[PATCH v2 12/14] drm/msm/hdmi: drop hpd-gpios support
Jessica Zhang
quic_jesszhan at quicinc.com
Wed Jun 19 18:47:05 UTC 2024
On 5/22/2024 3:51 AM, Dmitry Baryshkov wrote:
> Supporting simultaneous check of native HPD and the external GPIO proved
> to be less stable than just native HPD. Drop the hpd-gpios support,
> leaving just the native HPD support. In case the native HPD doesn't work
> the user is urged to switch to specifying the HPD property to the
> hdmi-connector device.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> ---
> drivers/gpu/drm/msm/hdmi/hdmi.c | 14 +++-------
> drivers/gpu/drm/msm/hdmi/hdmi.h | 2 --
> drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 53 +++----------------------------------
> 3 files changed, 7 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
> index e160a23e962e..a9437054c015 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
> @@ -468,17 +468,9 @@ static int msm_hdmi_dev_probe(struct platform_device *pdev)
> return dev_err_probe(dev, PTR_ERR(hdmi->extp_clk),
> "failed to get extp clock\n");
>
> - hdmi->hpd_gpiod = devm_gpiod_get_optional(&pdev->dev, "hpd", GPIOD_IN);
> - /* This will catch e.g. -EPROBE_DEFER */
> - if (IS_ERR(hdmi->hpd_gpiod))
> - return dev_err_probe(dev, PTR_ERR(hdmi->hpd_gpiod),
> - "failed to get hpd gpio\n");
> -
> - if (!hdmi->hpd_gpiod)
> - DBG("failed to get HPD gpio");
> -
> - if (hdmi->hpd_gpiod)
> - gpiod_set_consumer_name(hdmi->hpd_gpiod, "HDMI_HPD");
> + if (of_find_property(dev->of_node, "hpd-gpios", NULL) ||
> + of_find_property(dev->of_node, "hpd-gpio", NULL))
> + dev_warn(dev, "hpd-gpios is not supported anymore, please migrate to the hdmi-connector\n");
>
> ret = msm_hdmi_get_phy(hdmi);
> if (ret) {
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
> index 2a98efa8b6bd..268ff8604423 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi.h
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
> @@ -52,8 +52,6 @@ struct hdmi {
> struct clk_bulk_data *pwr_clks;
> struct clk *extp_clk;
>
> - struct gpio_desc *hpd_gpiod;
> -
> struct hdmi_phy *phy;
> struct device *phy_dev;
>
> diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> index 32e447267e3b..d3353c6148ed 100644
> --- a/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> +++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> @@ -69,9 +69,6 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
> int ret;
> unsigned long flags;
>
> - if (hdmi->hpd_gpiod)
> - gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
> -
> ret = pm_runtime_resume_and_get(dev);
> if (ret)
> return ret;
> @@ -144,8 +141,11 @@ void msm_hdmi_hpd_irq(struct drm_bridge *bridge)
> }
> }
>
> -static enum drm_connector_status detect_reg(struct hdmi *hdmi)
> +enum drm_connector_status msm_hdmi_bridge_detect(
> + struct drm_bridge *bridge)
> {
> + struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> + struct hdmi *hdmi = hdmi_bridge->hdmi;
> uint32_t hpd_int_status = 0;
> int ret;
>
> @@ -161,48 +161,3 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
> return (hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED) ?
> connector_status_connected : connector_status_disconnected;
> }
> -
> -#define HPD_GPIO_INDEX 2
> -static enum drm_connector_status detect_gpio(struct hdmi *hdmi)
> -{
> - return gpiod_get_value(hdmi->hpd_gpiod) ?
> - connector_status_connected :
> - connector_status_disconnected;
> -}
> -
> -enum drm_connector_status msm_hdmi_bridge_detect(
> - struct drm_bridge *bridge)
> -{
> - struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> - struct hdmi *hdmi = hdmi_bridge->hdmi;
> - enum drm_connector_status stat_gpio, stat_reg;
> - int retry = 20;
> -
> - /*
> - * some platforms may not have hpd gpio. Rely only on the status
> - * provided by REG_HDMI_HPD_INT_STATUS in this case.
> - */
> - if (!hdmi->hpd_gpiod)
> - return detect_reg(hdmi);
> -
> - do {
> - stat_gpio = detect_gpio(hdmi);
> - stat_reg = detect_reg(hdmi);
> -
> - if (stat_gpio == stat_reg)
> - break;
> -
> - mdelay(10);
> - } while (--retry);
> -
> - /* the status we get from reading gpio seems to be more reliable,
> - * so trust that one the most if we didn't manage to get hdmi and
> - * gpio status to agree:
> - */
> - if (stat_gpio != stat_reg) {
> - DBG("HDMI_HPD_INT_STATUS tells us: %d", stat_reg);
> - DBG("hpd gpio tells us: %d", stat_gpio);
> - }
> -
> - return stat_gpio;
> -}
>
> --
> 2.39.2
>
More information about the dri-devel
mailing list