[PATCH] drm/amdgpu: cache in more vm fault information
Khatri, Sunil
sukhatri at amd.com
Wed Mar 6 16:26:48 UTC 2024
On 3/6/2024 9:49 PM, Christian König wrote:
> Am 06.03.24 um 17:06 schrieb Khatri, Sunil:
>>
>> On 3/6/2024 9:07 PM, Christian König wrote:
>>> Am 06.03.24 um 16:13 schrieb Khatri, Sunil:
>>>>
>>>> On 3/6/2024 8:34 PM, Christian König wrote:
>>>>> Am 06.03.24 um 15:29 schrieb Alex Deucher:
>>>>>> On Wed, Mar 6, 2024 at 8:04 AM Khatri, Sunil <sukhatri at amd.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> On 3/6/2024 6:12 PM, Christian König wrote:
>>>>>>>> Am 06.03.24 um 11:40 schrieb Khatri, Sunil:
>>>>>>>>> On 3/6/2024 3:37 PM, Christian König wrote:
>>>>>>>>>> Am 06.03.24 um 10:04 schrieb Sunil Khatri:
>>>>>>>>>>> When an page fault interrupt is raised there
>>>>>>>>>>> is a lot more information that is useful for
>>>>>>>>>>> developers to analyse the pagefault.
>>>>>>>>>> Well actually those information are not that interesting because
>>>>>>>>>> they are hw generation specific.
>>>>>>>>>>
>>>>>>>>>> You should probably rather use the decoded strings here, e.g.
>>>>>>>>>> hub,
>>>>>>>>>> client, xcc_id, node_id etc...
>>>>>>>>>>
>>>>>>>>>> See gmc_v9_0_process_interrupt() an example.
>>>>>>>>>> I saw this v9 does provide more information than what v10 and
>>>>>>>>>> v11
>>>>>>>>>> provide like node_id and fault from which die but thats again
>>>>>>>>>> very
>>>>>>>>>> specific to IP_VERSION(9, 4, 3)) i dont know why thats
>>>>>>>>>> information
>>>>>>>>>> is not there in v10 and v11.
>>>>>>>>> I agree to your point but, as of now during a pagefault we are
>>>>>>>>> dumping this information which is useful like which client
>>>>>>>>> has generated an interrupt and for which src and other
>>>>>>>>> information
>>>>>>>>> like address. So i think to provide the similar information in
>>>>>>>>> the
>>>>>>>>> devcoredump.
>>>>>>>>>
>>>>>>>>> Currently we do not have all this information from either job
>>>>>>>>> or vm
>>>>>>>>> being derived from the job during a reset. We surely could add
>>>>>>>>> more
>>>>>>>>> relevant information later on as per request but this
>>>>>>>>> information is
>>>>>>>>> useful as
>>>>>>>>> eventually its developers only who would use the dump file
>>>>>>>>> provided
>>>>>>>>> by customer to debug.
>>>>>>>>>
>>>>>>>>> Below is the information that i dump in devcore and i feel
>>>>>>>>> that is
>>>>>>>>> good information but new information could be added which
>>>>>>>>> could be
>>>>>>>>> picked later.
>>>>>>>>>
>>>>>>>>>> Page fault information
>>>>>>>>>> [gfxhub] page fault (src_id:0 ring:24 vmid:3 pasid:32773)
>>>>>>>>>> in page starting at address 0x0000000000000000 from client
>>>>>>>>>> 0x1b (UTCL2)
>>>>>>>> This is a perfect example what I mean. You record in the patch
>>>>>>>> is the
>>>>>>>> client_id, but this is is basically meaningless unless you have
>>>>>>>> access
>>>>>>>> to the AMD internal hw documentation.
>>>>>>>>
>>>>>>>> What you really need is the client in decoded form, in this case
>>>>>>>> UTCL2. You can keep the client_id additionally, but the decoded
>>>>>>>> client
>>>>>>>> string is mandatory to have I think.
