[PATCH 8/8] drm: bridge: dw_hdmi: Use display_info is_hdmi and has_audio

Jonas Karlman jonas at kwiboo.se
Tue Jun 11 15:51:00 UTC 2024


drm_edid_connector_update() is being called from bridge connector ops
and from detect and get_modes ops for dw-hdmi connector.

Change to use is_hdmi and has_audio from display_info directly instead
of keeping our own state in sink_is_hdmi and sink_has_audio.

Also remove the old and unused edid struct member and related define.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 32 ++++-------------------
 1 file changed, 5 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a9c39584d31b..e162c2786178 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -43,8 +43,6 @@
 #define DDC_CI_ADDR		0x37
 #define DDC_SEGMENT_ADDR	0x30
 
-#define HDMI_EDID_LEN		512
-
 /* DW-HDMI Controller >= 0x200a are at least compliant with SCDC version 1 */
 #define SCDC_MIN_SOURCE_VERSION	0x1
 
@@ -148,8 +146,6 @@ struct dw_hdmi {
 
 	int vic;
 
-	u8 edid[HDMI_EDID_LEN];
-
 	struct {
 		const struct dw_hdmi_phy_ops *ops;
 		const char *name;
@@ -159,8 +155,6 @@ struct dw_hdmi {
 
 	struct i2c_adapter *ddc;
 	void __iomem *regs;
-	bool sink_is_hdmi;
-	bool sink_has_audio;
 
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *default_state;
@@ -2041,7 +2035,7 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
 		HDMI_FC_INVIDCONF_IN_I_P_INTERLACED :
 		HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE;
 
-	inv_val |= hdmi->sink_is_hdmi ?
+	inv_val |= display->is_hdmi ?
 		HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE :
 		HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE;
 
@@ -2275,7 +2269,7 @@ static int dw_hdmi_poweron(struct dw_hdmi *hdmi,
 	if (hdmi->hdmi_data.enc_out_bus_format == MEDIA_BUS_FMT_FIXED)
 		hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 
-	hdmi->hdmi_data.rgb_limited_range = hdmi->sink_is_hdmi &&
+	hdmi->hdmi_data.rgb_limited_range = display->is_hdmi &&
 		drm_default_rgb_quant_range(mode) ==
 		HDMI_QUANTIZATION_RANGE_LIMITED;
 
@@ -2295,7 +2289,7 @@ static int dw_hdmi_poweron(struct dw_hdmi *hdmi,
 	/* HDMI Initialization Step B.3 */
 	dw_hdmi_enable_video_path(hdmi);
 
-	if (hdmi->sink_has_audio) {
+	if (display->has_audio) {
 		dev_dbg(hdmi->dev, "sink has audio support\n");
 
 		/* HDMI Initialization Step E - Configure audio */
@@ -2304,7 +2298,7 @@ static int dw_hdmi_poweron(struct dw_hdmi *hdmi,
 	}
 
 	/* not for DVI mode */
-	if (hdmi->sink_is_hdmi) {
+	if (display->is_hdmi) {
 		dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__);
 
 		/* HDMI Initialization Step F - Configure AVI InfoFrame */
@@ -2418,29 +2412,13 @@ static const struct drm_edid *dw_hdmi_edid_read(struct dw_hdmi *hdmi,
 						struct drm_connector *connector)
 {
 	const struct drm_edid *drm_edid;
-	const struct edid *edid;
 
 	if (!hdmi->ddc)
 		return NULL;
 
 	drm_edid = drm_edid_read_ddc(connector, hdmi->ddc);
-	if (!drm_edid) {
+	if (!drm_edid)
 		dev_dbg(hdmi->dev, "failed to get edid\n");
-		return NULL;
-	}
-
-	/*
-	 * FIXME: This should use connector->display_info.is_hdmi and
-	 * connector->display_info.has_audio from a path that has read the EDID
-	 * and called drm_edid_connector_update().
-	 */
-	edid = drm_edid_raw(drm_edid);
-
-	dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
-		edid->width_cm, edid->height_cm);
-
-	hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
-	hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
 
 	return drm_edid;
 }
-- 
2.45.2



More information about the dri-devel mailing list