[PATCH v5 0/9] drm/msm: make use of the HDMI connector infrastructure
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Jun 7 13:22:57 UTC 2024
This patchset sits on top Maxime's HDMI connector patchset ([1]).
Currently this is an RFC exploring the interface between HDMI bridges
and HDMI connector code. This has been lightly verified on the Qualcomm
DB820c, which has native HDMI output. If this approach is considered to
be acceptable, I'll finish MSM HDMI bridge conversion (reworking the
Audio Infoframe code). Other bridges can follow the same approach (we
have lt9611 / lt9611uxc / adv7511 on Qualcomm hardware).
[1] https://patchwork.freedesktop.org/series/122421/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
Changes in v5:
- Made drm_bridge_funcs::hdmi_clear_infoframe() callback mandatory for
DRM_BRIDGE_OP_HDMI bridges (Maxime)
- Added drm_atomic_helper_connector_hdmi_disable_audio_infoframe()
instead of passing NULL frame to
drm_atomic_helper_connector_hdmi_update_audio_infoframe() (Maxime)
- Disable Audio Infoframe in MSM HDMI driver on audio shutdown.
- Link to v4: https://lore.kernel.org/r/20240531-bridge-hdmi-connector-v4-0-5110f7943622@linaro.org
Changes in v4:
- Reworked drm_bridge_connector functions to remove ternary operators
and to reduce indentation level (Maxime)
- Added hdmi_ prefix to all HDMI-related drm_bridge_funcs calls (Maxime)
- Made vendor and product mandatory to the HDMI bridges (Maxime)
- Documented that max_bpc can be 8, 10 or 12 (Maxime)
- Changed hdmi->pixclock to be set using tmds_char_rate instead of
calculating that manually (Maxime)
- Changed mode_valid to use helper function instead of manually
doing mode->clock * 1000
- Removed hdmi_mode in favour of connector->display_info.is_hdmi
- Link to v3: https://lore.kernel.org/r/20240530-bridge-hdmi-connector-v3-0-a1d184d68fe3@linaro.org
Changes in v3:
- Rebased on top of the merged HDMI connector patchset.
- Changed drm_bridge_connector to use drmm_connector_init() (Maxime)
- Added a check that write_infoframe callback is present if
BRIDGE_OP_HDMI is set.
- Moved drm_atomic_helper_connector_hdmi_check() call from
drm_bridge_connector to the HDMI bridge driver to remove dependency
from drm_kms_helpers on the optional HDMI state helpers.
- Converted Audio InfoFrame handling code.
- Added support for HDMI Vendor Specific and SPD InfoFrames.
- Link to v2: https://lore.kernel.org/r/20240309-bridge-hdmi-connector-v2-0-1380bea3ee70@linaro.org
Changes in v2:
- Dropped drm_connector_hdmi_setup(). Instead added
drm_connector_hdmi_init() to be used by drm_bridge_connector.
- Changed the drm_bridge_connector to act as a proxy for the HDMI
connector infrastructure. This removes most of the logic from
the bridge drivers.
- Link to v1: https://lore.kernel.org/r/20240308-bridge-hdmi-connector-v1-0-90b693550260@linaro.org
---
Dmitry Baryshkov (9):
drm/connector: hdmi: allow disabling Audio Infoframe
drm/bridge-connector: switch to using drmm allocations
drm/bridge-connector: implement glue code for HDMI connector
drm/msm/hdmi: switch to atomic bridge callbacks
drm/msm/hdmi: turn mode_set into atomic_enable
drm/msm/hdmi: make use of the drm_connector_hdmi framework
drm/msm/hdmi: get rid of hdmi_mode
drm/msm/hdmi: update HDMI_GEN_PKT_CTRL_GENERIC0_UPDATE definition
drm/msm/hdmi: also send the SPD and HDMI Vendor Specific InfoFrames
drivers/gpu/drm/display/drm_hdmi_state_helper.c | 36 +++
drivers/gpu/drm/drm_bridge_connector.c | 107 ++++++--
drivers/gpu/drm/drm_debugfs.c | 2 +
drivers/gpu/drm/msm/Kconfig | 2 +
drivers/gpu/drm/msm/hdmi/hdmi.c | 47 +---
drivers/gpu/drm/msm/hdmi/hdmi.h | 18 +-
drivers/gpu/drm/msm/hdmi/hdmi_audio.c | 74 ++----
drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 310 +++++++++++++++++++-----
drivers/gpu/drm/msm/registers/display/hdmi.xml | 2 +-
include/drm/display/drm_hdmi_state_helper.h | 1 +
include/drm/drm_bridge.h | 81 +++++++
11 files changed, 496 insertions(+), 184 deletions(-)
---
base-commit: 222d50ef3700aefb694e55a7a1f03d3fe2cb67f9
change-id: 20240307-bridge-hdmi-connector-7e3754e661d0
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
More information about the dri-devel
mailing list