[PATCH] drm/ast: add multiple connectors support

Thomas Zimmermann tzimmermann at suse.de
Tue Jul 30 06:42:09 UTC 2024


Hi

Am 30.07.24 um 03:25 schrieb oushixiong:
> Yes, I have  tested these patches, and these patches fix the problem.

Thanks a lot. Patch 2 is the one that fixes the issue. I'll add your 
Tested-by tag to it.

Best regards
Thomas

>
> Best regards
> Shixiong
>
> 在 2024/7/29 20:34, Thomas Zimmermann 写道:
>> Hi
>>
>> Am 11.07.24 um 11:01 schrieb oushixiong1025 at 163.com:
>>> From: Shixiong Ou <oushixiong at kylinos.cn>
>>>
>>> [WHY]
>>> The AST2600 tx_chip_types will be detected as AST_TX_DP, but some BMC
>>> boards that use AST2600 use the VGA interface instead of the DP 
>>> interface.
>>> In this case, it will use Virtual connector as the DP is disconnected.
>>>
>>> [HOW]
>>> Allows multiple physical connectors to exist at the same time.
>>
>> And another question: does the patch series at
>>
>>   https://patchwork.freedesktop.org/series/136198/
>>
>> fix the problem?
>>
>> Best regards
>> Thomas
>>
>>>
>>> Signed-off-by: Shixiong Ou <oushixiong at kylinos.cn>
>>> ---
>>>   drivers/gpu/drm/ast/ast_drv.h  |  6 ++++-
>>>   drivers/gpu/drm/ast/ast_main.c |  8 +++----
>>>   drivers/gpu/drm/ast/ast_mode.c | 40 
>>> ++++++++++++++++++++--------------
>>>   3 files changed, 33 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/ast/ast_drv.h 
>>> b/drivers/gpu/drm/ast/ast_drv.h
>>> index ba3d86973995..e326124b3fec 100644
>>> --- a/drivers/gpu/drm/ast/ast_drv.h
>>> +++ b/drivers/gpu/drm/ast/ast_drv.h
>>> @@ -150,9 +150,13 @@ static inline struct ast_plane 
>>> *to_ast_plane(struct drm_plane *plane)
>>>    * BMC
>>>    */
>>>   +#define MAX_CONNECTORS 2
>>> +
>>>   struct ast_bmc_connector {
>>>       struct drm_connector base;
>>> -    struct drm_connector *physical_connector;
>>> +
>>> +    struct drm_connector *physical_connectors[MAX_CONNECTORS];
>>> +    int count;
>>>   };
>>>     static inline struct ast_bmc_connector *
>>> diff --git a/drivers/gpu/drm/ast/ast_main.c 
>>> b/drivers/gpu/drm/ast/ast_main.c
>>> index 0637abb70361..428529749ae6 100644
>>> --- a/drivers/gpu/drm/ast/ast_main.c
>>> +++ b/drivers/gpu/drm/ast/ast_main.c
>>> @@ -85,7 +85,7 @@ static void ast_detect_tx_chip(struct ast_device 
>>> *ast, bool need_post)
>>>       if (!need_post) {
>>>           jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xa3, 
>>> 0xff);
>>>           if (jreg & 0x80)
>>> -            ast->tx_chip_types = AST_TX_SIL164_BIT;
>>> +            ast->tx_chip_types |= AST_TX_SIL164_BIT;
>>>       }
>>>         if (IS_AST_GEN4(ast) || IS_AST_GEN5(ast) || IS_AST_GEN6(ast)) {
>>> @@ -97,7 +97,7 @@ static void ast_detect_tx_chip(struct ast_device 
>>> *ast, bool need_post)
>>>           jreg = ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xd1, 
>>> 0xff);
>>>           switch (jreg) {
>>>           case 0x04:
>>> -            ast->tx_chip_types = AST_TX_SIL164_BIT;
>>> +            ast->tx_chip_types |= AST_TX_SIL164_BIT;
>>>               break;
>>>           case 0x08:
>>>               ast->dp501_fw_addr = drmm_kzalloc(dev, 32*1024, 
>>> GFP_KERNEL);
>>> @@ -110,12 +110,12 @@ static void ast_detect_tx_chip(struct 
>>> ast_device *ast, bool need_post)
>>>               }
>>>               fallthrough;
>>>           case 0x0c:
>>> -            ast->tx_chip_types = AST_TX_DP501_BIT;
>>> +            ast->tx_chip_types |= AST_TX_DP501_BIT;
>>>           }
>>>       } else if (IS_AST_GEN7(ast)) {
>>>           if (ast_get_index_reg_mask(ast, AST_IO_VGACRI, 0xD1, 
>>> TX_TYPE_MASK) ==
>>>               ASTDP_DPMCU_TX) {
>>> -            ast->tx_chip_types = AST_TX_ASTDP_BIT;
>>> +            ast->tx_chip_types |= AST_TX_ASTDP_BIT;
>>>               ast_dp_launch(&ast->base);
>>>           }
>>>       }
>>> diff --git a/drivers/gpu/drm/ast/ast_mode.c 
>>> b/drivers/gpu/drm/ast/ast_mode.c
>>> index 6695af70768f..31a49d32e506 100644
>>> --- a/drivers/gpu/drm/ast/ast_mode.c
>>> +++ b/drivers/gpu/drm/ast/ast_mode.c
>>> @@ -1717,7 +1717,8 @@ static int 
>>> ast_bmc_connector_helper_detect_ctx(struct drm_connector *connector,
>>>                              bool force)
>>>   {
>>>       struct ast_bmc_connector *bmc_connector = 
>>> to_ast_bmc_connector(connector);
>>> -    struct drm_connector *physical_connector = 
>>> bmc_connector->physical_connector;
>>> +    struct drm_connector *physical_connector;
>>> +    int i, count = bmc_connector->count;
>>>         /*
>>>        * Most user-space compositors cannot handle more than one 
>>> connected
>>> @@ -1730,10 +1731,13 @@ static int 
