[PATCH v3 07/13] drm/msm/hdmi: add runtime PM calls to DDC transfer function

[Dmitry Baryshkov]

We must be sure that the HDMI controller is powered on, while performing
the DDC transfer. Add corresponding runtime PM calls to
msm_hdmi_i2c_xfer().

Reviewed-by: Jessica Zhang <quic_jesszhan at quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/hdmi/hdmi_i2c.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_i2c.c b/drivers/gpu/drm/msm/hdmi/hdmi_i2c.c
index 7aa500d24240..ebefea4fb408 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_i2c.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_i2c.c
@@ -107,11 +107,15 @@ static int msm_hdmi_i2c_xfer(struct i2c_adapter *i2c,
 	if (num == 0)
 		return num;
 
+	ret = pm_runtime_resume_and_get(&hdmi->pdev->dev);
+	if (ret)
+		return ret;
+
 	init_ddc(hdmi_i2c);
 
 	ret = ddc_clear_irq(hdmi_i2c);
 	if (ret)
-		return ret;
+		goto fail;
 
 	for (i = 0; i < num; i++) {
 		struct i2c_msg *p = &msgs[i];
@@ -169,7 +173,7 @@ static int msm_hdmi_i2c_xfer(struct i2c_adapter *i2c,
 				hdmi_read(hdmi, REG_HDMI_DDC_SW_STATUS),
 				hdmi_read(hdmi, REG_HDMI_DDC_HW_STATUS),
 				hdmi_read(hdmi, REG_HDMI_DDC_INT_CTRL));
-		return ret;
+		goto fail;
 	}
 
 	ddc_status = hdmi_read(hdmi, REG_HDMI_DDC_SW_STATUS);
@@ -202,7 +206,13 @@ static int msm_hdmi_i2c_xfer(struct i2c_adapter *i2c,
 		}
 	}
 
+	pm_runtime_put(&hdmi->pdev->dev);
+
 	return i;
+
+fail:
+	pm_runtime_put(&hdmi->pdev->dev);
+	return ret;
 }
 
 static u32 msm_hdmi_i2c_func(struct i2c_adapter *adapter)

-- 
2.39.2