[PATCH v2 09/16] drm/imx: Add i.MX8qxp Display Controller KMS
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Jul 31 13:51:33 UTC 2024
On Tue, Jul 30, 2024 at 04:31:35PM GMT, Liu Ying wrote:
> On 07/28/2024, Dmitry Baryshkov wrote:
> > On Fri, Jul 12, 2024 at 05:32:36PM GMT, Liu Ying wrote:
> >> i.MX8qxp Display Controller(DC) is comprised of three main components that
> >> include a blit engine for 2D graphics accelerations, display controller for
> >> display output processing, as well as a command sequencer. Add kernel
> >> mode setting support for the display controller part with two CRTCs and
> >> two primary planes(backed by FetchLayer and FetchWarp respectively). The
> >> registers of the display controller are accessed without command sequencer
> >> involved, instead just by using CPU. The command sequencer is supposed to
> >> be used by the blit engine.
> >
> > Generic comment: please consider moving dc_plane / dc_crtc defines to
> > the source files and dropping the headers.
>
> struct dc_crtc is referenced from dc-drv.h and dc-kms.c.
> struct dc_plane is referenced from dc-crtc.c and dc-drv.h.
>
> If no objections, I may drop dc-crtc.h and dc-plane.h,
> and move necessary stuff to dc-kms.h.
>
> >
> >>
> >> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> >> ---
> >> v2:
> >> * Find next bridge from TCon's port.
> >> * Drop drm/drm_module.h include from dc-drv.c.
> >>
> >> drivers/gpu/drm/imx/dc/Kconfig | 2 +
> >> drivers/gpu/drm/imx/dc/Makefile | 5 +-
> >> drivers/gpu/drm/imx/dc/dc-crtc.c | 578 ++++++++++++++++++++++++++++++
> >> drivers/gpu/drm/imx/dc/dc-crtc.h | 67 ++++
> >> drivers/gpu/drm/imx/dc/dc-de.h | 3 +
> >> drivers/gpu/drm/imx/dc/dc-drv.c | 236 ++++++++++++
> >> drivers/gpu/drm/imx/dc/dc-drv.h | 21 ++
> >> drivers/gpu/drm/imx/dc/dc-kms.c | 143 ++++++++
> >> drivers/gpu/drm/imx/dc/dc-kms.h | 15 +
> >> drivers/gpu/drm/imx/dc/dc-plane.c | 227 ++++++++++++
> >> drivers/gpu/drm/imx/dc/dc-plane.h | 37 ++
> >> 11 files changed, 1332 insertions(+), 2 deletions(-)
> >> create mode 100644 drivers/gpu/drm/imx/dc/dc-crtc.c
> >> create mode 100644 drivers/gpu/drm/imx/dc/dc-crtc.h
> >> create mode 100644 drivers/gpu/drm/imx/dc/dc-kms.c
> >> create mode 100644 drivers/gpu/drm/imx/dc/dc-kms.h
> >> create mode 100644 drivers/gpu/drm/imx/dc/dc-plane.c
> >> create mode 100644 drivers/gpu/drm/imx/dc/dc-plane.h
> >>
> >> diff --git a/drivers/gpu/drm/imx/dc/Kconfig b/drivers/gpu/drm/imx/dc/Kconfig
> >> index b66b815fbdf1..dac0de009273 100644
> >> --- a/drivers/gpu/drm/imx/dc/Kconfig
> >> +++ b/drivers/gpu/drm/imx/dc/Kconfig
> >> @@ -1,6 +1,8 @@
> >> config DRM_IMX8_DC
> >> tristate "Freescale i.MX8 Display Controller Graphics"
> >> depends on DRM && COMMON_CLK && OF && (ARCH_MXC || COMPILE_TEST)
> >> + select DRM_GEM_DMA_HELPER
> >> + select DRM_KMS_HELPER
> >> select GENERIC_IRQ_CHIP
> >> help
> >> enable Freescale i.MX8 Display Controller(DC) graphics support
> >> diff --git a/drivers/gpu/drm/imx/dc/Makefile b/drivers/gpu/drm/imx/dc/Makefile
> >> index 1ce3e8a8db22..b9d33c074984 100644
> >> --- a/drivers/gpu/drm/imx/dc/Makefile
> >> +++ b/drivers/gpu/drm/imx/dc/Makefile
> >> @@ -1,6 +1,7 @@
> >> # SPDX-License-Identifier: GPL-2.0
> >>
> >> -imx8-dc-drm-objs := dc-cf.o dc-de.o dc-drv.o dc-ed.o dc-fg.o dc-fl.o dc-fu.o \
> >> - dc-fw.o dc-ic.o dc-lb.o dc-pe.o dc-tc.o
> >> +imx8-dc-drm-objs := dc-cf.o dc-crtc.o dc-de.o dc-drv.o dc-ed.o dc-fg.o dc-fl.o \
> >> + dc-fu.o dc-fw.o dc-ic.o dc-kms.o dc-lb.o dc-pe.o \
> >> + dc-plane.o dc-tc.o
> >>
> >> obj-$(CONFIG_DRM_IMX8_DC) += imx8-dc-drm.o
> >> diff --git a/drivers/gpu/drm/imx/dc/dc-crtc.c b/drivers/gpu/drm/imx/dc/dc-crtc.c
> >> new file mode 100644
> >> index 000000000000..e151e14a6677
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/imx/dc/dc-crtc.c