>>> ast_bmc_connector_helper_detect_ctx(struct drm_connector *connector,
>>>        *        than one connector per CRTC. The BMC should always 
>>> be connected.
>>>        */
>>>   -    if (physical_connector && physical_connector->status == 
>>> connector_status_disconnected)
>>> -        return connector_status_connected;
>>> +    for (i = 0; i < count; i++) {
>>> +        physical_connector = bmc_connector->physical_connectors[i];
>>> +        if (physical_connector && physical_connector->status == 
>>> connector_status_connected)
>>> +            return connector_status_disconnected;
>>> +    }
>>>   -    return connector_status_disconnected;
>>> +    return connector_status_connected;
>>>   }
>>>     static int ast_bmc_connector_helper_get_modes(struct 
>>> drm_connector *connector)
>>> @@ -1756,10 +1760,11 @@ static const struct drm_connector_funcs 
>>> ast_bmc_connector_funcs = {
>>>     static int ast_bmc_connector_init(struct drm_device *dev,
>>>                     struct ast_bmc_connector *bmc_connector,
>>> -                  struct drm_connector *physical_connector)
>>> +                  struct drm_connector **physical_connector,
>>> +                  int count)
>>>   {
>>>       struct drm_connector *connector = &bmc_connector->base;
>>> -    int ret;
>>> +    int i, ret;
>>>         ret = drm_connector_init(dev, connector, 
>>> &ast_bmc_connector_funcs,
>>>                    DRM_MODE_CONNECTOR_VIRTUAL);
>>> @@ -1768,13 +1773,16 @@ static int ast_bmc_connector_init(struct 
>>> drm_device *dev,
>>>         drm_connector_helper_add(connector, 
>>> &ast_bmc_connector_helper_funcs);
>>>   -    bmc_connector->physical_connector = physical_connector;
>>> +    for (i = 0; i < count; i++)
>>> +        bmc_connector->physical_connectors[i] = physical_connector[i];
>>> +    bmc_connector->count = count;
>>>         return 0;
>>>   }
>>>     static int ast_bmc_output_init(struct ast_device *ast,
>>> -                   struct drm_connector *physical_connector)
>>> +                   struct drm_connector **physical_connector,
>>> +                   int count)
>>>   {
>>>       struct drm_device *dev = &ast->base;
>>>       struct drm_crtc *crtc = &ast->crtc;
>>> @@ -1790,7 +1798,7 @@ static int ast_bmc_output_init(struct 
>>> ast_device *ast,
>>>           return ret;
>>>       encoder->possible_crtcs = drm_crtc_mask(crtc);
>>>   -    ret = ast_bmc_connector_init(dev, bmc_connector, 
>>> physical_connector);
>>> +    ret = ast_bmc_connector_init(dev, bmc_connector, 
>>> physical_connector, count);
>>>       if (ret)
>>>           return ret;
>>>   @@ -1852,8 +1860,8 @@ static const struct drm_mode_config_funcs 
>>> ast_mode_config_funcs = {
>>>   int ast_mode_config_init(struct ast_device *ast)
>>>   {
>>>       struct drm_device *dev = &ast->base;
>>> -    struct drm_connector *physical_connector = NULL;
>>> -    int ret;
>>> +    struct drm_connector *physical_connector[MAX_CONNECTORS] = {NULL};
>>> +    int count, ret;
>>>         ret = drmm_mutex_init(dev, &ast->modeset_lock);
>>>       if (ret)
>>> @@ -1897,27 +1905,27 @@ int ast_mode_config_init(struct ast_device 
>>> *ast)
>>>           ret = ast_vga_output_init(ast);
>>>           if (ret)
>>>               return ret;
>>> -        physical_connector = &ast->output.vga.connector;
>>> +        physical_connector[count++] = &ast->output.vga.connector;
>>>       }
>>>       if (ast->tx_chip_types & AST_TX_SIL164_BIT) {
>>>           ret = ast_sil164_output_init(ast);
>>>           if (ret)
>>>               return ret;
>>> -        physical_connector = &ast->output.sil164.connector;
>>> +        physical_connector[count++] = &ast->output.sil164.connector;
>>>       }
>>>       if (ast->tx_chip_types & AST_TX_DP501_BIT) {
>>>           ret = ast_dp501_output_init(ast);
>>>           if (ret)
>>>               return ret;
>>> -        physical_connector = &ast->output.dp501.connector;
>>> +        physical_connector[count++] = &ast->output.dp501.connector;
>>>       }
>>>       if (ast->tx_chip_types & AST_TX_ASTDP_BIT) {
>>>           ret = ast_astdp_output_init(ast);
>>>           if (ret)
>>>               return ret;
>>> -        physical_connector = &ast->output.astdp.connector;
>>> +        physical_connector[count++] = &ast->output.astdp.connector;
>>>       }
>>> -    ret = ast_bmc_output_init(ast, physical_connector);
>>> +    ret = ast_bmc_output_init(ast, physical_connector, count);
>>>       if (ret)
>>>           return ret;
>>

-- 
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)



More information about the dri-devel mailing list