul 29 07:41:26 UTC 2024
I merged this patch into drm-misc-next.
Am 11.07.24 um 07:27 schrieb Easwar Hariharan:
> I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave"
> with more appropriate terms. Inspired by Wolfram's series to fix drivers/i2c/,
> fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that
> the approved verbiage exists in the specification.
>
> Acked-by: Thomas Zimmermann <tzimmermann at suse.de>
> Signed-off-by: Easwar Hariharan <eahariha at linux.microsoft.com>
> ---
> drivers/gpu/drm/gma500/cdv_intel_lvds.c | 2 +-
> drivers/gpu/drm/gma500/intel_bios.c | 22 ++++++++++-----------
> drivers/gpu/drm/gma500/intel_bios.h | 4 ++--
> drivers/gpu/drm/gma500/intel_gmbus.c | 2 +-
> drivers/gpu/drm/gma500/psb_drv.h | 2 +-
> drivers/gpu/drm/gma500/psb_intel_drv.h | 2 +-
> drivers/gpu/drm/gma500/psb_intel_lvds.c | 4 ++--
> drivers/gpu/drm/gma500/psb_intel_sdvo.c | 26 ++++++++++++-------------
> 8 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
> index f08a6803dc184..c7652a02b42ec 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
> @@ -565,7 +565,7 @@ void cdv_intel_lvds_init(struct drm_device *dev,
> dev->dev, "I2C bus registration failed.\n");
> goto err_encoder_cleanup;
> }
> - gma_encoder->i2c_bus->slave_addr = 0x2C;
> + gma_encoder->i2c_bus->target_addr = 0x2C;
> dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus;
>
> /*
> diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c
> index 8245b5603d2c0..d5924ca3ed050 100644
> --- a/drivers/gpu/drm/gma500/intel_bios.c
> +++ b/drivers/gpu/drm/gma500/intel_bios.c
> @@ -14,8 +14,8 @@
> #include "psb_intel_drv.h"
> #include "psb_intel_reg.h"
>
> -#define SLAVE_ADDR1 0x70
> -#define SLAVE_ADDR2 0x72
> +#define TARGET_ADDR1 0x70
> +#define TARGET_ADDR2 0x72
>
> static void *find_section(struct bdb_header *bdb, int section_id)
> {
> @@ -357,10 +357,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv,
> /* skip the device block if device type is invalid */
> continue;
> }
> - if (p_child->slave_addr != SLAVE_ADDR1 &&
> - p_child->slave_addr != SLAVE_ADDR2) {
> + if (p_child->target_addr != TARGET_ADDR1 &&
> + p_child->target_addr != TARGET_ADDR2) {
> /*
> - * If the slave address is neither 0x70 nor 0x72,
> + * If the target address is neither 0x70 nor 0x72,
> * it is not a SDVO device. Skip it.
> */
> continue;
> @@ -371,22 +371,22 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv,
> DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
> continue;
> }
> - DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
> + DRM_DEBUG_KMS("the SDVO device with target addr %2x is found on"
> " %s port\n",
> - p_child->slave_addr,
> + p_child->target_addr,
> (p_child->dvo_port == DEVICE_PORT_DVOB) ?
