[PATCH] media: videobuf2: sync caches for dmabuf memory

TaoJiang tao.jiang_2 at nxp.com
Tue Jun 18 07:30:04 UTC 2024


From: Ming Qian <ming.qian at nxp.com>

When the memory type is VB2_MEMORY_DMABUF, the v4l2 device can't know
whether the dma buffer is coherent or synchronized.

The videobuf2-core will skip cache syncs as it think the DMA exporter
should take care of cache syncs

But in fact it's likely that the client doesn't
synchronize the dma buf before qbuf() or after dqbuf(). and it's
difficult to find this type of error directly.

I think it's helpful that videobuf2-core can call
dma_buf_end_cpu_access() and dma_buf_begin_cpu_access() to handle the
cache syncs.

Signed-off-by: Ming Qian <ming.qian at nxp.com>
Signed-off-by: TaoJiang <tao.jiang_2 at nxp.com>
---
 .../media/common/videobuf2/videobuf2-core.c   | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
index 358f1fe42975..4734ff9cf3ce 100644
--- a/drivers/media/common/videobuf2/videobuf2-core.c
+++ b/drivers/media/common/videobuf2/videobuf2-core.c
@@ -340,6 +340,17 @@ static void __vb2_buf_mem_prepare(struct vb2_buffer *vb)
 	vb->synced = 1;
 	for (plane = 0; plane < vb->num_planes; ++plane)
 		call_void_memop(vb, prepare, vb->planes[plane].mem_priv);
+
+	if (vb->memory != VB2_MEMORY_DMABUF)
+		return;
+	for (plane = 0; plane < vb->num_planes; ++plane) {
+		struct dma_buf *dbuf = vb->planes[plane].dbuf;
+
+		if (!dbuf)
+			continue;
+
+		dma_buf_end_cpu_access(dbuf, vb->vb2_queue->dma_dir);
+	}
 }
 
 /*
@@ -356,6 +367,17 @@ static void __vb2_buf_mem_finish(struct vb2_buffer *vb)
 	vb->synced = 0;
 	for (plane = 0; plane < vb->num_planes; ++plane)
 		call_void_memop(vb, finish, vb->planes[plane].mem_priv);
+
+	if (vb->memory != VB2_MEMORY_DMABUF)
+		return;
+	for (plane = 0; plane < vb->num_planes; ++plane) {
+		struct dma_buf *dbuf = vb->planes[plane].dbuf;
+
+		if (!dbuf)
+			continue;
+
+		dma_buf_begin_cpu_access(dbuf, vb->vb2_queue->dma_dir);
+	}
 }
 
 /*
-- 
2.43.0-rc1



More information about the dri-devel mailing list