[PATCH 00/31] Preparatory patches for BCM2712 (Pi5) support

[Dave Stevenson]

Hi

This set is a number of minor fixes that we've had downstream for a while,
and then lays down the some infrastructure changes to facilitate adding support
of BCM2712. I'm just finalising those patches so they should follow on fairly
soon.

Thanks
  Dave

Dave Stevenson (8):
  drm/vc4: Force trigger of dlist update on margins change
  drm/vc4: Set AXI panic modes for the HVS
  drm/vc4: Limit max_bpc to 8 on Pi0-3
  drm/vc4: Don't write gamma luts on 2711
  drm/vc4: UV planes vertical scaling must always be enabled
  drm/vc4: Fix dlist debug not resetting the next entry pointer
  drm/vc4: Remove incorrect limit from hvs_dlist debugfs function
  drm/vc4: Move the buffer offset out of the vc4_plane_state

Dom Cobley (7):
  drm/vc4: vc4_plane: Keep fractional source coords inside state
  drm/vc4: Handle fractional coordinates using the phase field
  drm/vc4: hdmi: Avoid log spam for audio start failure
  drm/vc4_plane: Add support for YUV444 formats
  drm/vc4: hdmi: Increase audio MAI fifo dreq threshold
  drm/vc4: hdmi: Avoid hang with debug registers when suspended
  drm/vc4: hvs: Remove ABORT_ON_EMPTY flag

Maxime Ripard (15):
  drm/vc4: hdmi: Warn if writing to an unknown HDMI register
  drm/vc4: hvs: More logging for dlist generation
  drm/vc4: hvs: Print error if we fail an allocation
  drm/vc4: plane: Add more debugging for LBM allocation
  drm/vc4: plane: Use return variable in atomic_check
  drm/vc4: crtc: Move assigned_channel to a variable
  drm/vc4: Introduce generation number enum
  drm/vc4: Make v3d paths unavailable on any generation newer than vc4
  drm/vc4: hvs: Use switch statement to simplify
    vc4_hvs_get_fifo_from_output
  drm/vc4: hvs: Create hw_init function
  drm/vc4: hvs: Create cob_init function
  drm/vc4: hvs: Rename hvs_regs list
  drm/vc4: plane: Change ptr0_offset to an array
  drm/vc4: hvs: Rework LBM alignment
  drm/vc4: hvs: Change prototype of __vc4_hvs_alloc to pass registers

Tim Gover (1):
  drm/vc4: Enable SCALER_CONTROL early in HVS init

 drivers/gpu/drm/vc4/tests/vc4_mock.c       |  14 +-
 drivers/gpu/drm/vc4/vc4_bo.c               |  28 +-
 drivers/gpu/drm/vc4/vc4_crtc.c             |  35 ++-
 drivers/gpu/drm/vc4/vc4_drv.c              |  22 +-
 drivers/gpu/drm/vc4/vc4_drv.h              |  29 +-
 drivers/gpu/drm/vc4/vc4_gem.c              |  24 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c             |  30 +-
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h        |   5 +-
 drivers/gpu/drm/vc4/vc4_hvs.c              | 343 +++++++++++++--------
 drivers/gpu/drm/vc4/vc4_irq.c              |  10 +-
 drivers/gpu/drm/vc4/vc4_kms.c              |  14 +-
 drivers/gpu/drm/vc4/vc4_perfmon.c          |  20 +-
 drivers/gpu/drm/vc4/vc4_plane.c            | 281 +++++++++++------
 drivers/gpu/drm/vc4/vc4_regs.h             |   1 +
 drivers/gpu/drm/vc4/vc4_render_cl.c        |   2 +-
 drivers/gpu/drm/vc4/vc4_v3d.c              |  10 +-
 drivers/gpu/drm/vc4/vc4_validate.c         |   8 +-
 drivers/gpu/drm/vc4/vc4_validate_shaders.c |   2 +-
 18 files changed, 540 insertions(+), 338 deletions(-)

-- 
2.34.1