[PATCH V2 1/2] drm/bridge: adv7511: Allow IRQ to share GPIO pins

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Mar 5 08:18:16 UTC 2024


Hello Adam,

Thank you for the patch.

On Mon, Mar 04, 2024 at 06:48:57PM -0600, Adam Ford wrote:
> The IRQ registration currently assumes that the GPIO is dedicated
> to it, but that may not necessarily be the case. If the board has
> another device sharing the GPIO, it won't be registered and the
> hot-plug detect fails to function.
> 
> Currently, the handler reads two registers and blindly
> assumes one of them caused the interrupt and returns IRQ_HANDLED
> unless there is an error. In order to properly do this, the IRQ
> handler needs to check if it needs to handle the IRQ and return
> IRQ_NONE if there is nothing to handle.  With the check added
> and the return code properly indicating whether or not it there
> was an IRQ, the IRQF_SHARED can be set to share a GPIO IRQ.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

> ---
> V2:  Add check to see if there is IRQ data to handle
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index b5518ff97165..f3b4616a8fb6 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -477,6 +477,11 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
>  	if (ret < 0)
>  		return ret;
>  
> +	/* If there is no IRQ to handle, exit indicating no IRQ data */
> +	if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
> +	    !(irq1 & ADV7511_INT1_DDC_ERROR))
> +		return -ENODATA;
> +
>  	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
>  	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
>  
> @@ -1318,7 +1323,8 @@ static int adv7511_probe(struct i2c_client *i2c)
>  
>  		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
>  						adv7511_irq_handler,
> -						IRQF_ONESHOT, dev_name(dev),
> +						IRQF_ONESHOT | IRQF_SHARED,
> +						dev_name(dev),
>  						adv7511);
>  		if (ret)
>  			goto err_unregister_audio;

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list