> "SDVOB" : "SDVOC");
> p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]);
> if (!p_mapping->initialized) {
> p_mapping->dvo_port = p_child->dvo_port;
> - p_mapping->slave_addr = p_child->slave_addr;
> + p_mapping->target_addr = p_child->target_addr;
> p_mapping->dvo_wiring = p_child->dvo_wiring;
> p_mapping->ddc_pin = p_child->ddc_pin;
> p_mapping->i2c_pin = p_child->i2c_pin;
> p_mapping->initialized = 1;
> DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
> p_mapping->dvo_port,
> - p_mapping->slave_addr,
> + p_mapping->target_addr,
> p_mapping->dvo_wiring,
> p_mapping->ddc_pin,
> p_mapping->i2c_pin);
> @@ -394,10 +394,10 @@ parse_sdvo_device_mapping(struct drm_psb_private *dev_priv,
> DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
> "two SDVO device.\n");
> }
> - if (p_child->slave2_addr) {
> + if (p_child->target2_addr) {
> /* Maybe this is a SDVO device with multiple inputs */
> /* And the mapping info is not added */
> - DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this"
> + DRM_DEBUG_KMS("there exists the target2_addr. Maybe this"
> " is a SDVO device with multiple inputs.\n");
> }
> count++;
> diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h
> index 0e6facf21e332..b5adea2a20c38 100644
> --- a/drivers/gpu/drm/gma500/intel_bios.h
> +++ b/drivers/gpu/drm/gma500/intel_bios.h
> @@ -186,13 +186,13 @@ struct child_device_config {
> u16 addin_offset;
> u8 dvo_port; /* See Device_PORT_* above */
> u8 i2c_pin;
> - u8 slave_addr;
> + u8 target_addr;
> u8 ddc_pin;
> u16 edid_ptr;
> u8 dvo_cfg; /* See DEVICE_CFG_* above */
> u8 dvo2_port;
> u8 i2c2_pin;
> - u8 slave2_addr;
> + u8 target2_addr;
> u8 ddc2_pin;
> u8 capabilities;
> u8 dvo_wiring;/* See DEVICE_WIRE_* above */
> diff --git a/drivers/gpu/drm/gma500/intel_gmbus.c b/drivers/gpu/drm/gma500/intel_gmbus.c
> index aa45509859f21..ee8b047587f25 100644
> --- a/drivers/gpu/drm/gma500/intel_gmbus.c
> +++ b/drivers/gpu/drm/gma500/intel_gmbus.c
> @@ -333,7 +333,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
> clear_err:
> /* Toggle the Software Clear Interrupt bit. This has the effect
> * of resetting the GMBUS controller and so clearing the
> - * BUS_ERROR raised by the slave's NAK.
> + * BUS_ERROR raised by the target's NAK.
> */
> GMBUS_REG_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);
> GMBUS_REG_WRITE(GMBUS1 + reg_offset, 0);
> diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
> index 83c17689c454f..bddf89b82fecc 100644
> --- a/drivers/gpu/drm/gma500/psb_drv.h
> +++ b/drivers/gpu/drm/gma500/psb_drv.h
> @@ -202,7 +202,7 @@ struct psb_intel_opregion {
> struct sdvo_device_mapping {
> u8 initialized;
> u8 dvo_port;
> - u8 slave_addr;
> + u8 target_addr;
> u8 dvo_wiring;
> u8 i2c_pin;
> u8 i2c_speed;
> diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
> index c111e933e1ed2..2499fd6a80c9d 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_drv.h
> +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
> @@ -80,7 +80,7 @@ struct psb_intel_mode_device {
> struct gma_i2c_chan {
> struct i2c_adapter base;
> struct i2c_algo_bit_data algo;
> - u8 slave_addr;
> + u8 target_addr;
>
> /* for getting at dev. private (mmio etc.) */
> struct drm_device *drm_dev;
> diff --git a/drivers/gpu/drm/gma500/psb_intel_lvds.c b/drivers/gpu/drm/gma500/psb_intel_lvds.c
> index 8486de230ec91..d1cd9a9403959 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_lvds.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_lvds.c
> @@ -97,7 +97,7 @@ static int psb_lvds_i2c_set_brightness(struct drm_device *dev,
>
> struct i2c_msg msgs[] = {
> {
> - .addr = lvds_i2c_bus->slave_addr,
> + .addr = lvds_i2c_bus->target_addr,
> .flags = 0,
> .len = 2,
