[PATCH v5 4/5] drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel

[Doug Anderson]

Hi,

On Mon, Jun 24, 2024 at 7:21 AM Zhaoxiong Lv
<lvzhaoxiong at huaqin.corp-partner.google.com> wrote:
>
> The K&d kd101ne3-40ti is a 10.1" WXGA TFT-LCD panel, use
> jd9365da controller,which fits in nicely with the existing
> panel-jadard-jd9365da-h3 driver.Hence,we add a new compatible
> with panel specific config.
>
> Although they have the same control IC, the two panels are different,
> and the timing will be slightly different, so we added some variables
> in struct jadard_panel_desc to control the timing.
>
> Signed-off-by: Zhaoxiong Lv <lvzhaoxiong at huaqin.corp-partner.google.com>
> ---
> Changes between V5 and V4:
> -  1. Add a "_ms" suffix to the variables.
> -  2. Use more "_multi" in the enable/disable function
> -  3. Use mipi_dsi_dcs_write_seq_multi() in the init() function.
>
> V4:https://lore.kernel.org/all/20240620080509.18504-4-lvzhaoxiong@huaqin.corp-partner.google.com/
>
> Changes between V4 and V3:
> -  1. Use mipi_dsi_msleep.
> -  2. Adjust the ".clock" assignment format.
> -  3. Adjust "compatible" positions to keep the list sorted.
>
> V3:https://lore.kernel.org/all/20240614145510.22965-4-lvzhaoxiong@huaqin.corp-partner.google.com/
>
> Changes between V3 and V2:
> -  1. Give up creating a new driver and re-add K&d kd101ne3-40ti
> -     configuration to the panel-jadard-jd9365da-h3.c driver.
>
> V2:https://lore.kernel.org/all/20240601084528.22502-3-lvzhaoxiong@huaqin.corp-partner.google.com/
>
> Changes between V2 and V1:
> -  1. Use the new mipi_dsi_dcs_write_seq_multi() function.
> -  2. Modify Move mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode() to disable(),
> -  and drop kingdisplay_panel_enter_sleep_mode().
> -  3. If prepare fails, disable GPIO before regulators.
> -  4. This function drm_connector_set_panel_orientation() is no longer used. Delete it.
> -  5. Drop ".shutdown = kingdisplay_panel_shutdown".
>
> ---
>  .../gpu/drm/panel/panel-jadard-jd9365da-h3.c  | 277 ++++++++++++++++++
>  1 file changed, 277 insertions(+)

It still seems weird to me that the other variants of the same panel
don't need similar delays, but the code looks fine to me now:

Reviewed-by: Douglas Anderson <dianders at chromium.org>