[PATCH 4/4] drm: rcar-du: Add support for R8A779H0

[Jacopo Mondi]

Add support for R-Car R8A779H0 V4M which has similar characteristics
as the already supported R-Car V4H R8A779G0, but with a single output
channel.

Signed-off-by: Jacopo Mondi <jacopo.mondi at ideasonboard.com>

---
BSP patch
https://github.com/renesas-rcar/linux-bsp/commit/f2fc3314dab2052240653c1a31ba3d7c7190038e
---
---
 .../bindings/display/renesas,du.yaml           |  1 +
 drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c  | 18 ++++++++++++++++++
 .../gpu/drm/renesas/rcar-du/rcar_du_group.c    | 17 ++++++++++++-----
 3 files changed, 31 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
index c5b9e6812bce..d369953f16f7 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -41,6 +41,7 @@ properties:
       - renesas,du-r8a77995 # for R-Car D3 compatible DU
       - renesas,du-r8a779a0 # for R-Car V3U compatible DU
       - renesas,du-r8a779g0 # for R-Car V4H compatible DU
+      - renesas,du-r8a779h0 # for R-Car V4M compatible DU
 
   reg:
     maxItems: 1
diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
index dee530e4c8b2..a1d174b0b00b 100644
--- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c
@@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = {
 	.dsi_clk_mask =  BIT(1) | BIT(0),
 };
 
+static const struct rcar_du_device_info rcar_du_r8a779h0_info = {
+	.gen = 4,
+	.features = RCAR_DU_FEATURE_CRTC_IRQ
+		  | RCAR_DU_FEATURE_VSP1_SOURCE
+		  | RCAR_DU_FEATURE_NO_BLENDING,
+	.channels_mask = BIT(0),
+	.routes = {
+		/* R8A779H0 has a single MIPI DSI output. */
+		[RCAR_DU_OUTPUT_DSI0] = {
+			.possible_crtcs = BIT(0),
+			.port = 0,
+		},
+	},
+	.num_rpf = 5,
+	.dsi_clk_mask = BIT(0),
+};
+
 static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
 	{ .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
@@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = {
 	{ .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info },
 	{ .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info },
 	{ .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info },
+	{ .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info },
 	{ }
 };
 
diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
index 2ccd2581f544..361e1d01b817 100644
--- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
+++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c
@@ -111,6 +111,8 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp)
 		/*
 		 * On Gen3 dot clocks are setup through per-group registers,
 		 * only available when the group has two channels.
+		 *
+		 * R-Car V4M (R8A779H0) has only one channel, index is == 0.
 		 */
 		rcrtc = &rcdu->crtcs[rgrp->index * 2];
 		num_crtcs = rgrp->num_crtcs;
@@ -185,11 +187,16 @@ static void rcar_du_group_setup(struct rcar_du_group *rgrp)
 		dorcr |= DORCR_PG1T | DORCR_DK1S | DORCR_PG1D_DS1;
 	rcar_du_group_write(rgrp, DORCR, dorcr);
 
-	/* Apply planes to CRTCs association. */
-	mutex_lock(&rgrp->lock);
-	rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
-			    rgrp->dptsr_planes);
-	mutex_unlock(&rgrp->lock);
+	/*
+	 * Apply planes to CRTCs association, skip for V4M which has a single
+	 * channel.
+	 */
+	if (rcdu->info->gen < 4 || rgrp->num_crtcs > 1) {
+		mutex_lock(&rgrp->lock);
+		rcar_du_group_write(rgrp, DPTSR, (rgrp->dptsr_planes << 16) |
+				    rgrp->dptsr_planes);
+		mutex_unlock(&rgrp->lock);
+	}
 }
 
 /*
-- 
2.45.2