[PATCH RFC 1/5] drm/bridge: lt9611: use HDMI Connector helper to set InfoFrames
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Jun 15 17:53:30 UTC 2024
Use new HDMI Connector helpers in the Lontium LT9611 bridge driver.
Program InfoFrames using the helper's callbacks. Also use TMDS char rate
validation callback to filter out modes, instead of hardcoding 4k at 30.
The Audio InfoFrame isn't yet handled by these helpers, it requires
additional drm_bridge interface changes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/bridge/Kconfig | 2 +
drivers/gpu/drm/bridge/lontium-lt9611.c | 173 ++++++++++++++++++++++----------
2 files changed, 120 insertions(+), 55 deletions(-)
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index c621be1a99a8..b27b8a072101 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -140,6 +140,8 @@ config DRM_LONTIUM_LT9611
select DRM_PANEL_BRIDGE
select DRM_KMS_HELPER
select DRM_MIPI_DSI
+ select DRM_DISPLAY_HELPER
+ select DRM_DISPLAY_HDMI_STATE_HELPER
select REGMAP_I2C
help
Driver for Lontium LT9611 DSI to HDMI bridge
diff --git a/drivers/gpu/drm/bridge/lontium-lt9611.c b/drivers/gpu/drm/bridge/lontium-lt9611.c
index 73983f9b50cb..1b31fdebe164 100644
--- a/drivers/gpu/drm/bridge/lontium-lt9611.c
+++ b/drivers/gpu/drm/bridge/lontium-lt9611.c
@@ -23,6 +23,8 @@
#include <drm/drm_of.h>
#include <drm/drm_print.h>
#include <drm/drm_probe_helper.h>
+#include <drm/display/drm_hdmi_helper.h>
+#include <drm/display/drm_hdmi_state_helper.h>
#define EDID_SEG_SIZE 256
#define EDID_LEN 32
@@ -333,49 +335,6 @@ static int lt9611_video_check(struct lt9611 *lt9611)
return temp;
}
-static void lt9611_hdmi_set_infoframes(struct lt9611 *lt9611,
- struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- union hdmi_infoframe infoframe;
- ssize_t len;
- u8 iframes = 0x0a; /* UD1 infoframe */
- u8 buf[32];
- int ret;
- int i;
-
- ret = drm_hdmi_avi_infoframe_from_display_mode(&infoframe.avi,
- connector,
- mode);
- if (ret < 0)
- goto out;
-
- len = hdmi_infoframe_pack(&infoframe, buf, sizeof(buf));
- if (len < 0)
- goto out;
-
- for (i = 0; i < len; i++)
- regmap_write(lt9611->regmap, 0x8440 + i, buf[i]);
-
- ret = drm_hdmi_vendor_infoframe_from_display_mode(&infoframe.vendor.hdmi,
- connector,
- mode);
- if (ret < 0)
- goto out;
-
- len = hdmi_infoframe_pack(&infoframe, buf, sizeof(buf));
- if (len < 0)
- goto out;
-
- for (i = 0; i < len; i++)
- regmap_write(lt9611->regmap, 0x8474 + i, buf[i]);
-
- iframes |= 0x20;
-
-out:
- regmap_write(lt9611->regmap, 0x843d, iframes); /* UD1 infoframe */
-}
-
static void lt9611_hdmi_tx_digital(struct lt9611 *lt9611, bool is_hdmi)
{
if (is_hdmi)
@@ -719,7 +678,7 @@ lt9611_bridge_atomic_enable(struct drm_bridge *bridge,
}
lt9611_mipi_input_analog(lt9611);
- lt9611_hdmi_set_infoframes(lt9611, connector, mode);
+ drm_atomic_helper_connector_hdmi_update_infoframes(connector, state);
lt9611_hdmi_tx_digital(lt9611, connector->display_info.is_hdmi);
lt9611_hdmi_tx_phy(lt9611);
@@ -798,22 +757,25 @@ static enum drm_mode_status lt9611_bridge_mode_valid(struct drm_bridge *bridge,
const struct drm_display_mode *mode)
{
struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+ unsigned long long rate;
if (mode->hdisplay > 3840)
return MODE_BAD_HVALUE;
- if (mode->vdisplay > 2160)
- return MODE_BAD_VVALUE;
-
- if (mode->hdisplay == 3840 &&
- mode->vdisplay == 2160 &&
- drm_mode_vrefresh(mode) > 30)
- return MODE_CLOCK_HIGH;
-
if (mode->hdisplay > 2000 && !lt9611->dsi1_node)
return MODE_PANEL;
- else
- return MODE_OK;
+
+ rate = drm_hdmi_compute_mode_clock(mode, 8, HDMI_COLORSPACE_RGB);
+ return bridge->funcs->hdmi_tmds_char_rate_valid(bridge, mode, rate);
+}
+