>>>>>>>>
>>>>>>>> Sure i am capturing that information as i am trying to minimise
>>>>>>>> the
>>>>>>>> memory interaction to minimum as we are still in interrupt context
>>>>>>>> here that why i recorded the integer information compared to
>>>>>>>> decoding
>>>>>>> and writing strings there itself but to postpone till we dump.
>>>>>>>
>>>>>>> Like decoding to the gfxhub/mmhub based on vmhub/vmid_src and
>>>>>>> client
>>>>>>> string from client id. So are we good to go with the information
>>>>>>> with
>>>>>>> the above information of sharing details in devcoredump using the
>>>>>>> additional information from pagefault cached.
>>>>>> I think amdgpu_vm_fault_info() has everything you need already
>>>>>> (vmhub,
>>>>>> status, and addr). client_id and src_id are just tokens in the
>>>>>> interrupt cookie so we know which IP to route the interrupt to. We
>>>>>> know what they will be because otherwise we'd be in the interrupt
>>>>>> handler for a different IP. I don't think ring_id has any useful
>>>>>> information in this context and vmid and pasid are probably not too
>>>>>> useful because they are just tokens to associate the fault with a
>>>>>> process. It would be better to have the process name.
>>>>
>>>> Just to share context here Alex, i am preparing this for
>>>> devcoredump, my intention was to replicate the information which in
>>>> KMD we are sharing in Dmesg for page faults. If assuming we do not
>>>> add client id specially we would not be able to share enough
>>>> information in devcoredump.
>>>> It would be just address and hub(gfxhub/mmhub) and i think that is
>>>> partial information as src id and client id and ip block shares
>>>> good information.
>>>>
>>>> For process related information we are capturing that information
>>>> part of dump from existing functionality.
>>>> **** AMDGPU Device Coredump ****
>>>> version: 1
>>>> kernel: 6.7.0-amd-staging-drm-next
>>>> module: amdgpu
>>>> time: 45.084775181
>>>> process_name: soft_recovery_p PID: 1780
>>>>
>>>> Ring timed out details
>>>> IP Type: 0 Ring Name: gfx_0.0.0
>>>>
>>>> Page fault information
>>>> [gfxhub] page fault (src_id:0 ring:24 vmid:3 pasid:32773)
>>>> in page starting at address 0x0000000000000000 from client 0x1b
>>>> (UTCL2)
>>>> VRAM is lost due to GPU reset!
>>>>
>>>> Regards
>>>> Sunil
>>>>
>>>>>
>>>>> The decoded client name would be really useful I think since the
>>>>> fault handled is a catch all and handles a whole bunch of
>>>>> different clients.
>>>>>
>>>>> But that should be ideally passed in as const string instead of
>>>>> the hw generation specific client_id.
>>>>>
>>>>> As long as it's only a pointer we also don't run into the trouble
>>>>> that we need to allocate memory for it.
>>>>
>>>> I agree but i prefer adding the client id and decoding it in
>>>> devcorecump using soc15_ih_clientid_name[fault_info->client_id]) is
>>>> better else we have to do an sprintf this string to fault_info in
>>>> irq context which is writing more bytes to memory i guess compared
>>>> to an integer:)
>>>
>>> Well I totally agree that we shouldn't fiddle to much in the
>>> interrupt handler, but exactly what you suggest here won't work.
>>>
>>> The client_id is hw generation specific, so the only one who has
>>> that is the hw generation specific fault handler. Just compare the
>>> defines here:
>>>
>>> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c#L83
>>>
>>>
>>> and here:
>>>
>>> https://elixir.bootlin.com/linux/latest/source/drivers/gpu/drm/amd/amdgpu/gfxhub_v11_5_0.c#L38
>>>
>>>
>> Got your point. Let me see but this is a lot of work in irq context.
>> Either we can drop totally the client id thing as alex is suggesting
>> here as its always be same client and src id or let me come up with a
>> patch and see if its acceptable.
>
> Wait a second, I now realized that you are mixing something up here.
> As Alex said the src_id and client_id in the IV are always the same,
> e.g. the VMC or the UTCL2.