> >> @@ -0,0 +1,578 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#include <linux/completion.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/irqreturn.h>
> >> +#include <linux/pm_runtime.h>
> >> +#include <linux/spinlock.h>
> >> +
> >> +#include <drm/drm_atomic.h>
> >> +#include <drm/drm_atomic_helper.h>
> >> +#include <drm/drm_atomic_state_helper.h>
> >> +#include <drm/drm_crtc.h>
> >> +#include <drm/drm_device.h>
> >> +#include <drm/drm_drv.h>
> >> +#include <drm/drm_managed.h>
> >> +#include <drm/drm_modes.h>
> >> +#include <drm/drm_modeset_helper_vtables.h>
> >> +#include <drm/drm_plane.h>
> >> +#include <drm/drm_vblank.h>
> >> +
> >> +#include "dc-crtc.h"
> >> +#include "dc-de.h"
> >> +#include "dc-drv.h"
> >> +#include "dc-pe.h"
> >> +#include "dc-plane.h"
> >> +
> >> +#define DC_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(c) \
> >> +do { \
> >> + unsigned long ret; \
> >> + ret = wait_for_completion_timeout(&dc_crtc->c, HZ); \
> >> + if (ret == 0) \
> >> + dc_crtc_err(crtc, "%s: wait for " #c " timeout\n", \
> >> + __func__); \
> >> +} while (0)
> >> +
> >> +#define DC_CRTC_CHECK_FRAMEGEN_FIFO(fg) \
> >> +do { \
> >> + typeof(fg) _fg = (fg); \
> >> + if (dc_fg_secondary_requests_to_read_empty_fifo(_fg)) { \
> >> + dc_fg_secondary_clear_channel_status(_fg); \
> >> + dc_crtc_err(crtc, "%s: FrameGen FIFO empty\n", \
> >> + __func__); \
> >> + } \
> >> +} while (0)
> >> +
> >> +#define DC_CRTC_WAIT_FOR_FRAMEGEN_SECONDARY_SYNCUP(fg) \
> >> +do { \
> >> + if (dc_fg_wait_for_secondary_syncup(fg)) \
> >> + dc_crtc_err(crtc, \
> >> + "%s: FrameGen secondary channel isn't syncup\n",\
> >> + __func__); \
> >> +} while (0)
> >> +
> >> +static u32 dc_crtc_get_vblank_counter(struct drm_crtc *crtc)
> >> +{
> >> + struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> >> +
> >> + return dc_fg_get_frame_index(dc_crtc->fg);
> >> +}
> >> +
> >> +static int dc_crtc_enable_vblank(struct drm_crtc *crtc)
> >> +{
> >> + struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> >> +
> >> + enable_irq(dc_crtc->irq_dec_framecomplete);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void dc_crtc_disable_vblank(struct drm_crtc *crtc)
> >> +{
> >> + struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> >> +
> >> + disable_irq_nosync(dc_crtc->irq_dec_framecomplete);
> >> +}
> >> +
> >> +static irqreturn_t
> >> +dc_crtc_dec_framecomplete_irq_handler(int irq, void *dev_id)
> >> +{
> >> + struct dc_crtc *dc_crtc = dev_id;
> >> + struct drm_crtc *crtc = &dc_crtc->base;
> >> + unsigned long flags;
> >> +
> >> + drm_crtc_handle_vblank(crtc);
> >> +
> >> + spin_lock_irqsave(&crtc->dev->event_lock, flags);
> >> + if (dc_crtc->event) {
> >> + drm_crtc_send_vblank_event(crtc, dc_crtc->event);
> >> + dc_crtc->event = NULL;
> >> + drm_crtc_vblank_put(crtc);
> >> + }
> >> + spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
> >> +
> >> + return IRQ_HANDLED;
> >> +}
> >> +
> >> +static irqreturn_t dc_crtc_common_irq_handler(int irq, void *dev_id)
> >> +{
> >> + struct dc_crtc *dc_crtc = dev_id;
> >> + struct drm_crtc *crtc = &dc_crtc->base;
> >> +
> >> + if (irq == dc_crtc->irq_dec_seqcomplete) {
> >> + complete(&dc_crtc->dec_seqcomplete_done);
> >> + } else if (irq == dc_crtc->irq_dec_shdld) {
> >> + complete(&dc_crtc->dec_shdld_done);
> >> + } else if (irq == dc_crtc->irq_ed_cont_shdld) {
> >> + complete(&dc_crtc->ed_cont_shdld_done);
> >> + } else if (irq == dc_crtc->irq_ed_safe_shdld) {
> >> + complete(&dc_crtc->ed_safe_shdld_done);
> >> + } else {
> >> + dc_crtc_err(crtc, "invalid CRTC irq(%u)\n", irq);
> >> + return IRQ_NONE;
> >
> > And this is a counter-example to my previous questions. If you had 4
> > separate handlers, there would have been no need for the futile "invalid
> > CRTC" error, because it would not be possible at all.
