[PATCH V3 2/2] drm/bridge: samsung-dsim: Fix porch calcalcuation rounding
Adam Ford
aford173 at gmail.com
Sat Jun 1 14:41:02 UTC 2024
The VFP, HBP, and HSA are divided between the available lanes if
there is more than one lane. For certain timings and lane
configurations, the HFP may not be evenly divisible. If the HFP
is rounded down, it ends up being too small which can cause some
monitors to not sync properly. In these instances, adjust htotal
and hsync to round the HFP up, and recalculate the htotal.
This allows 720P-60 to operation on an i.MX8MP with a four-lane
configuration.
Tested-by: Frieder Schrempf <frieder.schrempf at kontron.de> # Kontron BL i.MX8MM with HDMI monitor
Signed-off-by: Adam Ford <aford173 at gmail.com>
---
V2: No changes
V3: Remove the MIPI_DSI_MODE_VIDEO_SYNC_PULSE conditional as
requested by Marek Vasut.
Removed the Tested-by from Szyprowski because I don't know
if removing the conditional will impact his boards.
Update commit message
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 8476650c477c..e7e53a9e42af 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1606,6 +1606,27 @@ static int samsung_dsim_atomic_check(struct drm_bridge *bridge,
adjusted_mode->flags |= (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
}
+ /*
+ * When using video sync pulses, the HFP, HBP, and HSA are divided between
+ * the available lanes if there is more than one lane. For certain
+ * timings and lane configurations, the HFP may not be evenly divisible.
+ * If the HFP is rounded down, it ends up being too small which can cause
+ * some monitors to not sync properly. In these instances, adjust htotal
+ * and hsync to round the HFP up, and recalculate the htotal. Through trial
+ * and error, it appears that the HBP and HSA do not appearto need the same
+ * correction that HFP does.
+ */
+ if (dsi->lanes > 1) {
+ int hfp = adjusted_mode->hsync_start - adjusted_mode->hdisplay;
+ int remainder = hfp % dsi->lanes;
+
+ if (remainder) {
+ adjusted_mode->hsync_start += remainder;
+ adjusted_mode->hsync_end += remainder;
+ adjusted_mode->htotal += remainder;
+ }
+ }
+
return 0;
}
--
2.43.0
More information about the dri-devel
mailing list