[PATCH v6 0/5] Add kd101ne3-40ti configuration in driver jd9365da

Zhaoxiong Lv lvzhaoxiong at huaqin.corp-partner.google.com
Fri Jun 28 12:44:39 UTC 2024


This kingdisplay panel uses the jd9365da controller, so add it to 
panel-jadard-jd9365da-h3.c driver, but because the init_code and timing 
are different, some variables are added in struct jadard_panel_des to 
control it.

In addition, since sending init_code in the enable() function takes a long time, 
it is moved to the prepare() function.

Changes between V6 and V5:
- PATCH 1/5: No changes.
- PATCH 2/5: No changes.
- PATCH 3/5: Convert the hex from UPPERCASE to lowercase.
- PATCH 4/5: No changes.
- PATCH 5/5: No changes..
- Link to v5: https://lore.kernel.org/all/20240624141926.5250-1-lvzhaoxiong@huaqin.corp-partner.google.com/

Changes between V5 and V4:
- PATCH 1/5: No changes.
- PATCH 2/5: No changes.
- PATCH 3/5: New Patch, Switch jd9365da to use mipi_dsi_dcs_write_seq_multi() but no
-            functional changes.
- PATCH 4/5: Add a "_ms" suffix to the variables.
-            Use more "_multi" in the enable/disable function
-            Use mipi_dsi_dcs_write_seq_multi() in the init() function.
- PATCH 5/5: Use dev_err_probe().
- Link to v4: https://lore.kernel.org/all/20240620080509.18504-1-lvzhaoxiong@huaqin.corp-partner.google.com/

Changes between V4 and V3:
- PATCH 1/4: Only move mipi_dsi_dcs_write_buffer from enable() function to prepare() function,
-            and no longer use mipi_dsi_dcs_write_seq_multi.
- PATCH 2/4: Move positions to keep the list sorted.
- PATCH 3/4: Use mipi_dsi_msleep.
-            Adjust the ".clock" assignment format.
-            Adjust "compatible" positions to keep the list sorted.
- PATCH 4/4: No changes.
- Link to v3: https://lore.kernel.org/all/20240614145510.22965-1-lvzhaoxiong@huaqin.corp-partner.google.com/

Changes between V3 and V2:
- PATCH 1/4: Modify the init_code sending method
- PATCH 2/4: Add binding for kingdisplay-kd101ne3 in jadard,jd9365da-h3.yaml
- PATCH 3/4: Add compatibility for kingdisplay-kd101ne3 in panel-jadard-jd9365da-h3.c driver,
-            and add some variables to control timing.
- PATCH 4/4: Add the function of adjusting orientation.
- Link to v2: https://lore.kernel.org/all/20240601084528.22502-1-lvzhaoxiong@huaqin.corp-partner.google.com/

Changes between V2 and V1:
- PATCH 1/4: Delete some unnecessary information.
- PATCH 2/4: Use the new mipi_dsi_dcs_write_seq_multi() function, deleted some unnecessary functions.
- PATCH 3/4: Add compatible for Starry-er88577.
- PATCH 4/4: Add starry panel configuration in panel-kingdisplay-kd101ne3 driver.
- Link to v1: https://lore.kernel.org/all/20240418081548.12160-1-lvzhaoxiong@huaqin.corp-partner.google.com/

Zhaoxiong Lv (5):
  drm/panel: jd9365da: Modify the method of sending commands
  dt-bindings: display: panel: Add compatible for kingdisplay-kd101ne3
  drm/panel: panel-jadard-jd9365da-h3: use wrapped MIPI DCS functions
  drm/panel: jd9365da: Support for kd101ne3-40ti MIPI-DSI panel
  drm/panel: jd9365da: Add the function of adjusting orientation

 .../display/panel/jadard,jd9365da-h3.yaml     |    1 +
 .../gpu/drm/panel/panel-jadard-jd9365da-h3.c  | 1088 +++++++++++------
 2 files changed, 682 insertions(+), 407 deletions(-)

-- 
2.17.1



More information about the dri-devel mailing list