>
> Ok, will drop the else clause. Thanks.
>
> >
> >> + }
> >> +
> >> + return IRQ_HANDLED;
> >> +}
> >> +
> >> +static const struct drm_crtc_funcs dc_crtc_funcs = {
> >> + .reset = drm_atomic_helper_crtc_reset,
> >> + .destroy = drm_crtc_cleanup,
> >> + .set_config = drm_atomic_helper_set_config,
> >> + .page_flip = drm_atomic_helper_page_flip,
> >> + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> >> + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> >> + .get_vblank_counter = dc_crtc_get_vblank_counter,
> >> + .enable_vblank = dc_crtc_enable_vblank,
> >> + .disable_vblank = dc_crtc_disable_vblank,
> >> + .get_vblank_timestamp = drm_crtc_vblank_helper_get_vblank_timestamp,
> >> +};
> >> +
> >> +static void dc_crtc_queue_state_event(struct drm_crtc_state *crtc_state)
> >> +{
> >> + struct drm_crtc *crtc = crtc_state->crtc;
> >> + struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> >> +
> >> + spin_lock_irq(&crtc->dev->event_lock);
> >> + if (crtc_state->event) {
> >> + WARN_ON(drm_crtc_vblank_get(crtc));
> >> + WARN_ON(dc_crtc->event);
> >> + dc_crtc->event = crtc_state->event;
> >> + crtc_state->event = NULL;
> >> + }
> >> + spin_unlock_irq(&crtc->dev->event_lock);
> >> +}
> >> +
> >> +static enum drm_mode_status
> >> +dc_crtc_check_clock(struct dc_crtc *dc_crtc, int clk_khz)
> >> +{
> >> + return dc_fg_check_clock(dc_crtc->fg, clk_khz);
> >> +}
> >> +
> >> +static enum drm_mode_status
> >> +dc_crtc_mode_valid(struct drm_crtc *crtc, const struct drm_display_mode *mode)
> >> +{
> >> + struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> >> + enum drm_mode_status status;
> >> +
> >> + status = dc_crtc_check_clock(dc_crtc, mode->clock);
> >> + if (status != MODE_OK)
> >> + return status;
> >> +
> >> + if (mode->crtc_clock > DC_FRAMEGEN_MAX_CLOCK_KHZ)
> >> + return MODE_CLOCK_HIGH;
> >> +
> >> + return MODE_OK;
> >> +}
> >> +
> >> +static int
> >> +dc_crtc_atomic_check(struct drm_crtc *crtc, struct drm_atomic_state *state)
> >> +{
> >> + struct drm_crtc_state *new_crtc_state =
> >> + drm_atomic_get_new_crtc_state(state, crtc);
> >> + struct drm_display_mode *adj = &new_crtc_state->adjusted_mode;
> >> + struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> >> + enum drm_mode_status status;
> >> +
> >> + status = dc_crtc_check_clock(dc_crtc, adj->clock);
> >> + if (status != MODE_OK)
> >> + return -EINVAL;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void
> >> +dc_crtc_atomic_begin(struct drm_crtc *crtc, struct drm_atomic_state *state)
> >> +{
> >> + struct drm_crtc_state *new_crtc_state =
> >> + drm_atomic_get_new_crtc_state(state, crtc);
> >> + struct dc_drm_device *dc_drm = to_dc_drm_device(crtc->dev);
> >> + struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> >> + int idx, ret;
> >> +
> >> + if (!drm_atomic_crtc_needs_modeset(new_crtc_state) ||
> >> + !new_crtc_state->active)
> >> + return;
> >
> > Why? Can it be called under such conditions?
