[PATCH 00/14] improve Analogix DP AUX channel handling

[Heiko Stübner]

Am Freitag, 3. Mai 2024, 17:11:15 CEST schrieb Lucas Stach:
> Currently the AUX channel support in the Analogix DP driver is severely
> limited as the AUX block of the bridge is only initialized when the video
> link is to be enabled. This is okay for the purposes of link training,
> but does not allow to detect displays by probing for EDID. This series
> reworks the driver to allow AUX transactions before the video link is
> active.
> 
> As this requires to rework some of the controller initialization and
> also handling of both internal and external clocks, the series includes
> quite a few changes to add better runtime PM handling.
> 
> Lucas Stach (14):
>   drm/bridge: analogix_dp: remove unused platform power_on_end callback
>   drm/rockchip: analogix_dp: add runtime PM handling
>   drm/bridge: analogix_dp: register AUX bus after enabling runtime PM
>   drm/bridge: analogix_dp: handle clock via runtime PM
>   drm/bridge: analogix_dp: remove unused analogix_dp_remove
>   drm/bridge: analogix_dp: remove clk handling from
>     analogix_dp_set_bridge
>   drm/bridge: analogix_dp: move platform and PHY power handling into
>     runtime PM
>   drm/bridge: analogix_dp: move basic controller init into runtime PM
>   drm/bridge: analogix_dp: remove PLL lock check from
>     analogix_dp_config_video
>   drm/bridge: analogix_dp: move macro reset after link bandwidth setting
>   drm/bridge: analogix_dp: don't wait for PLL lock too early
>   drm/bridge: analogix_dp: simplify and correct PLL lock checks
>   drm/bridge: analogix_dp: only read AUX status when an error occured
>   drm/bridge: analogix_dp: handle AUX transfer timeouts

my knowledge of Analgix-dp internals is limited, but at least both
rk3288-veyron and rk3399 gru still had working displays with this series
applied and both device classes using the analogix-dp for their main
display.

So on rk3288-veyron and rk3399-gru
Tested-by: Heiko Stuebner <heiko at sntech.de>