[PATCH v4 10/10] drm/vs: add simple dsi encoder
Keith Zhao
keith.zhao at starfivetech.com
Sun Jun 23 07:17:09 UTC 2024
Hi Dmitry:
> -----Original Message-----
> From: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Sent: 2024年5月21日 23:25
> To: Keith Zhao <keith.zhao at starfivetech.com>
> Cc: andrzej.hajda at intel.com; neil.armstrong at linaro.org; rfoss at kernel.org;
> Laurent.pinchart at ideasonboard.com; jonas at kwiboo.se;
> jernej.skrabec at gmail.com; maarten.lankhorst at linux.intel.com;
> mripard at kernel.org; tzimmermann at suse.de; airlied at gmail.com;
> daniel at ffwll.ch; robh at kernel.org; krzk+dt at kernel.org; conor+dt at kernel.org;
> hjc at rock-chips.com; heiko at sntech.de; andy.yan at rock-chips.com; Xingyu Wu
> <xingyu.wu at starfivetech.com>; p.zabel at pengutronix.de; Jack Zhu
> <jack.zhu at starfivetech.com>; Shengyang Chen
> <shengyang.chen at starfivetech.com>; dri-devel at lists.freedesktop.org;
> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v4 10/10] drm/vs: add simple dsi encoder
>
> On Tue, May 21, 2024 at 06:58:17PM +0800, keith wrote:
> > add encoder to match cdns dsi driver
> >
> > Signed-off-by: keith <keith.zhao at starfivetech.com>
>
> Please fix your git configuration to include your full name into the S-o-B and
> Author fields.
Ok ,will fix it
>
> > ---
> > drivers/gpu/drm/verisilicon/Makefile | 3 +-
> > drivers/gpu/drm/verisilicon/vs_drv.c | 1 +
> > drivers/gpu/drm/verisilicon/vs_drv.h | 1 +
> > drivers/gpu/drm/verisilicon/vs_simple_enc.c | 190
> > ++++++++++++++++++++ drivers/gpu/drm/verisilicon/vs_simple_enc.h |
> > 25 +++
> > 5 files changed, 219 insertions(+), 1 deletion(-) create mode 100644
> > drivers/gpu/drm/verisilicon/vs_simple_enc.c
> > create mode 100644 drivers/gpu/drm/verisilicon/vs_simple_enc.h
> >
> > diff --git a/drivers/gpu/drm/verisilicon/Makefile
> > b/drivers/gpu/drm/verisilicon/Makefile
> > index 2d02b4a3a567..c35ba9bd6f81 100644
> > --- a/drivers/gpu/drm/verisilicon/Makefile
> > +++ b/drivers/gpu/drm/verisilicon/Makefile
> > @@ -4,7 +4,8 @@ vs_drm-objs := vs_dc_hw.o \
> > vs_modeset.o \
> > vs_plane.o \
> > vs_crtc.o \
> > - vs_drv.o
> > + vs_drv.o \
> > + vs_simple_enc.o
> >
> > vs_drm-$(CONFIG_DRM_INNO_STARFIVE_HDMI) += inno_hdmi-starfive.o
> > obj-$(CONFIG_DRM_VERISILICON_DC8200) += vs_drm.o diff --git
> > a/drivers/gpu/drm/verisilicon/vs_drv.c
> > b/drivers/gpu/drm/verisilicon/vs_drv.c
> > index 6f04102b05b3..2748d48f2c7e 100644
> > --- a/drivers/gpu/drm/verisilicon/vs_drv.c
> > +++ b/drivers/gpu/drm/verisilicon/vs_drv.c
> > @@ -612,6 +612,7 @@ static struct platform_driver *drm_sub_drivers[] =
> > { #ifdef CONFIG_DRM_INNO_STARFIVE_HDMI
> > &starfive_hdmi_driver,
> > #endif
> > + &simple_encoder_driver,
> > };
> >
> > static struct component_match *vs_add_external_components(struct
> > device *dev) diff --git a/drivers/gpu/drm/verisilicon/vs_drv.h
> > b/drivers/gpu/drm/verisilicon/vs_drv.h
> > index c3c08ed5f8ac..f3f0f170777d 100644
> > --- a/drivers/gpu/drm/verisilicon/vs_drv.h
> > +++ b/drivers/gpu/drm/verisilicon/vs_drv.h
> > @@ -17,6 +17,7 @@
> > #include <drm/drm_managed.h>
> >
> > #include "vs_dc_hw.h"
> > +#include "vs_simple_enc.h"
> >
> > /*@pitch_alignment: buffer pitch alignment required by sub-devices.*/
> > struct vs_drm_device { diff --git
> > a/drivers/gpu/drm/verisilicon/vs_simple_enc.c
> > b/drivers/gpu/drm/verisilicon/vs_simple_enc.c
> > new file mode 100644
> > index 000000000000..d0b1755d77d2
> > --- /dev/null
> > +++ b/drivers/gpu/drm/verisilicon/vs_simple_enc.c
> > @@ -0,0 +1,190 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2020 VeriSilicon Holdings Co., Ltd.