>
> This is needed to make sure the balance of calling
> pm_runtime_resume_and_get(dc_crtc->pe->dev)
> from dc_crtc_atomic_begin() and calling
> pm_runtime_put(dc_crtc->pe->dev)
> from dc_crtc_atomic_disable().
>
> pm_runtime_resume_and_get(dc_crtc->pe->dev) is called
> only when the CRTC is to be enabled with a modeset
> commit.
>
> >
> >> +
> >> + if (!drm_dev_enter(crtc->dev, &idx))
> >> + return;
> >
> > Can you please give an example of a driver using drm_dev_enter()/_exit()
> > in DRM callbacks?
>
> vc4.
>
> BTW, this is required by Maxime, as noted in cover letter.
>
> >
> >> +
> >> + /* request pixel engine power-on when CRTC starts to be active */
> >> + ret = pm_runtime_resume_and_get(dc_crtc->pe->dev);
> >
> > This function doesn't return an error. So if pm_runtime_resume_and_get()
>
> Kerneldoc of pm_runtime_resume_and_get() mentions error code.
> '
> or a negative error code otherwise
> '
> So, it may return an error.
>
> > didn't increment the counter, corresponding pm_runtime_put() might cause
> > an underflow. Instead void functions should use pm_runtime_get_sync()
>
> pm_runtime_resume_and_get() is called from dc_crtc_atomic_begin(), which
> is atomic considering the general DRM atomic KMS idea. So, if the call
> returns an error, the best we can do is to print the error out like
> this driver does IMO. The call should not fail in the first place due
> to the "atomic" sense, though it can fail in theory.
>
> pm_runtime_get_sync() may also return an error. And it's Kerneldoc kinda
> says pm_runtime_resume_and_get() is better.
> '
> Consider using pm_runtime_resume_and_get() instead of it, especially
> if its return value is checked by the caller, as this is likely to result
> in cleaner code.
> '
>
> >
> > Also can any of the code running afterwards result in the unclocked
> > exception if resume fails?
>
> Yes. But, it's all atomic anyway...
>
> >
> >> + if (ret)
> >> + dc_crtc_err(crtc, "failed to get DC pixel engine RPM: %d\n",
> >> + ret);
> >> +
> >> + atomic_inc(&dc_drm->pe_rpm_count);
> >
> > Why do you need a separate RPM count? RPM code already has one.
>
> If no objections, I will drop the count and call
> pm_runtime_active(dc_crtc->pe->dev) from dc_crtc_disable_at_unbind().
Why do you need the disable_at_unbind() thing? Doesn't shutdown take
care of disabling it for you?
>
> Thanks.
>
> >
> >> +
> >> + drm_dev_exit(idx);
> >> +}
> >> +
> >
> >
> > [...]
> >
> >> +
> >> +static int
> >> +dc_crtc_request_irq(struct dc_crtc *dc_crtc, struct device *dev,
> >> + unsigned int irq,
> >> + irqreturn_t (*irq_handler)(int irq, void *dev_id))
> >> +{
> >> + int ret;
> >> +
> >> + ret = request_irq(irq, irq_handler, IRQF_NO_AUTOEN, dev_name(dev),
> >> + dc_crtc);
> >> + if (ret < 0)
> >> + dev_err(dev, "failed to request irq(%u): %d\n", irq, ret);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static int dc_crtc_request_irqs(struct drm_device *drm, struct dc_crtc *dc_crtc)
> >> +{
> >> + struct {
> >> + struct device *dev;
> >> + unsigned int irq;
> >> + irqreturn_t (*irq_handler)(int irq, void *dev_id);
> >> + } irqs[] = {
> >> + {
> >> + dc_crtc->de->dev,
> >> + dc_crtc->irq_dec_framecomplete,
> >> + dc_crtc_dec_framecomplete_irq_handler,
> >> + }, {
> >> + dc_crtc->de->dev,
> >> + dc_crtc->irq_dec_seqcomplete,
> >> + dc_crtc_common_irq_handler,
> >> + }, {
> >> + dc_crtc->de->dev,
> >> + dc_crtc->irq_dec_shdld,
> >> + dc_crtc_common_irq_handler,
> >> + }, {
> >> + dc_crtc->ed_cont->dev,
> >> + dc_crtc->irq_ed_cont_shdld,
> >> + dc_crtc_common_irq_handler,
> >> + }, {
> >> + dc_crtc->ed_safe->dev,
> >> + dc_crtc->irq_ed_safe_shdld,
> >> + dc_crtc_common_irq_handler,
> >> + },
> >> + };
> >> + struct drm_crtc *crtc = &dc_crtc->base;
> >> + int i, ret;
> >> +
> >> + dc_crtc->irqs = drmm_kcalloc(drm, ARRAY_SIZE(irqs),
> >> + sizeof(*dc_crtc->irqs), GFP_KERNEL);
> >
> > Using array would remove the necessity to call drmm_kcalloc here().
