[PATCH v2 1/8] dt-bindings: panel: document Samsung AMB655X
Rob Herring (Arm)
robh at kernel.org
Sun Jun 30 19:55:24 UTC 2024
On Sun, 30 Jun 2024 20:36:24 +0200, Caleb Connolly wrote:
> Describe the Samsung AMB655X panel. It has three supplies.
>
> Signed-off-by: Caleb Connolly <caleb at postmarketos.org>
> ---
> .../bindings/display/panel/samsung,amb655x.yaml | 63 ++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dts:20.11-21: Warning (reg_format): /example-0/panel at 0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/display/panel/samsung,amb655x.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240630-oneplus8-v2-1-c4a1f8da74f1@postmarketos.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
More information about the dri-devel
mailing list