+static int lt9611_bridge_atomic_check(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ return drm_atomic_helper_connector_hdmi_check(conn_state->connector,
+ conn_state->state);
}
static void lt9611_bridge_atomic_pre_enable(struct drm_bridge *bridge,
@@ -887,6 +849,99 @@ lt9611_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
return input_fmts;
}
+/*
+ * Other working frames:
+ * - 0x01, 0x84df
+ * - 0x04, 0x84c0
+ */
+#define LT9611_INFOFRAME_AUDIO 0x02
+#define LT9611_INFOFRAME_AVI 0x08
+#define LT9611_INFOFRAME_SPD 0x10
+#define LT9611_INFOFRAME_VENDOR 0x20
+
+static int lt9611_hdmi_clear_infoframe(struct drm_bridge *bridge,
+ enum hdmi_infoframe_type type)
+{
+ struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+ unsigned int mask;
+
+ switch (type) {
+ case HDMI_INFOFRAME_TYPE_AVI:
+ mask = LT9611_INFOFRAME_AVI;
+ break;
+
+ case HDMI_INFOFRAME_TYPE_SPD:
+ mask = LT9611_INFOFRAME_SPD;
+ break;
+
+ case HDMI_INFOFRAME_TYPE_VENDOR:
+ mask = LT9611_INFOFRAME_VENDOR;
+ break;
+
+ default:
+ drm_dbg_driver(lt9611->bridge.dev, "Unsupported HDMI InfoFrame %x\n", type);
+ mask = 0;
+ break;
+ }
+
+ if (mask)
+ regmap_update_bits(lt9611->regmap, 0x843d, mask, 0);
+
+ return 0;
+}
+
+static int lt9611_hdmi_write_infoframe(struct drm_bridge *bridge,
+ enum hdmi_infoframe_type type,
+ const u8 *buffer, size_t len)
+{
+ struct lt9611 *lt9611 = bridge_to_lt9611(bridge);
+ unsigned int mask, addr;
+ int i;
+
+ switch (type) {
+ case HDMI_INFOFRAME_TYPE_AVI:
+ mask = LT9611_INFOFRAME_AVI;
+ addr = 0x8440;
+ break;
+
+ case HDMI_INFOFRAME_TYPE_SPD:
+ mask = LT9611_INFOFRAME_SPD;
+ addr = 0x8493;
+ break;
+
+ case HDMI_INFOFRAME_TYPE_VENDOR:
+ mask = LT9611_INFOFRAME_VENDOR;
+ addr = 0x8474;
+ break;
+
+ default:
+ drm_dbg_driver(lt9611->bridge.dev, "Unsupported HDMI InfoFrame %x\n", type);
+ mask = 0;
+ break;
+ }
+
+ if (mask) {
+ for (i = 0; i < len; i++)
+ regmap_write(lt9611->regmap, addr + i, buffer[i]);
+
+ regmap_update_bits(lt9611->regmap, 0x843d, mask, mask);
+ }
+
+ return 0;
+}
+
+static enum drm_mode_status
+lt9611_hdmi_tmds_char_rate_valid(const struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ unsigned long long tmds_rate)
+{
+ /* 297 MHz for 4k at 30 mode */
+ if (tmds_rate > 297000000)
+ return MODE_CLOCK_HIGH;
+
+ return MODE_OK;
+}
+
static const struct drm_bridge_funcs lt9611_bridge_funcs = {
.attach = lt9611_bridge_attach,
.mode_valid = lt9611_bridge_mode_valid,
@@ -894,6 +949,7 @@ static const struct drm_bridge_funcs lt9611_bridge_funcs = {
.edid_read = lt9611_bridge_edid_read,
.hpd_enable = lt9611_bridge_hpd_enable,
+ .atomic_check = lt9611_bridge_atomic_check,
.atomic_pre_enable = lt9611_bridge_atomic_pre_enable,
.atomic_enable = lt9611_bridge_atomic_enable,
.atomic_disable = lt9611_bridge_atomic_disable,
@@ -902,6 +958,10 @@ static const struct drm_bridge_funcs lt9611_bridge_funcs = {
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
.atomic_get_input_bus_fmts = lt9611_atomic_get_input_bus_fmts,
+
+ .hdmi_tmds_char_rate_valid = lt9611_hdmi_tmds_char_rate_valid,
+ .hdmi_write_infoframe = lt9611_hdmi_write_infoframe,
+ .hdmi_clear_infoframe = lt9611_hdmi_clear_infoframe,
};
static int lt9611_parse_dt(struct device *dev,
@@ -1116,8 +1176,11 @@ static int lt9611_probe(struct i2c_client *client)
lt9611->bridge.funcs = <9611_bridge_funcs;
lt9611->bridge.of_node = client->dev.of_node;
lt9611->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID |
- DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_MODES;
+ DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_MODES |
+ DRM_BRIDGE_OP_HDMI;
lt9611->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
+ lt9611->bridge.vendor = "Lontium";
+ lt9611->bridge.product = "LT9611";
drm_bridge_add(<9611->bridge);
--
2.39.2
More information about the dri-devel
mailing list