>
> Ok, I may use a macro to define the array size instead.
>
> #define DC_CRTC_IRQS 5
Just embed the array into dc_crtc, no need for extra defines.
>
>
> >
> >> + if (!dc_crtc->irqs) {
> >> + dev_err(drm->dev, "failed to allocate CRTC%u irqs\n",
> >> + crtc->index);
> >> + return -ENOMEM;
> >> + }
> >> +
> >> + for (i = 0; i < ARRAY_SIZE(irqs); i++) {
> >> + struct dc_crtc_irq *irq = &dc_crtc->irqs[i];
> >> +
> >> + ret = dc_crtc_request_irq(dc_crtc, irqs[i].dev, irqs[i].irq,
> >> + irqs[i].irq_handler);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + irq->dc_crtc = dc_crtc;
> >> + irq->irq = irqs[i].irq;
> >> +
> >> + ret = drmm_add_action_or_reset(drm, dc_crtc_free_irq, irq);
> >
> > Can you use devm_request_irq() instead?
>
> No.
>
> The requested irqs would be freed too late as devm_of_platform_populate()
> is called early from dc_probe(). They would be freed later than the time
> point where irq domain is removed from dc_ic_unbind(). That would cause
> a kernel Oops as I tried.
Ohh, you are using drmm here. Please don't use drmm for IRQ domains.
>
> >
> >> + if (ret)
> >> + return ret;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >
> > [...]
> >
> >> +
> >> +static int dc_kms_init_encoder_per_crtc(struct dc_drm_device *dc_drm,
> >> + int crtc_index)
> >> +{
> >> + struct dc_crtc *dc_crtc = &dc_drm->dc_crtc[crtc_index];
> >> + struct drm_device *drm = &dc_drm->base;
> >> + struct drm_crtc *crtc = &dc_crtc->base;
> >> + struct drm_connector *connector;
> >> + struct device *dev = drm->dev;
> >> + struct drm_encoder *encoder;
> >> + struct device_node *remote;
> >> + struct drm_bridge *bridge;
> >> + int ret = 0;
> >> +
> >> + remote = of_graph_get_remote_node(dc_crtc->de->tc->dev->of_node, 0, -1);
> >> + if (!of_device_is_available(remote))
> >> + goto out;
> >> +
> >> + bridge = of_drm_find_bridge(remote);
> >
> > drm_of_find_panel_or_bridge() instead.
>
> Nope.
>
> The first bridge is always pixel combiner according to SoC design.
> It can't be a panel.
So pass NULL as a panel pointer. At least it saves you from calling
of_graph_get_remote_node() manually.
> >> + if (!bridge) {
> >> + ret = -EPROBE_DEFER;
> >> + dev_err_probe(dev, ret, "failed to find bridge for CRTC%u\n",
> >> + crtc->index);
> >> + goto out;
> >> + }
> >> +
> >> + encoder = &dc_drm->encoder[crtc_index];
> >> + ret = drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_NONE);
> >> + if (ret) {
> >> + dev_err(dev, "failed to initialize encoder for CRTC%u: %d\n",
> >> + crtc->index, ret);
> >> + goto out;
> >> + }
> >> +
> >> + encoder->possible_crtcs = drm_crtc_mask(crtc);
> >> +
> >> + ret = drm_bridge_attach(encoder, bridge, NULL,
> >> + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> >> + if (ret) {
> >> + dev_err(dev,
> >> + "failed to attach bridge to encoder for CRTC%u: %d\n",
> >> + crtc->index, ret);
> >> + goto out;
> >> + }
> >> +
> >> + connector = drm_bridge_connector_init(drm, encoder);
> >> + if (IS_ERR(connector)) {
> >> + ret = PTR_ERR(connector);
> >> + dev_err(dev, "failed to init bridge connector for CRTC%u: %d\n",
> >> + crtc->index, ret);
> >> + goto out;
> >> + }
> >> +
> >> + ret = drm_connector_attach_encoder(connector, encoder);
> >> + if (ret)
> >> + dev_err(dev,
> >> + "failed to attach encoder to connector for CRTC%u: %d\n",
> >> + crtc->index, ret);
> >> +
> >> +out:
> >> + of_node_put(remote);
> >> + return ret;
> >> +}
> >> +
> >> +int dc_kms_init(struct dc_drm_device *dc_drm)
> >> +{
> >> + struct drm_device *drm = &dc_drm->base;
> >> + int ret, i;
> >> +
> >> + ret = drmm_mode_config_init(drm);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + atomic_set(&dc_drm->pe_rpm_count, 0);
> >> +
> >> + drm->mode_config.min_width = 60;