>
> This is the client_id which send the IV to IH so that the IH can write
> it into the ring buffer and we end up in the fault handler.
>
> But additional to that we also have a client_id inside the fault and
> that is the value printed in the logs. This is the client which caused
> the fault inside the VMC or UTCL2.
>
Yes the value remains the same irrespective of the family. Client always
will be VMC/UTCL2 so i think as Alex suggested we can drop this
information or just add a hardcoded string for information purposes only.
>>
>> Also as Alex pointed we need to decode from status register which
>> kind of page fault it is (permission, read, write etc) this all is
>> again family specific and thats all in IRQ context. Not feeling good
>> about it but let me try to share all that in a new patch.
>
> Yeah, but that is all hw specific. I'm not sure how best to put it
> into a devcoredump.
>
> Maybe just record the 32bit value and re-design the GMC code to have
> that decoded into a string for both the system log and the devcoredump.
>
> Alex suggested a good way to just share the value of status register
> and add family information and let developer use the family/asic id to
> check the register value and decode it manually.
>
Regards
Sunil.
>
>
>>
>> Regards
>> Sunil.
>>
>>> Regards,
>>> Christian.
>>>
>>>>
>>>> We can argue on values like pasid and vmid and ring id to be taken
>>>> off if they are totally not useful.
>>>>
>>>> Regards
>>>> Sunil
>>>>
>>>>>
>>>>> Christian.
>>>>>
>>>>>>
>>>>>> Alex
>>>>>>
>>>>>>> regards
>>>>>>> sunil
>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Christian.
>>>>>>>>
>>>>>>>>> Regards
>>>>>>>>> Sunil Khatri
>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>> Christian.
>>>>>>>>>>
>>>>>>>>>>> Add all such information in the last cached
>>>>>>>>>>> pagefault from an interrupt handler.
>>>>>>>>>>>
>>>>>>>>>>> Signed-off-by: Sunil Khatri <sunil.khatri at amd.com>
>>>>>>>>>>> ---
>>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 9 +++++++--
>>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h | 7 ++++++-
>>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 2 +-
>>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c | 2 +-
>>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c | 2 +-
>>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 2 +-
>>>>>>>>>>> drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 2 +-
>>>>>>>>>>> 7 files changed, 18 insertions(+), 8 deletions(-)
>>>>>>>>>>>
>>>>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
>>>>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
>>>>>>>>>>> index 4299ce386322..b77e8e28769d 100644
>>>>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
>>>>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
>>>>>>>>>>> @@ -2905,7 +2905,7 @@ void amdgpu_debugfs_vm_bo_info(struct
>>>>>>>>>>> amdgpu_vm *vm, struct seq_file *m)
>>>>>>>>>>> * Cache the fault info for later use by userspace in
>>>>>>>>>>> debugging.
>>>>>>>>>>> */
>>>>>>>>>>> void amdgpu_vm_update_fault_cache(struct amdgpu_device
>>>>>>>>>>> *adev,
>>>>>>>>>>> - unsigned int pasid,
