[PATCH v5 05/13] drm/mediatek: Set DRM mode configs accordingly

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Thu, 2024-02-15 at 18:11 +0800, Hsiao Chien Sung wrote:
> Set DRM mode configs limitation according to the hardware
> capabilities
> and pass the IGT checks as below:
> 
> - The test "graphics.IgtKms.kms_plane" requires a frame buffer with
>   width of 4512 pixels (> 4096).
> - The test "graphics.IgtKms.kms_cursor_crc" checks if the cursor size
> is
>   defined, and run the test with cursor size from 1x1 to 512x512.
> 
> Please notice that the test conditions may change as IGT is updated.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c | 25
> +++++++++++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.h |  3 +++
>  2 files changed, 28 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 890e1e93a2227..8cf157ec66ba6 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -296,6 +296,9 @@ static const struct mtk_mmsys_driver_data
> mt8188_vdosys0_driver_data = {
>  	.conn_routes = mt8188_mtk_ddp_main_routes,
>  	.num_conn_routes = ARRAY_SIZE(mt8188_mtk_ddp_main_routes),
>  	.mmsys_dev_num = 2,
> +	.max_pitch = GENMASK(15, 0),
> +	.min_width = 1,
> +	.min_height = 1,
>  };
>  
>  static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data =
> {
> @@ -310,6 +313,9 @@ static const struct mtk_mmsys_driver_data
> mt8195_vdosys0_driver_data = {
>  	.main_path = mt8195_mtk_ddp_main,
>  	.main_len = ARRAY_SIZE(mt8195_mtk_ddp_main),
>  	.mmsys_dev_num = 2,
> +	.max_pitch = GENMASK(15, 0),
> +	.min_width = 1,
> +	.min_height = 1,
>  };
>  
>  static const struct mtk_mmsys_driver_data mt8195_vdosys1_driver_data
> = {
> @@ -317,6 +323,9 @@ static const struct mtk_mmsys_driver_data
> mt8195_vdosys1_driver_data = {
>  	.ext_len = ARRAY_SIZE(mt8195_mtk_ddp_ext),
>  	.mmsys_id = 1,
>  	.mmsys_dev_num = 2,
> +	.max_pitch = GENMASK(15, 0),
> +	.min_width = 2, /* 2-pixel align when ethdr is bypassed */
> +	.min_height = 1,
>  };
>  
>  static const struct of_device_id mtk_drm_of_ids[] = {
> @@ -495,6 +504,18 @@ static int mtk_drm_kms_init(struct drm_device
> *drm)
>  		for (j = 0; j < private->data->mmsys_dev_num; j++) {
>  			priv_n = private->all_drm_private[j];
>  
> +			if (priv_n->data->max_pitch) {
> +				/* Save 4 bytes for the color depth
> (pitch = width * bpp) */
> +				drm->mode_config.max_width  = priv_n-
> >data->max_pitch >> 2;
> +				drm->mode_config.max_height = priv_n-
> >data->max_pitch >> 2;

I think the term 'pitch' is for width not for height. And I think you
should not divide height by 4. So I would like to have priv_n->data-
>max_height.

Regards,
CK

> +			}
> +
> +			if (priv_n->data->min_width)
> +				drm->mode_config.min_width = priv_n-
> >data->min_width;
> +
> +			if (priv_n->data->min_height)
> +				drm->mode_config.min_height = priv_n-
> >data->min_height;
> +
>  			if (i == CRTC_MAIN && priv_n->data->main_len) {
>  				ret = mtk_drm_crtc_create(drm, priv_n-
> >data->main_path,
>  							  priv_n->data-
> >main_len, j,
> @@ -522,6 +543,10 @@ static int mtk_drm_kms_init(struct drm_device
> *drm)
>  		}
>  	}
>  
> +	/* IGT will check if the cursor size is configured */
> +	drm->mode_config.cursor_width = drm->mode_config.max_width;
> +	drm->mode_config.cursor_height = drm->mode_config.max_height;
> +
>  	/* Use OVL device for all DMA memory allocations */
>  	crtc = drm_crtc_from_index(drm, 0);
>  	if (crtc)
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> index 33fadb08dc1c7..414764b4546ba 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> @@ -46,6 +46,9 @@ struct mtk_mmsys_driver_data {
>  	bool shadow_register;
>  	unsigned int mmsys_id;
>  	unsigned int mmsys_dev_num;
> +
> +	u32 max_pitch;
> +	int min_width, min_height;
>  };
>  
>  struct mtk_drm_private {
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20240301/fda9422e/attachment-0001.htm>