[PATCH] drm/tidss: Add drm_panic support

[Jocelyn Falempe]

On 15/06/2024 10:53, Javier Martinez Canillas wrote:
> Add support for the drm_panic module, which displays a pretty user
> friendly message on the screen when a Linux kernel panic occurs.

Thanks for enabling drm panic on another hardware.
It looks good to me.

Reviewed-by: Jocelyn Falempe <jfalempe at redhat.com>


> 
> Signed-off-by: Javier Martinez Canillas <javierm at redhat.com>
> ---
> Tested on an AM625 BeaglePlay board by triggering a panic using the
> `echo c > /proc/sysrq-trigger` command.
> 
>   drivers/gpu/drm/tidss/tidss_plane.c | 14 +++++++++++++-
>   1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/tidss/tidss_plane.c b/drivers/gpu/drm/tidss/tidss_plane.c
> index 68fed531f6a7..a5d86822c9e3 100644
> --- a/drivers/gpu/drm/tidss/tidss_plane.c
> +++ b/drivers/gpu/drm/tidss/tidss_plane.c
> @@ -8,6 +8,7 @@
>   #include <drm/drm_atomic_helper.h>
>   #include <drm/drm_blend.h>
>   #include <drm/drm_crtc.h>
> +#include <drm/drm_fb_dma_helper.h>
>   #include <drm/drm_fourcc.h>
>   #include <drm/drm_framebuffer.h>
>   #include <drm/drm_gem_atomic_helper.h>
> @@ -166,6 +167,14 @@ static const struct drm_plane_helper_funcs tidss_plane_helper_funcs = {
>   	.atomic_disable = tidss_plane_atomic_disable,
>   };
>   
> +static const struct drm_plane_helper_funcs tidss_primary_plane_helper_funcs = {
> +	.atomic_check = tidss_plane_atomic_check,
> +	.atomic_update = tidss_plane_atomic_update,
> +	.atomic_enable = tidss_plane_atomic_enable,
> +	.atomic_disable = tidss_plane_atomic_disable,
> +	.get_scanout_buffer = drm_fb_dma_get_scanout_buffer,
> +};
> +
>   static const struct drm_plane_funcs tidss_plane_funcs = {
>   	.update_plane = drm_atomic_helper_update_plane,
>   	.disable_plane = drm_atomic_helper_disable_plane,
> @@ -211,7 +220,10 @@ struct tidss_plane *tidss_plane_create(struct tidss_device *tidss,
>   	if (ret < 0)
>   		goto err;
>   
> -	drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
> +	if (type == DRM_PLANE_TYPE_PRIMARY)
> +		drm_plane_helper_add(&tplane->plane, &tidss_primary_plane_helper_funcs);
> +	else
> +		drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
>   
>   	drm_plane_create_zpos_property(&tplane->plane, tidss->num_planes, 0,
>   				       num_planes - 1);