>>>>>>>>>>> + struct amdgpu_iv_entry *entry,
>>>>>>>>>>> uint64_t addr,
>>>>>>>>>>> uint32_t status,
>>>>>>>>>>> unsigned int vmhub)
>>>>>>>>>>> @@ -2915,7 +2915,7 @@ void amdgpu_vm_update_fault_cache(struct
>>>>>>>>>>> amdgpu_device *adev,
>>>>>>>>>>> xa_lock_irqsave(&adev->vm_manager.pasids, flags);
>>>>>>>>>>> - vm = xa_load(&adev->vm_manager.pasids, pasid);
>>>>>>>>>>> + vm = xa_load(&adev->vm_manager.pasids, entry->pasid);
>>>>>>>>>>> /* Don't update the fault cache if status is 0. In
>>>>>>>>>>> the multiple
>>>>>>>>>>> * fault case, subsequent faults will return a 0
>>>>>>>>>>> status which is
>>>>>>>>>>> * useless for userspace and replaces the useful fault
>>>>>>>>>>> status, so
>>>>>>>>>>> @@ -2924,6 +2924,11 @@ void amdgpu_vm_update_fault_cache(struct
>>>>>>>>>>> amdgpu_device *adev,
>>>>>>>>>>> if (vm && status) {
>>>>>>>>>>> vm->fault_info.addr = addr;
>>>>>>>>>>> vm->fault_info.status = status;
>>>>>>>>>>> + vm->fault_info.client_id = entry->client_id;
>>>>>>>>>>> + vm->fault_info.src_id = entry->src_id;
>>>>>>>>>>> + vm->fault_info.vmid = entry->vmid;
>>>>>>>>>>> + vm->fault_info.pasid = entry->pasid;
>>>>>>>>>>> + vm->fault_info.ring_id = entry->ring_id;
>>>>>>>>>>> if (AMDGPU_IS_GFXHUB(vmhub)) {
>>>>>>>>>>> vm->fault_info.vmhub = AMDGPU_VMHUB_TYPE_GFX;
>>>>>>>>>>> vm->fault_info.vmhub |=
>>>>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
>>>>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
>>>>>>>>>>> index 047ec1930d12..c7782a89bdb5 100644
>>>>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
>>>>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h
>>>>>>>>>>> @@ -286,6 +286,11 @@ struct amdgpu_vm_fault_info {
>>>>>>>>>>> uint32_t status;
>>>>>>>>>>> /* which vmhub? gfxhub, mmhub, etc. */
>>>>>>>>>>> unsigned int vmhub;
>>>>>>>>>>> + unsigned int client_id;
>>>>>>>>>>> + unsigned int src_id;
>>>>>>>>>>> + unsigned int ring_id;
>>>>>>>>>>> + unsigned int pasid;
>>>>>>>>>>> + unsigned int vmid;
>>>>>>>>>>> };
>>>>>>>>>>> struct amdgpu_vm {
>>>>>>>>>>> @@ -605,7 +610,7 @@ static inline void
>>>>>>>>>>> amdgpu_vm_eviction_unlock(struct amdgpu_vm *vm)
>>>>>>>>>>> }
>>>>>>>>>>> void amdgpu_vm_update_fault_cache(struct amdgpu_device
>>>>>>>>>>> *adev,
>>>>>>>>>>> - unsigned int pasid,
>>>>>>>>>>> + struct amdgpu_iv_entry *entry,
>>>>>>>>>>> uint64_t addr,
>>>>>>>>>>> uint32_t status,
>>>>>>>>>>> unsigned int vmhub);
>>>>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
>>>>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
>>>>>>>>>>> index d933e19e0cf5..6b177ce8db0e 100644
>>>>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
>>>>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
>>>>>>>>>>> @@ -150,7 +150,7 @@ static int
>>>>>>>>>>> gmc_v10_0_process_interrupt(struct
>>>>>>>>>>> amdgpu_device *adev,
>>>>>>>>>>> status = RREG32(hub->vm_l2_pro_fault_status);
>>>>>>>>>>> WREG32_P(hub->vm_l2_pro_fault_cntl, 1, ~1);
>>>>>>>>>>> - amdgpu_vm_update_fault_cache(adev, entry->pasid,
>>>>>>>>>>> addr,
>>>>>>>>>>> status,
>>>>>>>>>>> + amdgpu_vm_update_fault_cache(adev, entry, addr,
>>>>>>>>>>> status,
>>>>>>>>>>> entry->vmid_src ?
