[PATCH v3 17/23] mfd: add s2dos series core driver
Dzmitry Sankouski
dsankouski at gmail.com
Tue Jun 18 13:59:51 UTC 2024
S2DOS05 is a panel/touchscreen PMIC, often found in
Samsung phones. We define 2 sub-devices for which drivers will
be added in subsequent patches.
Signed-off-by: Dzmitry Sankouski <dsankouski at gmail.com>
---
MAINTAINERS | 1 +
drivers/mfd/Kconfig | 13 +++
drivers/mfd/Makefile | 2 +-
drivers/mfd/s2dos-core.c | 141 +++++++++++++++++++++++++++++++++
include/linux/mfd/samsung/s2dos-core.h | 21 +++++
include/linux/mfd/samsung/s2dos05.h | 115 +++++++++++++++++++++++++++
6 files changed, 292 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index f3c245d432d9..b53462684a30 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19908,6 +19908,7 @@ F: Documentation/devicetree/bindings/regulator/samsung,s2dos*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
F: drivers/clk/clk-s2mps11.c
+F: drivers/mfd/s2dos*.c
F: drivers/mfd/sec*.c
F: drivers/regulator/s2m*.c
F: drivers/regulator/s5m*.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index c4eb8ff2dcad..517d8778d7a8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1278,6 +1278,19 @@ config MFD_RN5T618
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_S2DOS_CORE
+ tristate "Samsung Electronics PMIC Series Support"
+ depends on I2C=y
+ depends on OF
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Support for the Samsung Electronics PMIC devices
+ usually used to power displays.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_SEC_CORE
tristate "Samsung Electronics PMIC Series Support"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index bf65cc36d59c..37c51aab0205 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -228,7 +228,7 @@ obj-$(CONFIG_MFD_RK8XX_I2C) += rk8xx-i2c.o
obj-$(CONFIG_MFD_RK8XX_SPI) += rk8xx-spi.o
obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
-obj-$(CONFIG_MFD_S2DOS05) += s2dos05.o
+obj-$(CONFIG_MFD_S2DOS_CORE) += s2dos-core.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
obj-$(CONFIG_MFD_VEXPRESS_SYSREG) += vexpress-sysreg.o
diff --git a/drivers/mfd/s2dos-core.c b/drivers/mfd/s2dos-core.c
new file mode 100644
index 000000000000..a04363b15a2a
--- /dev/null
+++ b/drivers/mfd/s2dos-core.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * s2dos05.c - mfd core driver for the s2dos05 chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (C) 2024 Dzmitry Sankouski <dsankouski at gmail.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/samsung/s2dos-core.h>
+#include <linux/mfd/samsung/s2dos05.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/debugfs.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+
+static struct dentry *debugfs_file;
+
+static int s2dos05_debugfs_show(struct seq_file *s, void *data)
+{
+ struct s2dos_core *s2dos05 = s->private;
+ struct regmap *regmap = s2dos05->regmap;
+ unsigned int i, reg, reg_data, pmic_id;
+ int regs[] = {
+ S2DOS05_REG_DEV_ID,
+ S2DOS05_REG_TOPSYS_STAT,
+ S2DOS05_REG_STAT,
+ S2DOS05_REG_EN,
+ S2DOS05_REG_LDO1_CFG,
+ S2DOS05_REG_LDO2_CFG,