> >> + drm->mode_config.min_height = 60;
> >> + drm->mode_config.max_width = 8192;
> >> + drm->mode_config.max_height = 8192;
> >> + drm->mode_config.funcs = &dc_drm_mode_config_funcs;
> >> +
> >> + drm->vblank_disable_immediate = true;
> >> + drm->max_vblank_count = DC_FRAMEGEN_MAX_FRAME_INDEX;
> >> +
> >> + for (i = 0; i < DC_CRTCS; i++) {
> >> + ret = dc_crtc_init(dc_drm, i);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + ret = dc_kms_init_encoder_per_crtc(dc_drm, i);
> >> + if (ret)
> >> + return ret;
> >> + }
> >> +
> >> + ret = drm_vblank_init(drm, DC_CRTCS);
> >> + if (ret) {
> >> + dev_err(drm->dev, "failed to init vblank support: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + drm_mode_config_reset(drm);
> >> +
> >> + drm_kms_helper_poll_init(drm);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +void dc_kms_uninit(struct dc_drm_device *dc_drm)
> >> +{
> >> + drm_kms_helper_poll_fini(&dc_drm->base);
> >> +}
> >> diff --git a/drivers/gpu/drm/imx/dc/dc-kms.h b/drivers/gpu/drm/imx/dc/dc-kms.h
> >> new file mode 100644
> >> index 000000000000..4f66b11c106a
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/imx/dc/dc-kms.h
> >> @@ -0,0 +1,15 @@
> >> +/* SPDX-License-Identifier: GPL-2.0+ */
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#ifndef __DC_KMS_H__
> >> +#define __DC_KMS_H__
> >> +
> >> +#include "dc-de.h"
> >> +
> >> +#define DC_CRTCS DC_DISPLAYS
> >> +#define DC_ENCODERS DC_DISPLAYS
> >> +#define DC_PRIMARYS DC_DISPLAYS
> >
> > If they are all equal, why do you need separate defines?
>
> Hmm, just for meaningful macro names to make code easy to read.
>From my POV it makes code harder to read, as the reviewer has to keep in
mind that those values are all the same.
>
> >
> >> +
> >> +#endif /* __DC_KMS_H__ */
> >> diff --git a/drivers/gpu/drm/imx/dc/dc-plane.c b/drivers/gpu/drm/imx/dc/dc-plane.c
> >> new file mode 100644
> >> index 000000000000..a49b043ca167
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/imx/dc/dc-plane.c
> >> @@ -0,0 +1,227 @@
> >> +// SPDX-License-Identifier: GPL-2.0+
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#include <drm/drm_atomic.h>
> >> +#include <drm/drm_atomic_helper.h>
> >> +#include <drm/drm_atomic_state_helper.h>
> >> +#include <drm/drm_crtc.h>
> >> +#include <drm/drm_drv.h>
> >> +#include <drm/drm_fb_dma_helper.h>
> >> +#include <drm/drm_fourcc.h>
> >> +#include <drm/drm_framebuffer.h>
> >> +#include <drm/drm_gem_atomic_helper.h>
> >> +#include <drm/drm_plane_helper.h>
> >> +
> >> +#include "dc-drv.h"
> >> +#include "dc-fu.h"
> >> +#include "dc-plane.h"
> >> +
> >> +#define DC_PLANE_MAX_PITCH 0x10000
> >> +#define DC_PLANE_MAX_PIX_CNT 8192
> >> +
> >> +static const uint32_t dc_plane_formats[] = {
> >> + DRM_FORMAT_XRGB8888,
> >> +};
> >> +
> >> +static const struct drm_plane_funcs dc_plane_funcs = {
> >> + .update_plane = drm_atomic_helper_update_plane,
> >> + .disable_plane = drm_atomic_helper_disable_plane,
> >> + .destroy = drm_plane_cleanup,
> >> + .reset = drm_atomic_helper_plane_reset,
> >> + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> >> + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> >> +};
> >> +
> >> +static int dc_plane_check_no_off_screen(struct drm_plane_state *state,
> >> + struct drm_crtc_state *crtc_state)
> >> +{
> >> + if (state->dst.x1 < 0 || state->dst.y1 < 0 ||
> >> + state->dst.x2 > crtc_state->adjusted_mode.hdisplay ||
> >> + state->dst.y2 > crtc_state->adjusted_mode.vdisplay) {
> >> + dc_plane_dbg(state->plane, "no off screen\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int dc_plane_check_max_source_resolution(struct drm_plane_state *state)
> >> +{
> >> + int src_h = drm_rect_height(&state->src) >> 16;
