[PATCH v2 31/31] drm/vc4: hvs: Correct logic on stopping an HVS channel

[Dave Stevenson]

When factoring out __vc4_hvs_stop_channel, the logic got inverted from
	if (condition)
	  // stop channel
to
	if (condition)
	  goto out
	//stop channel
	out:
and also changed the exact register writes used to stop the channel.

Correct the logic so that the channel is actually stopped, and revert
to the original register writes.

Fixes: 6d01a106b4c8 ("drm/vc4: crtc: Move HVS init and close to a function")
Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
---
 drivers/gpu/drm/vc4/vc4_hvs.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index be2173f6c58e..af79b19817d5 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -427,13 +427,11 @@ void vc4_hvs_stop_channel(struct vc4_hvs *hvs, unsigned int chan)
 	if (!drm_dev_enter(drm, &idx))
 		return;
 
-	if (HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_ENABLE)
+	if (!(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_ENABLE))
 		goto out;
 
-	HVS_WRITE(SCALER_DISPCTRLX(chan),
-		  HVS_READ(SCALER_DISPCTRLX(chan)) | SCALER_DISPCTRLX_RESET);
-	HVS_WRITE(SCALER_DISPCTRLX(chan),
-		  HVS_READ(SCALER_DISPCTRLX(chan)) & ~SCALER_DISPCTRLX_ENABLE);
+	HVS_WRITE(SCALER_DISPCTRLX(chan), SCALER_DISPCTRLX_RESET);
+	HVS_WRITE(SCALER_DISPCTRLX(chan), 0);
 
 	/* Once we leave, the scaler should be disabled and its fifo empty. */
 	WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET);
-- 
2.34.1