[PATCH v2 0/2] drm/bridge: tc358767: Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR case
Jan Kiszka
jan.kiszka at siemens.com
Mon Jun 17 05:40:32 UTC 2024
On 16.02.24 15:57, Marek Vasut wrote:
> On 2/16/24 10:10, Tomi Valkeinen wrote:
>> On 15/02/2024 11:03, Alexander Stein wrote:
>>> Hi everyone,
>>>
>>> Am Donnerstag, 15. Februar 2024, 09:53:54 CET schrieb Jan Kiszka:
>>>> On 11.12.23 09:07, Aradhya Bhatia wrote:
>>>>> On 06/12/23 17:41, Tomi Valkeinen wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 08/11/2023 14:45, Alexander Stein wrote:
>>>>>>> Hi Tomi,
>>>>>>>
>>>>>>> Am Mittwoch, 8. November 2023, 12:27:21 CET schrieb Tomi Valkeinen:
>>>>>>>> These two patches are needed to make tc358767 work in the
>>>>>>>> DRM_BRIDGE_ATTACH_NO_CONNECTOR case, at least when using a DP
>>>>>>>> connector.
>>>>>>>>
>>>>>>>> I have tested this with TI AM654 EVM with a tc358767 add-on card
>>>>>>>> connected to a DP monitor.
>>>>>>>
>>>>>>> Just a question regarding the usage of this DSI-DP bridge.
>>>>>>> What is the state of the DSI lanes after the DSI host has been
>>>>>>> initialized,
>>>>>>> but before calling atomic_pre_enable? AFAIK this bridge requires
>>>>>>> LP-11
>>>>>>> on DSI
>>>>>>> at any time for accessing the AUX channel.
>>>>>
>>>>> + Marek
>>>>>
>>>>> Marek, Alexander,
>>>>>
>>>>> A quick grep tells me that you have added devicetree for tc358767
>>>>> in DSI
>>>>> to (e)DP mode on other platforms. Could you please test these patches
>>>>> and report if you find any issue?
>>>
>>> Sorry, I can't provide any feedback here. I've yet to setup the DSI-DP
>>> correctly.
>>
>> Ok. Does anyone have a worry that these patches make the situation
>> worse for the DSI case than it was before? Afaics, if the DSI lanes
>> are not set up early enough by the DSI host, the driver would break
>> with and without these patches.
>>
>> These do fix the driver for DRM_BRIDGE_ATTACH_NO_CONNECTOR and DPI, so
>> I'd like to merge these unless these cause a regression with the DSI
>> case.
>
> 1/2 looks good to me, go ahead and apply .
My local patches still apply on top of 6.10-rc4, so I don't think this
ever happened. What's still holding up this long-pending fix (at least
for our devices)?
Jan
--
Siemens AG, Technology
Linux Expert Center
More information about the dri-devel
mailing list