>
> Now it is 2024, so the copyright should probably cover the range.
Ok ,will fix it
>
> > + */
> > +#include <linux/component.h>
> > +#include <linux/of_device.h>
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/media-bus-format.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/of.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_bridge.h>
> > +#include <drm/drm_crtc_helper.h>
> > +#include <drm/drm_of.h>
> > +
> > +#include "vs_crtc.h"
> > +#include "vs_simple_enc.h"
> > +
> > +static const struct simple_encoder_priv dsi_priv = {
> > + .encoder_type = DRM_MODE_ENCODER_DSI
>
> So, is it 'simple' aka something generic or DSI? In the latter case, please rename
> it accordingly.
Ok will done
>
> > +};
> > +
> > +static inline struct vs_simple_encoder *to_simple_encoder(struct
> > +drm_encoder *enc) {
> > + return container_of(enc, struct vs_simple_encoder, encoder); }
> > +
> > +static int encoder_parse_dt(struct device *dev) {
> > + struct vs_simple_encoder *simple = dev_get_drvdata(dev);
> > + unsigned int args[2];
> > +
> > + simple->dss_regmap =
> syscon_regmap_lookup_by_phandle_args(dev->of_node,
> > + "starfive,syscon",
> > + 2, args);
> > +
> > + if (IS_ERR(simple->dss_regmap)) {
> > + return dev_err_probe(dev, PTR_ERR(simple->dss_regmap),
> > + "getting the regmap failed\n");
> > + }
> > +
> > + simple->offset = args[0];
> > + simple->mask = args[1];
>
> Is the value that you've read platform dependent or use case dependent?
> What is the actual value being written? Why are you using syscon for it?
The syscon is used to select crtcs binded with encoder,
If this encoder binds to crtc0 , set the syscon reg bit0 = 1
If this encoder binds to crtc1 , set the syscon reg bit1 = 1 (0x2)
Maybe I can do this by the possible_crtc instead of using args from dts
>
> > +
> > + return 0;
> > +}
> > +
> > +static void vs_encoder_atomic_enable(struct drm_encoder *encoder,
> > +struct drm_atomic_state *state) {
> > + struct vs_simple_encoder *simple = to_simple_encoder(encoder);
> > +
> > + regmap_update_bits(simple->dss_regmap, simple->offset, simple->mask,
> > +simple->mask);
>
>
> A purist in me would ask to have separate mask and value to write.
Understand , will avoid this action
>
> > +}
>
> Is it necessary to clear those bits when stopping the stream?
No need to do this , if clear those bits , the encoder will point to a unknown crtc
>
>
> [skipped the rest]
>
> > +
> > +
> > +struct platform_driver simple_encoder_driver = {
> > + .probe = vs_encoder_probe,
> > + .remove = vs_encoder_remove,
> > + .driver = {
> > + .name = "vs-simple-encoder",
> > + .of_match_table = of_match_ptr(simple_encoder_dt_match),
> > + },
> > +};
> > +
> > +MODULE_DESCRIPTION("Simple Encoder Driver");
>
> VeriSilicon DSI Encoder
Ok will done
>
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/gpu/drm/verisilicon/vs_simple_enc.h
> > b/drivers/gpu/drm/verisilicon/vs_simple_enc.h
> > new file mode 100644
> > index 000000000000..73e356bfeb2c
> > --- /dev/null
> > +++ b/drivers/gpu/drm/verisilicon/vs_simple_enc.h
> > @@ -0,0 +1,25 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2022 VeriSilicon Holdings Co., Ltd.
> > + */
> > +
> > +#ifndef __VS_SIMPLE_ENC_H_
> > +#define __VS_SIMPLE_ENC_H_
> > +
> > +#include <drm/drm_encoder.h>
> > +
> > +struct simple_encoder_priv {
> > + unsigned char encoder_type;
> > +};
> > +
> > +struct vs_simple_encoder {
> > + struct drm_encoder encoder;
> > + struct device *dev;
> > + const struct simple_encoder_priv *priv;
> > + struct regmap *dss_regmap;
> > + unsigned int offset;
> > + unsigned int mask;
> > +};
>
> Is there a need for aheader for the encoder? Can you move the definitions to
> the source file?
Ok will done
>
> > +
> > +extern struct platform_driver simple_encoder_driver; #endif /*
> > +__VS_SIMPLE_ENC_H_ */
> > --
> > 2.27.0
> >
>
> --
> With best wishes
> Dmitry
More information about the dri-devel
mailing list