+ S2DOS05_REG_LDO3_CFG,
+ S2DOS05_REG_LDO4_CFG,
+ S2DOS05_REG_BUCK_CFG,
+ S2DOS05_REG_BUCK_VOUT,
+ S2DOS05_REG_IRQ_MASK,
+ S2DOS05_REG_SSD_TSD,
+ S2DOS05_REG_OCL,
+ S2DOS05_REG_IRQ
+ };
+ regmap_read(regmap, S2DOS05_REG_DEV_ID, &pmic_id);
+ seq_printf(s, "S2DOS05, id: %d\n", pmic_id);
+ seq_puts(s, "===================\n");
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ reg = regs[i];
+ regmap_read(regmap, reg, ®_data);
+ seq_printf(s, "0x%02x:\t0x%02x\n", reg, reg_data);
+ }
+
+ seq_puts(s, "\n");
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(s2dos05_debugfs);
+
+static const struct regmap_config s2dos05_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = S2DOS05_REG_IRQ,
+};
+
+static struct mfd_cell s2dos05_devs[] = {
+ { .name = "s2dos05-fg" },
+ {
+ .name = "s2dos05-regulator",
+ .of_compatible = "samsung,s2dos05-regulator",
+ },
+};
+
+
+static int s2dos05_i2c_probe(struct i2c_client *i2c)
+{
+ struct s2dos_core *s2dos05;
+ struct regmap *regmap;
+ struct device *dev = &i2c->dev;
+
+ unsigned int reg_data;
+ int ret = 0;
+
+ s2dos05 = kzalloc(sizeof(struct s2dos_core), GFP_KERNEL);
+ if (!s2dos05)
+ return -ENOMEM;
+
+ regmap = devm_regmap_init_i2c(i2c, &s2dos05_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Unable to initialise I2C Regmap\n");
+ return PTR_ERR(regmap);
+ }
+ s2dos05->regmap = regmap;
+
+ if (regmap_read(regmap, S2DOS05_REG_DEV_ID, ®_data) < 0) {
+ dev_err(dev,
+ "device not found on this channel (this is not an error)\n");
+ ret = -ENODEV;
+ } else {
+ dev_info(dev, "%s device found with id: .0x%x\n",
+ __func__, reg_data);
+ }
+
+ i2c_set_clientdata(i2c, s2dos05);
+
+ debugfs_file = debugfs_create_file("s2dos05-regs",
+ 0664, NULL, (void *)s2dos05,
+ &s2dos05_debugfs_fops);
+ if (!debugfs_file)
+ dev_err(dev, "Failed to create debugfs file\n");
+
+ return mfd_add_devices(dev, -1, s2dos05_devs,
+ ARRAY_SIZE(s2dos05_devs), NULL, 0, NULL);
+}
+
+static const struct of_device_id s2dos05_i2c_dt_ids[] = {
+ { .compatible = "samsung,s2dos05-pmic" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, s2dos05_i2c_dt_ids);
+
+static struct i2c_driver s2dos05_i2c_driver = {
+ .driver = {
+ .name = "s2dos-core",
+ .owner = THIS_MODULE,
+ .of_match_table = s2dos05_i2c_dt_ids,
+ },
+ .probe = s2dos05_i2c_probe,
+};
+
+module_i2c_driver(s2dos05_i2c_driver);
+
+MODULE_DESCRIPTION("s2dos core driver");
+MODULE_AUTHOR("Dzmitry Sankouski <dsankouski at gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/samsung/s2dos-core.h b/include/linux/mfd/samsung/s2dos-core.h
new file mode 100644
index 000000000000..7e84b387063c
--- /dev/null
+++ b/include/linux/mfd/samsung/s2dos-core.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * s2dos-core.h
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ * Copyright (C) 2024 Dzmitry Sankouski <dsankouski at gmail.com>
+ *
+ */
+
+#ifndef __LINUX_MFD_S2DOS_CORE_H
+#define __LINUX_MFD_S2DOS_CORE_H
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct s2dos_core {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+#endif /* __LINUX_MFD_S2DOS_CORE_H */
