[PATCH 3/6] dt-bindings: gpu: powervr-rogue: Add MediaTek MT8173 GPU

Chen-Yu Tsai wenst at chromium.org
Tue Jun 4 04:21:46 UTC 2024


On Fri, May 31, 2024 at 10:25 PM Adam Ford <aford173 at gmail.com> wrote:
>
> On Fri, May 31, 2024 at 8:37 AM Frank Binns <Frank.Binns at imgtec.com> wrote:
> >
> > Hi ChenYu,
> >
> > On Thu, 2024-05-30 at 16:35 +0800, Chen-Yu Tsai wrote:
> > > The MediaTek MT8173 comes with a PowerVR Rogue GX6250, which is one
> > > of the Series6XT GPUs, another sub-family of the Rogue family.
> >
> > I've added Adam Ford who sent out some DT related patches [1] for the Renesas
> > variant of GX6250 and the GX6650 (another Series6XT GPU).
> >
>
> Thanks for including me.
>
> > >
> > > This was part of the very first few versions of the PowerVR submission,
> > > but was later dropped. The compatible string has been updated to follow
> > > the new naming scheme adopted for the AXE series.
> > >
> > > In a previous iteration of the PowerVR binding submission [1], the
> > > number of clocks required for the 6XT family was mentioned to be
> > > always 3. This is also reflected here.
> > >
> > > [1] https://lore.kernel.org/dri-devel/6eeccb26e09aad67fb30ffcd523c793a43c79c2a.camel@imgtec.com/
> > >
> > > Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> > > ---
> > >  .../bindings/gpu/img,powervr-rogue.yaml       | 24 +++++++++++++++----
> > >  1 file changed, 20 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
> > > index 256e252f8087..48aa205b66b4 100644
> > > --- a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
> > > +++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
> > > @@ -12,10 +12,17 @@ maintainers:
> > >
> > >  properties:
> > >    compatible:
> > > -    items:
> > > -      - enum:
> > > -          - ti,am62-gpu
> > > -      - const: img,img-axe # IMG AXE GPU model/revision is fully discoverable
> > > +    oneOf:
> > > +      - items:
> > > +          - enum:
> > > +              - mediatek,mt8173-gpu
> > > +          # PowerVR 6XT GPU model/revision is fully discoverable
> > > +          - const: img,powervr-6xt
> > > +      - items:
> > > +          - enum:
> > > +              - ti,am62-gpu
> > > +          # IMG AXE GPU model/revision is fully discoverable
> > > +          - const: img,img-axe
> >
> > The Series6XT GPU models have differing numbers of power domains (either 2, 4 or
> > 5). Whereas, the AXE GPUs have a single power domain, so I assume there should
> > be a related change here.
> >
> > The GX6250 has two power domains (lets call them A and B). There's a constraint
> > that if domain B is powered then domain A must also be powered.
> >
> > In patch 6 [2] it's setting the power domain to MT8173_POWER_DOMAIN_MFG, which I
> > believe corresponds to power domain B. I assume this works because the MTK power
> > controller driver is encoding the constraint above, meaning that when we disable
> > or enable MT8173_POWER_DOMAIN_MFG it's also disabling/enabling MT8173_POWER_DOMA
> > IN_MFG_2D (domain A).
> >
>
> In the cover letter of this series, it was noted that the GPU
> enumerates, but it doesn' fully function yet.  This is also the case
> for both of the Renesas variants I have been testing, and I was nicely
> asked to postpone my series until the driver was closer to being
> ready.

Yeah. Frank laid out the current state of GX6250 support and future plans
in his reply to the clk driver patch.

> Even if the driver isn't ready yet, it would be nice to move the
> bindings forward.

Agreed. It would be nice to have an agreed upon set of bindings. We
can then move our downstream stuff comply with it.


Thanks
ChenYu

> adam
>
> > Thanks
> > Frank
> >
> > [1] https://lists.freedesktop.org/archives/dri-devel/2024-February/443548.html
> > [2] https://lists.freedesktop.org/archives/dri-devel/2024-May/455833.html
> >
> > >
> > >    reg:
> > >      maxItems: 1
> > > @@ -56,6 +63,15 @@ allOf:
> > >        properties:
> > >          clocks:
> > >            maxItems: 1
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          contains:
> > > +            const: img,powervr-6xt
> > > +    then:
> > > +      properties:
> > > +        clocks:
> > > +          minItems: 3
> > >
> > >  examples:
> > >    - |


More information about the dri-devel mailing list