[PATCH 2/7] dt-bindings: input: touchscreen: document synaptics TCM oncell

[Rob Herring (Arm)]

On Mon, 24 Jun 2024 03:30:26 +0200, Caleb Connolly wrote:
> Document the Synaptics TCM oncell series of touchscreens, starting with
> the s3908.
> 
> Signed-off-by: Caleb Connolly <caleb at postmarketos.org>
> ---
>  .../input/touchscreen/syna,tcm-oncell.yaml         | 66 ++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
 	 $id: http://devicetree.org/schemas/input/touchscreen/syna,s3908.yaml
 	file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.yaml
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dts:27.13-26: Warning (reg_format): /example-0/i2c/touchscreen at 4b:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dts:21.13-36.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dts:21.13-36.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dts:25.26-35.13: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 4b: Relying on default #address-cells value
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dts:25.26-35.13: Warning (avoid_default_addr_size): /example-0/i2c/touchscreen at 4b: Relying on default #size-cells value
Documentation/devicetree/bindings/input/touchscreen/syna,tcm-oncell.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240624-oneplus8-v1-2-388eecf2dff7@postmarketos.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.