>>>>>>>>>>> AMDGPU_MMHUB0(0) :
>>>>>>>>>>> AMDGPU_GFXHUB(0));
>>>>>>>>>>> }
>>>>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
>>>>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
>>>>>>>>>>> index 527dc917e049..bcf254856a3e 100644
>>>>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
>>>>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v11_0.c
>>>>>>>>>>> @@ -121,7 +121,7 @@ static int
>>>>>>>>>>> gmc_v11_0_process_interrupt(struct
>>>>>>>>>>> amdgpu_device *adev,
>>>>>>>>>>> status = RREG32(hub->vm_l2_pro_fault_status);
>>>>>>>>>>> WREG32_P(hub->vm_l2_pro_fault_cntl, 1, ~1);
>>>>>>>>>>> - amdgpu_vm_update_fault_cache(adev, entry->pasid,
>>>>>>>>>>> addr,
>>>>>>>>>>> status,
>>>>>>>>>>> + amdgpu_vm_update_fault_cache(adev, entry, addr,
>>>>>>>>>>> status,
>>>>>>>>>>> entry->vmid_src ?
>>>>>>>>>>> AMDGPU_MMHUB0(0) :
>>>>>>>>>>> AMDGPU_GFXHUB(0));
>>>>>>>>>>> }
>>>>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
>>>>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
>>>>>>>>>>> index 3da7b6a2b00d..e9517ebbe1fd 100644
>>>>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
>>>>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c
>>>>>>>>>>> @@ -1270,7 +1270,7 @@ static int
>>>>>>>>>>> gmc_v7_0_process_interrupt(struct
>>>>>>>>>>> amdgpu_device *adev,
>>>>>>>>>>> if (!addr && !status)
>>>>>>>>>>> return 0;
>>>>>>>>>>> - amdgpu_vm_update_fault_cache(adev, entry->pasid,
>>>>>>>>>>> + amdgpu_vm_update_fault_cache(adev, entry,
>>>>>>>>>>> ((u64)addr) << AMDGPU_GPU_PAGE_SHIFT,
>>>>>>>>>>> status, AMDGPU_GFXHUB(0));
>>>>>>>>>>> if (amdgpu_vm_fault_stop ==
>>>>>>>>>>> AMDGPU_VM_FAULT_STOP_FIRST)
>>>>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
>>>>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
>>>>>>>>>>> index d20e5f20ee31..a271bf832312 100644
>>>>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
>>>>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c
>>>>>>>>>>> @@ -1438,7 +1438,7 @@ static int
>>>>>>>>>>> gmc_v8_0_process_interrupt(struct
>>>>>>>>>>> amdgpu_device *adev,
>>>>>>>>>>> if (!addr && !status)
>>>>>>>>>>> return 0;
>>>>>>>>>>> - amdgpu_vm_update_fault_cache(adev, entry->pasid,
>>>>>>>>>>> + amdgpu_vm_update_fault_cache(adev, entry,
>>>>>>>>>>> ((u64)addr) << AMDGPU_GPU_PAGE_SHIFT,
>>>>>>>>>>> status, AMDGPU_GFXHUB(0));
>>>>>>>>>>> if (amdgpu_vm_fault_stop ==
>>>>>>>>>>> AMDGPU_VM_FAULT_STOP_FIRST)
>>>>>>>>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
>>>>>>>>>>> b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
>>>>>>>>>>> index 47b63a4ce68b..dc9fb1fb9540 100644
>>>>>>>>>>> --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
>>>>>>>>>>> +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
>>>>>>>>>>> @@ -666,7 +666,7 @@ static int
>>>>>>>>>>> gmc_v9_0_process_interrupt(struct
>>>>>>>>>>> amdgpu_device *adev,
>>>>>>>>>>> rw = REG_GET_FIELD(status,
>>>>>>>>>>> VM_L2_PROTECTION_FAULT_STATUS, RW);
>>>>>>>>>>> WREG32_P(hub->vm_l2_pro_fault_cntl, 1, ~1);
>>>>>>>>>>> - amdgpu_vm_update_fault_cache(adev, entry->pasid, addr,
>>>>>>>>>>> status, vmhub);
>>>>>>>>>>> + amdgpu_vm_update_fault_cache(adev, entry, addr, status,
>>>>>>>>>>> vmhub);
>>>>>>>>>>> dev_err(adev->dev,
>>>>>>>>>>> "VM_L2_PROTECTION_FAULT_STATUS:0x%08X\n",
>>>>>
>>>
>
More information about the dri-devel
mailing list