[PATCH] drm/i915/gt/uc: Evaluate GuC priority within locks

Daniele Ceraolo Spurio daniele.ceraolospurio at intel.com
Fri Jun 7 18:19:04 UTC 2024



On 6/5/2024 5:17 PM, Andi Shyti wrote:
> The ce->guc_state.lock was made to protect guc_prio, which
> indicates the GuC priority level.
>
> But at the begnning of the function we perform some sanity check
> of guc_prio outside its protected section. Move them within the
> locked region.
>
> Use this occasion to expand the if statement to make it clearer.
>
> Fixes: ee242ca704d3 ("drm/i915/guc: Implement GuC priority management")
> Signed-off-by: Andi Shyti <andi.shyti at linux.intel.com>
> Cc: Matthew Brost <matthew.brost at intel.com>
> Cc: <stable at vger.kernel.org> # v5.15+
> ---
>   drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 15 +++++++++++----
>   1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
> index 0eaa1064242c..1181043bc5e9 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
> @@ -4267,13 +4267,18 @@ static void guc_bump_inflight_request_prio(struct i915_request *rq,
>   	u8 new_guc_prio = map_i915_prio_to_guc_prio(prio);
>   
>   	/* Short circuit function */
> -	if (prio < I915_PRIORITY_NORMAL ||
> -	    rq->guc_prio == GUC_PRIO_FINI ||
> -	    (rq->guc_prio != GUC_PRIO_INIT &&
> -	     !new_guc_prio_higher(rq->guc_prio, new_guc_prio)))
> +	if (prio < I915_PRIORITY_NORMAL)
>   		return;
>   

My understanding was that those checks are purposely done outside of the 
lock to avoid taking it when not needed and that the early exit is not 
racy. In particular:

- GUC_PRIO_FINI is the end state for the priority, so if we're there 
that's not changing anymore and therefore the lock is not required.

- the priority only goes up with the bumping, so if 
new_guc_prio_higher() is false that's not going to be changed by a 
different thread running at the same time and increasing the priority 
even more.

I think there is still a possible race is if new_guc_prio_higher() is 
true when we check it outside the lock but then changes before we 
execute the protected chunk inside, so a fix would still be required for 
that.

All this said, I don't really have anything against moving the whole 
thing inside the lock since this isn't on a critical path, just wanted 
to point out that it's not all strictly required.

One nit on the code below.

>   	spin_lock(&ce->guc_state.lock);
> +
> +	if (rq->guc_prio == GUC_PRIO_FINI)
> +		goto exit;
> +
> +	if (rq->guc_prio != GUC_PRIO_INIT &&
> +	    !new_guc_prio_higher(rq->guc_prio, new_guc_prio))
> +		goto exit;
> +
>   	if (rq->guc_prio != GUC_PRIO_FINI) {

You're now checking for rq->guc_prio == GUC_PRIO_FINI inside the lock, 
so no need to check it again here as it can't have changed.

Daniele

>   		if (rq->guc_prio != GUC_PRIO_INIT)
>   			sub_context_inflight_prio(ce, rq->guc_prio);
> @@ -4281,6 +4286,8 @@ static void guc_bump_inflight_request_prio(struct i915_request *rq,
>   		add_context_inflight_prio(ce, rq->guc_prio);
>   		update_context_prio(ce);
>   	}
> +
> +exit:
>   	spin_unlock(&ce->guc_state.lock);
>   }
>   



More information about the dri-devel mailing list