[PATCH v8 08/13] PCI: Move pinned status bit to struct pci_dev
Philipp Stanner
pstanner at redhat.com
Mon Jun 10 10:19:58 UTC 2024
On Mon, 2024-06-10 at 11:31 +0200, Philipp Stanner wrote:
> The bit describing whether the PCI device is currently pinned is stored
> in struct pci_devres. To clean up and simplify the PCI devres API, it's
> better if this information is stored in struct pci_dev.
>
> This will later permit simplifying pcim_enable_device().
>
> Move the 'pinned' boolean bit to struct pci_dev.
>
> Restructure bits in struct pci_dev so the pm / pme fields are next to
> each other.
>
> Signed-off-by: Philipp Stanner <pstanner at redhat.com>
> ---
> drivers/pci/devres.c | 14 ++++----------
> drivers/pci/pci.h | 1 -
> include/linux/pci.h | 4 +++-
> 3 files changed, 7 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pci/devres.c b/drivers/pci/devres.c
> index 9d25940ce260..2696baef5c2c 100644
> --- a/drivers/pci/devres.c
> +++ b/drivers/pci/devres.c
> @@ -403,7 +403,7 @@ static void pcim_release(struct device *gendev, void *res)
> if (this->restore_intx)
> pci_intx(dev, this->orig_intx);
>
> - if (pci_is_enabled(dev) && !this->pinned)
> + if (pci_is_enabled(dev) && !dev->pinned)
> pci_disable_device(dev);
> }
>
> @@ -459,18 +459,12 @@ EXPORT_SYMBOL(pcim_enable_device);
> * pcim_pin_device - Pin managed PCI device
> * @pdev: PCI device to pin
> *
> - * Pin managed PCI device @pdev. Pinned device won't be disabled on
> - * driver detach. @pdev must have been enabled with
> - * pcim_enable_device().
> + * Pin managed PCI device @pdev. Pinned device won't be disabled on driver
> + * detach. @pdev must have been enabled with pcim_enable_device().
> */
> void pcim_pin_device(struct pci_dev *pdev)
> {
> - struct pci_devres *dr;
> -
> - dr = find_pci_dr(pdev);
> - WARN_ON(!dr || !pci_is_enabled(pdev));
> - if (dr)
> - dr->pinned = 1;
> + pdev->pinned = true;
> }
> EXPORT_SYMBOL(pcim_pin_device);
>
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index d7f00b43b098..6e02ba1b5947 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -821,7 +821,6 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
> * then remove them from here.
> */
> struct pci_devres {
> - unsigned int pinned:1;
> unsigned int orig_intx:1;
> unsigned int restore_intx:1;
> unsigned int mwi:1;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index fb004fd4e889..cc9247f78158 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -367,10 +367,12 @@ struct pci_dev {
> this is D0-D3, D0 being fully
> functional, and D3 being off. */
> u8 pm_cap; /* PM capability offset */
> - unsigned int imm_ready:1; /* Supports Immediate Readiness */
> unsigned int pme_support:5; /* Bitmask of states from which PME#
> can be generated */
> unsigned int pme_poll:1; /* Poll device's PME status bit */
> + unsigned int enabled:1; /* Whether this dev is enabled */
Ah crap, here it survived for some reason...
Should just be dead code and not have any effect. In any case, we
should remove it.
@Bjorn: Feel free to remove it yourself. Otherwise I could provide a v9
together with potential further feedback taken into account in a few
days
Thx,
P.
> + unsigned int pinned:1; /* Whether this dev is pinned */
> + unsigned int imm_ready:1; /* Supports Immediate Readiness */
> unsigned int d1_support:1; /* Low power state D1 is supported */
> unsigned int d2_support:1; /* Low power state D2 is supported */
> unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
More information about the dri-devel
mailing list