> >> + int src_w = drm_rect_width(&state->src) >> 16;
> >> +
> >> + if (src_w > DC_PLANE_MAX_PIX_CNT || src_h > DC_PLANE_MAX_PIX_CNT) {
> >> + dc_plane_dbg(state->plane, "invalid source resolution\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int dc_plane_check_fb(struct drm_plane_state *state)
> >> +{
> >> + struct drm_framebuffer *fb = state->fb;
> >> + dma_addr_t baseaddr = drm_fb_dma_get_gem_addr(fb, state, 0);
> >> +
> >> + /* base address alignment */
> >> + if (baseaddr & 0x3) {
> >> + dc_plane_dbg(state->plane, "fb bad baddr alignment\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + /* pitches[0] range */
> >> + if (fb->pitches[0] > DC_PLANE_MAX_PITCH) {
> >> + dc_plane_dbg(state->plane, "fb pitches[0] is out of range\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + /* pitches[0] alignment */
> >> + if (fb->pitches[0] & 0x3) {
> >> + dc_plane_dbg(state->plane, "fb bad pitches[0] alignment\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int
> >> +dc_plane_atomic_check(struct drm_plane *plane, struct drm_atomic_state *state)
> >> +{
> >> + struct drm_plane_state *plane_state =
> >> + drm_atomic_get_new_plane_state(state, plane);
> >> + struct drm_crtc_state *crtc_state;
> >> + int ret;
> >> +
> >> + /* ok to disable */
> >> + if (!plane_state->fb)
> >> + return 0;
> >> +
> >> + if (!plane_state->crtc) {
> >> + dc_plane_dbg(plane, "no CRTC in plane state\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + crtc_state =
> >> + drm_atomic_get_existing_crtc_state(state, plane_state->crtc);
> >> + if (WARN_ON(!crtc_state))
> >> + return -EINVAL;
> >> +
> >> + ret = drm_atomic_helper_check_plane_state(plane_state, crtc_state,
> >> + DRM_PLANE_NO_SCALING,
> >> + DRM_PLANE_NO_SCALING,
> >> + true, false);
> >> + if (ret) {
> >> + dc_plane_dbg(plane, "failed to check plane state: %d\n", ret);
> >> + return ret;
> >> + }
> >> +
> >> + ret = dc_plane_check_no_off_screen(plane_state, crtc_state);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + ret = dc_plane_check_max_source_resolution(plane_state);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + return dc_plane_check_fb(plane_state);
> >> +}
> >> +
> >> +static void
> >> +dc_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state)
> >> +{
> >> + struct drm_plane_state *new_state =
> >> + drm_atomic_get_new_plane_state(state, plane);
> >> + struct dc_plane *dplane = to_dc_plane(plane);
> >> + struct drm_framebuffer *fb = new_state->fb;
> >> + const struct dc_fu_ops *fu_ops;
> >> + struct dc_lb *lb = dplane->lb;
> >> + struct dc_fu *fu = dplane->fu;
> >> + dma_addr_t baseaddr;
> >> + int src_w, src_h;
> >> + int idx;
> >> +
> >> + if (!drm_dev_enter(plane->dev, &idx))
> >> + return;
> >> +
> >> + src_w = drm_rect_width(&new_state->src) >> 16;
> >> + src_h = drm_rect_height(&new_state->src) >> 16;
> >> +
> >> + baseaddr = drm_fb_dma_get_gem_addr(fb, new_state, 0);
> >> +
> >> + fu_ops = dc_fu_get_ops(dplane->fu);
> >> +
> >> + fu_ops->set_layerblend(fu, lb);
> >> + fu_ops->set_burstlength(fu, baseaddr);
> >> + fu_ops->set_src_stride(fu, fb->pitches[0]);
> >> + fu_ops->set_src_buf_dimensions(fu, src_w, src_h);
> >> + fu_ops->set_fmt(fu, fb->format);
> >> + fu_ops->set_framedimensions(fu, src_w, src_h);
> >> + fu_ops->set_baseaddress(fu, baseaddr);
> >> + fu_ops->enable_src_buf(fu);
> >
> > Are you expecting that these ops might change? Can you call the function
> > directly?
>
> Looking at struct dc_fl and struct dc_fw, you may find struct dc_fu
> is the base class. These function calls take struct dc_fu as
> arguments so that derived instances may specify their implementations.
>
> So, I can't call their implementation functions directly.
Ack.
