[PATCH 6/6] drm/client: switch to drm device based logging, and more
Jani Nikula
jani.nikula at intel.com
Thu Mar 7 20:39:38 UTC 2024
Switch to drm device based logging and WARNs, and unify connector and
crtc logging formats. Pass drm device around a bit more to be able to do
this.
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/drm_client_modeset.c | 129 +++++++++++++++------------
1 file changed, 70 insertions(+), 59 deletions(-)
diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
index 871e4e2129d6..cb29a957a900 100644
--- a/drivers/gpu/drm/drm_client_modeset.c
+++ b/drivers/gpu/drm/drm_client_modeset.c
@@ -242,8 +242,10 @@ static void drm_client_connectors_enabled(struct drm_connector **connectors,
for (i = 0; i < connector_count; i++) {
connector = connectors[i];
enabled[i] = drm_connector_enabled(connector, true);
- DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
- connector->display_info.non_desktop ? "non desktop" : str_yes_no(enabled[i]));
+ drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] enabled? %s\n",
+ connector->base.id, connector->name,
+ connector->display_info.non_desktop ?
+ "non desktop" : str_yes_no(enabled[i]));
any_enabled |= enabled[i];
}
@@ -303,7 +305,7 @@ static bool drm_client_target_cloned(struct drm_device *dev,
}
if (can_clone) {
- DRM_DEBUG_KMS("can clone using command line\n");
+ drm_dbg_kms(dev, "can clone using command line\n");
return true;
}
@@ -332,15 +334,16 @@ static bool drm_client_target_cloned(struct drm_device *dev,
kfree(dmt_mode);
if (can_clone) {
- DRM_DEBUG_KMS("can clone using 1024x768\n");
+ drm_dbg_kms(dev, "can clone using 1024x768\n");
return true;
}
fail:
- DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
+ drm_info(dev, "kms: can't enable cloning when we probably wanted to.\n");
return false;
}
-static int drm_client_get_tile_offsets(struct drm_connector **connectors,
+static int drm_client_get_tile_offsets(struct drm_device *dev,
+ struct drm_connector **connectors,
unsigned int connector_count,
struct drm_display_mode **modes,
struct drm_client_offset *offsets,
@@ -357,8 +360,9 @@ static int drm_client_get_tile_offsets(struct drm_connector **connectors,
continue;
if (!modes[i] && (h_idx || v_idx)) {
- DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
- connector->base.id);
+ drm_dbg_kms(dev,
+ "[CONNECTOR:%d:%s] no modes for connector tiled %d\n",
+ connector->base.id, connector->name, i);
continue;
}
if (connector->tile_h_loc < h_idx)
@@ -369,11 +373,12 @@ static int drm_client_get_tile_offsets(struct drm_connector **connectors,
}
offsets[idx].x = hoffset;
offsets[idx].y = voffset;
- DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
+ drm_dbg_kms(dev, "returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
return 0;
}
-static bool drm_client_target_preferred(struct drm_connector **connectors,
+static bool drm_client_target_preferred(struct drm_device *dev,
+ struct drm_connector **connectors,
unsigned int connector_count,
struct drm_display_mode **modes,
struct drm_client_offset *offsets,
@@ -423,17 +428,19 @@ static bool drm_client_target_preferred(struct drm_connector **connectors,
* find the tile offsets for this pass - need to find
* all tiles left and above
*/
- drm_client_get_tile_offsets(connectors, connector_count, modes, offsets, i,
+ drm_client_get_tile_offsets(dev, connectors, connector_count,
+ modes, offsets, i,
connector->tile_h_loc, connector->tile_v_loc);
}
- DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
- connector->base.id);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] looking for cmdline mode\n",
+ connector->base.id, connector->name);
/* got for command line mode first */
modes[i] = drm_connector_pick_cmdline_mode(connector);
if (!modes[i]) {
- DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
- connector->base.id, connector->tile_group ? connector->tile_group->id : 0);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] looking for preferred mode, tile %d\n",
+ connector->base.id, connector->name,
+ connector->tile_group ? connector->tile_group->id : 0);
modes[i] = drm_connector_has_preferred_mode(connector, width, height);
}
/* No preferred modes, pick one off the list */
@@ -455,16 +462,18 @@ static bool drm_client_target_preferred(struct drm_connector **connectors,
(connector->tile_h_loc == 0 &&
connector->tile_v_loc == 0 &&
!drm_connector_get_tiled_mode(connector))) {
- DRM_DEBUG_KMS("Falling back to non tiled mode on Connector %d\n",
- connector->base.id);
+ drm_dbg_kms(dev,
+ "[CONNECTOR:%d:%s] Falling back to non-tiled mode\n",
+ connector->base.id, connector->name);
modes[i] = drm_connector_fallback_non_tiled_mode(connector);
} else {
modes[i] = drm_connector_get_tiled_mode(connector);
}
}
- DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
- "none");
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Found mode %s\n",
+ connector->base.id, connector->name,
+ modes[i] ? modes[i]->name : "none");
conn_configured |= BIT_ULL(i);
}
@@ -585,7 +594,7 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
if (!drm_drv_uses_atomic_modeset(dev))
