[PATCH v2 03/14] drm/mediatek: Fix XRGB setting error in OVL

Hsiao Chien Sung via B4 Relay devnull+shawn.sung.mediatek.com at kernel.org
Wed Jun 19 14:30:44 UTC 2024


From: Hsiao Chien Sung <shawn.sung at mediatek.com>

CONST_BLD must be enabled for XRGB formats although the alpha channel
can be ignored, or OVL will still read the value from memory.
This error only affects CRC generation.

Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Reviewed-by: CK Hu <ck.hu at mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
index b552a02d7eae..bd00e5e85deb 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
@@ -38,6 +38,7 @@
 #define DISP_REG_OVL_PITCH_MSB(n)		(0x0040 + 0x20 * (n))
 #define OVL_PITCH_MSB_2ND_SUBBUF			BIT(16)
 #define DISP_REG_OVL_PITCH(n)			(0x0044 + 0x20 * (n))
+#define OVL_CONST_BLEND					BIT(28)
 #define DISP_REG_OVL_RDMA_CTRL(n)		(0x00c0 + 0x20 * (n))
 #define DISP_REG_OVL_RDMA_GMC(n)		(0x00c8 + 0x20 * (n))
 #define DISP_REG_OVL_ADDR_MT2701		0x0040
@@ -407,6 +408,7 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 	unsigned int fmt = pending->format;
 	unsigned int offset = (pending->y << 16) | pending->x;
 	unsigned int src_size = (pending->height << 16) | pending->width;
+	unsigned int ignore_pixel_alpha = 0;
 	unsigned int con;
 	bool is_afbc = pending->modifier != DRM_FORMAT_MOD_LINEAR;
 	union overlay_pitch {
@@ -428,6 +430,14 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 	if (state->base.fb && state->base.fb->format->has_alpha)
 		con |= OVL_CON_AEN | OVL_CON_ALPHA;
 
+	/* CONST_BLD must be enabled for XRGB formats although the alpha channel
+	 * can be ignored, or OVL will still read the value from memory.
+	 * For RGB888 related formats, whether CONST_BLD is enabled or not won't
+	 * affect the result. Therefore we use !has_alpha as the condition.
+	 */
+	if (state->base.fb && !state->base.fb->format->has_alpha)
+		ignore_pixel_alpha = OVL_CONST_BLEND;
+
 	if (pending->rotation & DRM_MODE_REFLECT_Y) {
 		con |= OVL_CON_VIRT_FLIP;
 		addr += (pending->height - 1) * pending->pitch;
@@ -443,8 +453,8 @@ void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
 
 	mtk_ddp_write_relaxed(cmdq_pkt, con, &ovl->cmdq_reg, ovl->regs,
 			      DISP_REG_OVL_CON(idx));
-	mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb, &ovl->cmdq_reg, ovl->regs,
-			      DISP_REG_OVL_PITCH(idx));
+	mtk_ddp_write_relaxed(cmdq_pkt, overlay_pitch.split_pitch.lsb | ignore_pixel_alpha,
+			      &ovl->cmdq_reg, ovl->regs, DISP_REG_OVL_PITCH(idx));
 	mtk_ddp_write_relaxed(cmdq_pkt, src_size, &ovl->cmdq_reg, ovl->regs,
 			      DISP_REG_OVL_SRC_SIZE(idx));
 	mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl->regs,

-- 
Git-146)




More information about the dri-devel mailing list