diff --git a/include/linux/mfd/samsung/s2dos05.h b/include/linux/mfd/samsung/s2dos05.h
new file mode 100644
index 000000000000..0317dbe56f10
--- /dev/null
+++ b/include/linux/mfd/samsung/s2dos05.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * s2dos05.h
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ */
+
+#ifndef __LINUX_MFD_S2DOS05_H
+#define __LINUX_MFD_S2DOS05_H
+
+/* S2DOS05 registers */
+/* Slave Addr : 0xC0 */
+enum s2dos05_reg {
+ S2DOS05_REG_DEV_ID,
+ S2DOS05_REG_TOPSYS_STAT,
+ S2DOS05_REG_STAT,
+ S2DOS05_REG_EN,
+ S2DOS05_REG_LDO1_CFG,
+ S2DOS05_REG_LDO2_CFG,
+ S2DOS05_REG_LDO3_CFG,
+ S2DOS05_REG_LDO4_CFG,
+ S2DOS05_REG_BUCK_CFG,
+ S2DOS05_REG_BUCK_VOUT,
+ S2DOS05_REG_IRQ_MASK = 0x0D,
+ S2DOS05_REG_SSD_TSD = 0x0E,
+ S2DOS05_REG_OCL = 0x10,
+ S2DOS05_REG_IRQ = 0x11
+};
+
+/* S2DOS05 regulator ids */
+enum s2dos05_regulators {
+ S2DOS05_LDO1,
+ S2DOS05_LDO2,
+ S2DOS05_LDO3,
+ S2DOS05_LDO4,
+ S2DOS05_BUCK1,
+ S2DOS05_REG_MAX,
+};
+
+#define S2DOS05_IRQ_PWRMT_MASK BIT(5)
+#define S2DOS05_IRQ_TSD_MASK BIT(4)
+#define S2DOS05_IRQ_SSD_MASK BIT(3)
+#define S2DOS05_IRQ_SCP_MASK BIT(2)
+#define S2DOS05_IRQ_UVLO_MASK BIT(1)
+#define S2DOS05_IRQ_OCD_MASK BIT(0)
+
+#define S2DOS05_BUCK_MIN1 506250
+#define S2DOS05_LDO_MIN1 1500000
+#define S2DOS05_LDO_MIN2 2700000
+#define S2DOS05_BUCK_STEP1 6250
+#define S2DOS05_LDO_STEP1 25000
+#define S2DOS05_LDO_VSEL_MASK 0x7F
+#define S2DOS05_LDO_FD_MASK BIT(7)
+#define S2DOS05_BUCK_VSEL_MASK 0xFF
+#define S2DOS05_BUCK_FD_MASK BIT(3)
+
+#define S2DOS05_ENABLE_MASK_L1 BIT(0)
+#define S2DOS05_ENABLE_MASK_L2 BIT(1)
+#define S2DOS05_ENABLE_MASK_L3 BIT(2)
+#define S2DOS05_ENABLE_MASK_L4 BIT(3)
+#define S2DOS05_ENABLE_MASK_B1 BIT(4)
+
+#define S2DOS05_RAMP_DELAY 12000
+
+#define S2DOS05_ENABLE_TIME_LDO 50
+#define S2DOS05_ENABLE_TIME_BUCK 350
+
+#define S2DOS05_ENABLE_SHIFT 0x06
+#define S2DOS05_LDO_N_VOLTAGES (S2DOS05_LDO_VSEL_MASK + 1)
+#define S2DOS05_BUCK_N_VOLTAGES (S2DOS05_BUCK_VSEL_MASK + 1)
+
+#define S2DOS05_PMIC_EN_SHIFT 6
+#define S2DOS05_REGULATOR_MAX (S2DOS05_REG_MAX)
+
+/* ----------power meter ----------*/
+#define S2DOS05_REG_PWRMT_CTRL1 0x0A
+#define S2DOS05_REG_PWRMT_CTRL2 0x0B
+#define S2DOS05_REG_PWRMT_DATA 0x0C
+#define S2DOS05_REG_IRQ_MASK 0x0D
+
+#define CHANNEL_ELVDD 0
+#define CHANNEL_ELVSS 1
+#define CHANNEL_AVDD 2
+#define CHANNEL_BUCK 3
+#define CHANNEL_L1 4
+#define CHANNEL_L2 5
+#define CHANNEL_L3 6
+#define CHANNEL_L4 7
+
+#define POWER_ELVDD 24500
+#define POWER_ELVSS 24500
+#define POWER_AVDD 3060
+#define POWER_BUCK 1525
+#define POWER_L1 5000
+#define POWER_L2 5000
+#define POWER_L3 5000
+#define POWER_L4 5000
+
+/* S2DOS05_REG_OCL */
+#define ADC_VALID_MASK BIT(7)
+/* S2DOS05_REG_PWRMT_CTRL1 */
+#define ADC_ASYNCRD_MASK BIT(7)
+#define PWRMT_EN_CHK BIT(6)
+#define SMPNUM_MASK 0x0F
+/* S2DOS05_REG_PWRMT_CTRL2 */
+#define ADC_EN_MASK BIT(7)
+#define ADC_PTR_MASK 0x0F
+#define POWER_MODE BIT(4)
+#define RAWCURRENT_MODE BIT(5)
+
+#define S2DOS05_MAX_ADC_CHANNEL 8
+
+#endif /* __LINUX_MFD_S2DOS05_H */
--
2.39.2
More information about the dri-devel
mailing list