>
> >
> >> +
> >> + dc_plane_dbg(plane, "uses %s\n", fu_ops->get_name(fu));
> >> +
> >> + dc_lb_pec_dynamic_prim_sel(lb, dc_cf_get_link_id(dplane->cf));
> >> + dc_lb_pec_dynamic_sec_sel(lb, fu_ops->get_link_id(fu));
> >> + dc_lb_mode(lb, LB_BLEND);
> >> + dc_lb_blendcontrol(lb);
> >> + dc_lb_position(lb, new_state->dst.x1, new_state->dst.y1);
> >> + dc_lb_pec_clken(lb, CLKEN_AUTOMATIC);
> >> +
> >> + dc_plane_dbg(plane, "uses LayerBlend%u\n", dc_lb_get_id(lb));
> >> +
> >> + /* set ExtDst's source to LayerBlend */
> >> + dc_ed_pec_src_sel(dplane->ed, dc_lb_get_link_id(lb));
> >> +
> >> + drm_dev_exit(idx);
> >> +}
> >> +
> >> +static void dc_plane_atomic_disable(struct drm_plane *plane,
> >> + struct drm_atomic_state *state)
> >> +{
> >> + struct dc_plane *dplane = to_dc_plane(plane);
> >> + const struct dc_fu_ops *fu_ops;
> >> + int idx;
> >> +
> >> + if (!drm_dev_enter(plane->dev, &idx))
> >> + return;
> >> +
> >> + /* disable fetchunit in shadow */
> >> + fu_ops = dc_fu_get_ops(dplane->fu);
> >> + fu_ops->disable_src_buf(dplane->fu);
> >> +
> >> + /* set ExtDst's source to ConstFrame */
> >> + dc_ed_pec_src_sel(dplane->ed, dc_cf_get_link_id(dplane->cf));
> >> +
> >> + drm_dev_exit(idx);
> >> +}
> >> +
> >> +static const struct drm_plane_helper_funcs dc_plane_helper_funcs = {
> >> + .atomic_check = dc_plane_atomic_check,
> >> + .atomic_update = dc_plane_atomic_update,
> >> + .atomic_disable = dc_plane_atomic_disable,
> >> +};
> >> +
> >> +int dc_plane_init(struct dc_drm_device *dc_drm, struct dc_plane *dc_plane)
> >> +{
> >> + struct drm_plane *plane = &dc_plane->base;
> >> + int ret;
> >> +
> >> + ret = drm_universal_plane_init(&dc_drm->base, plane, 0, &dc_plane_funcs,
> >> + dc_plane_formats,
> >> + ARRAY_SIZE(dc_plane_formats),
> >> + NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + drm_plane_helper_add(plane, &dc_plane_helper_funcs);
> >> +
> >> + dc_plane->fu = dc_drm->pe->fu_disp[plane->index];
> >> + dc_plane->cf = dc_drm->pe->cf_cont[plane->index];
> >> + dc_plane->lb = dc_drm->pe->lb[plane->index];
> >> + dc_plane->ed = dc_drm->pe->ed_cont[plane->index];
> >> +
> >> + return 0;
> >> +}
> >> diff --git a/drivers/gpu/drm/imx/dc/dc-plane.h b/drivers/gpu/drm/imx/dc/dc-plane.h
> >> new file mode 100644
> >> index 000000000000..e72c3a7cb66f
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/imx/dc/dc-plane.h
> >> @@ -0,0 +1,37 @@
> >> +/* SPDX-License-Identifier: GPL-2.0+ */
> >> +/*
> >> + * Copyright 2024 NXP
> >> + */
> >> +
> >> +#ifndef __DC_PLANE_H__
> >> +#define __DC_PLANE_H__
> >> +
> >> +#include <linux/container_of.h>
> >> +
> >> +#include <drm/drm_plane.h>
> >> +#include <drm/drm_print.h>
> >> +
> >> +#include "dc-fu.h"
> >> +#include "dc-pe.h"
> >> +
> >> +#define dc_plane_dbg(plane, fmt, ...) \
> >> +do { \
> >> + typeof(plane) _plane = (plane); \
> >> + drm_dbg_kms(_plane->dev, "[PLANE:%d:%s] " fmt, \
> >> + _plane->base.id, _plane->name, ##__VA_ARGS__); \
> >> +} while (0)
> >> +
> >> +struct dc_plane {
> >> + struct drm_plane base;
> >> + struct dc_fu *fu;
> >> + struct dc_cf *cf;
> >> + struct dc_lb *lb;
> >> + struct dc_ed *ed;
> >> +};
> >> +
> >> +static inline struct dc_plane *to_dc_plane(struct drm_plane *plane)
> >> +{
> >> + return container_of(plane, struct dc_plane, base);
> >> +}
> >> +
> >> +#endif /* __DC_PLANE_H__ */
> >> --
> >> 2.34.1
> >>
> >
>
> --
> Regards,
> Liu Ying
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list