> .buf = out_buf,
> @@ -707,7 +707,7 @@ void psb_intel_lvds_init(struct drm_device *dev,
> dev->dev, "I2C bus registration failed.\n");
> goto err_encoder_cleanup;
> }
> - lvds_priv->i2c_bus->slave_addr = 0x2C;
> + lvds_priv->i2c_bus->target_addr = 0x2C;
> dev_priv->lvds_i2c_bus = lvds_priv->i2c_bus;
>
> /*
> diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> index e4f914decebae..8dafff963ca8b 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> @@ -70,7 +70,7 @@ struct psb_intel_sdvo {
> struct gma_encoder base;
>
> struct i2c_adapter *i2c;
> - u8 slave_addr;
> + u8 target_addr;
>
> struct i2c_adapter ddc;
>
> @@ -259,13 +259,13 @@ static bool psb_intel_sdvo_read_byte(struct psb_intel_sdvo *psb_intel_sdvo, u8 a
> {
> struct i2c_msg msgs[] = {
> {
> - .addr = psb_intel_sdvo->slave_addr,
> + .addr = psb_intel_sdvo->target_addr,
> .flags = 0,
> .len = 1,
> .buf = &addr,
> },
> {
> - .addr = psb_intel_sdvo->slave_addr,
> + .addr = psb_intel_sdvo->target_addr,
> .flags = I2C_M_RD,
> .len = 1,
> .buf = ch,
> @@ -463,14 +463,14 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c
> psb_intel_sdvo_debug_write(psb_intel_sdvo, cmd, args, args_len);
>
> for (i = 0; i < args_len; i++) {
> - msgs[i].addr = psb_intel_sdvo->slave_addr;
> + msgs[i].addr = psb_intel_sdvo->target_addr;
> msgs[i].flags = 0;
> msgs[i].len = 2;
> msgs[i].buf = buf + 2 *i;
> buf[2*i + 0] = SDVO_I2C_ARG_0 - i;
> buf[2*i + 1] = ((u8*)args)[i];
> }
> - msgs[i].addr = psb_intel_sdvo->slave_addr;
> + msgs[i].addr = psb_intel_sdvo->target_addr;
> msgs[i].flags = 0;
> msgs[i].len = 2;
> msgs[i].buf = buf + 2*i;
> @@ -479,12 +479,12 @@ static bool psb_intel_sdvo_write_cmd(struct psb_intel_sdvo *psb_intel_sdvo, u8 c
>
> /* the following two are to read the response */
> status = SDVO_I2C_CMD_STATUS;
> - msgs[i+1].addr = psb_intel_sdvo->slave_addr;
> + msgs[i+1].addr = psb_intel_sdvo->target_addr;
> msgs[i+1].flags = 0;
> msgs[i+1].len = 1;
> msgs[i+1].buf = &status;
>
> - msgs[i+2].addr = psb_intel_sdvo->slave_addr;
> + msgs[i+2].addr = psb_intel_sdvo->target_addr;
> msgs[i+2].flags = I2C_M_RD;
> msgs[i+2].len = 1;
> msgs[i+2].buf = &status;
> @@ -1899,7 +1899,7 @@ psb_intel_sdvo_is_hdmi_connector(struct psb_intel_sdvo *psb_intel_sdvo, int devi
> }
>
> static u8
> -psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
> +psb_intel_sdvo_get_target_addr(struct drm_device *dev, int sdvo_reg)
> {
> struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
> struct sdvo_device_mapping *my_mapping, *other_mapping;
> @@ -1913,14 +1913,14 @@ psb_intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
> }
>
> /* If the BIOS described our SDVO device, take advantage of it. */
> - if (my_mapping->slave_addr)
> - return my_mapping->slave_addr;
> + if (my_mapping->target_addr)
> + return my_mapping->target_addr;
>
> /* If the BIOS only described a different SDVO device, use the
> * address that it isn't using.
> */
> - if (other_mapping->slave_addr) {
> - if (other_mapping->slave_addr == 0x70)
> + if (other_mapping->target_addr) {
> + if (other_mapping->target_addr == 0x70)
> return 0x72;
> else
> return 0x70;
> @@ -2446,7 +2446,7 @@ bool psb_intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
> return false;
>
> psb_intel_sdvo->sdvo_reg = sdvo_reg;
> - psb_intel_sdvo->slave_addr = psb_intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1;
> + psb_intel_sdvo->target_addr = psb_intel_sdvo_get_target_addr(dev, sdvo_reg) >> 1;
> psb_intel_sdvo_select_i2c_bus(dev_priv, psb_intel_sdvo, sdvo_reg);
> if (!psb_intel_sdvo_init_ddc_proxy(psb_intel_sdvo, dev)) {
> kfree(psb_intel_sdvo);
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
More information about the dri-devel
mailing list