[PATCH v2] drm: xlnx: zynqmp_dpsub: Enable plane in atomic update

[Tomi Valkeinen]

Hi,

On 24/05/2024 02:49, Anatoliy Klymenko wrote:
> Unconditionally enable the DPSUB layer in the corresponding atomic plane
> update callback. Setting the new display mode may require disabling and
> re-enabling the CRTC. This effectively resets DPSUB to the default state
> with all layers disabled. The original implementation of the plane atomic
> update enables the corresponding DPSUB layer only if the framebuffer
> format has changed. This would leave the layer disabled after switching to
> a different display mode with the same framebuffer format.
> 
> Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko at amd.com>
> ---
> Changes in v2:
> - Added comment around DPSUB layer enablement explaining why it should be
>    done unconditionally.
> - Link to v1: https://lore.kernel.org/r/20240520-dp-layer-enable-v1-1-c9b481209115@amd.com
> ---
>   drivers/gpu/drm/xlnx/zynqmp_kms.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> index 43bf416b33d5..0b57ab5451a9 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> @@ -120,9 +120,13 @@ static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane,
>   		zynqmp_disp_blend_set_global_alpha(dpsub->disp, true,
>   						   plane->state->alpha >> 8);
>   
> -	/* Enable or re-enable the plane if the format has changed. */
> -	if (format_changed)
> -		zynqmp_disp_layer_enable(layer);
> +	/*
> +	 * Unconditionally enable the layer, as it may have been disabled
> +	 * previously either explicitly to reconfigure layer format, or
> +	 * implicitly after DPSUB reset during display mode change. DRM
> +	 * framework calls this callback for enabled planes only.
> +	 */
> +	zynqmp_disp_layer_enable(layer);
>   }
>   
>   static const struct drm_plane_helper_funcs zynqmp_dpsub_plane_helper_funcs = {
> 
> ---
> base-commit: 673087d8b023faf34b84e8faf63bbeea3da87bab
> change-id: 20240520-dp-layer-enable-7b561af29ca8
> 
> Best regards,

Thanks, I have pushed this to drm-misc-next.

  Tomi