return false;
- if (WARN_ON(count <= 0))
+ if (drm_WARN_ON(dev, count <= 0))
return false;
save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
@@ -624,26 +633,26 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
num_connectors_detected++;
if (!enabled[i]) {
- DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
- connector->name);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] not enabled, skipping\n",
+ connector->base.id, connector->name);
conn_configured |= BIT(i);
continue;
}
if (connector->force == DRM_FORCE_OFF) {
- DRM_DEBUG_KMS("connector %s is disabled by user, skipping\n",
- connector->name);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] disabled by user, skipping\n",
+ connector->base.id, connector->name);
enabled[i] = false;
continue;
}
encoder = connector->state->best_encoder;
- if (!encoder || WARN_ON(!connector->state->crtc)) {
+ if (!encoder || drm_WARN_ON(dev, !connector->state->crtc)) {
if (connector->force > DRM_FORCE_OFF)
goto bail;
- DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
- connector->name);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] has no encoder or crtc, skipping\n",
+ connector->base.id, connector->name);
enabled[i] = false;
conn_configured |= BIT(i);
continue;
@@ -660,28 +669,30 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
*/
for (j = 0; j < count; j++) {
if (crtcs[j] == new_crtc) {
- DRM_DEBUG_KMS("fallback: cloned configuration\n");
+ drm_dbg_kms(dev, "fallback: cloned configuration\n");
goto bail;
}
}
- DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
- connector->name);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] looking for cmdline mode\n",
+ connector->base.id, connector->name);
/* go for command line mode first */
modes[i] = drm_connector_pick_cmdline_mode(connector);
/* try for preferred next */
if (!modes[i]) {
- DRM_DEBUG_KMS("looking for preferred mode on connector %s %d\n",
- connector->name, connector->has_tile);
+ drm_dbg_kms(dev,
+ "[CONNECTOR:%d:%s] looking for preferred mode, has tile: %s\n",
+ connector->base.id, connector->name,
+ str_yes_no(connector->has_tile));
modes[i] = drm_connector_has_preferred_mode(connector, width, height);
}
/* No preferred mode marked by the EDID? Are there any modes? */
if (!modes[i] && !list_empty(&connector->modes)) {
- DRM_DEBUG_KMS("using first mode listed on connector %s\n",
- connector->name);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] using first listed mode\n",
+ connector->base.id, connector->name);
modes[i] = list_first_entry(&connector->modes,
struct drm_display_mode,
head);
@@ -700,8 +711,8 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
* This is crtc->mode and not crtc->state->mode for the
* fastboot check to work correctly.
*/
- DRM_DEBUG_KMS("looking for current mode on connector %s\n",
- connector->name);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] looking for current mode\n",
+ connector->base.id, connector->name);
modes[i] = &connector->state->crtc->mode;
}
/*
@@ -710,18 +721,18 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
*/
if (connector->has_tile &&
num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
- DRM_DEBUG_KMS("Falling back to non tiled mode on Connector %d\n",
- connector->base.id);
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Falling back to non-tiled mode\n",
+ connector->base.id, connector->name);
modes[i] = drm_connector_fallback_non_tiled_mode(connector);
}
crtcs[i] = new_crtc;
- DRM_DEBUG_KMS("connector %s on [CRTC:%d:%s]: %dx%d%s\n",
- connector->name,
- connector->state->crtc->base.id,
- connector->state->crtc->name,
- modes[i]->hdisplay, modes[i]->vdisplay,
- modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
+ drm_dbg_kms(dev, "[CONNECTOR:%d:%s] on [CRTC:%d:%s]: %dx%d%s\n",
+ connector->base.id, connector->name,
+ connector->state->crtc->base.id,
+ connector->state->crtc->name,
+ modes[i]->hdisplay, modes[i]->vdisplay,
+ modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
fallback = false;
conn_configured |= BIT(i);
@@ -737,15 +748,15 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
*/
if (num_connectors_enabled != num_connectors_detected &&
num_connectors_enabled < dev->mode_config.num_crtc) {
- DRM_DEBUG_KMS("fallback: Not all outputs enabled\n");
- DRM_DEBUG_KMS("Enabled: %i, detected: %i\n", num_connectors_enabled,
- num_connectors_detected);
+ drm_dbg_kms(dev, "fallback: Not all outputs enabled\n");
+ drm_dbg_kms(dev, "Enabled: %i, detected: %i\n",
+ num_connectors_enabled, num_connectors_detected);
fallback = true;
}
if (fallback) {
bail:
- DRM_DEBUG_KMS("Not using firmware configuration\n");
+ drm_dbg_kms(dev, "Not using firmware configuration\n");
memcpy(enabled, save_enabled, count);
ret = false;
}
@@ -782,7 +793,7 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
int i, ret = 0;
bool *enabled;
- DRM_DEBUG_KMS("\n");
+ drm_dbg_kms(dev, "\n");
if (!width)
width = dev->mode_config.max_width;
@@ -813,7 +824,6 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
offsets = kcalloc(connector_count, sizeof(*offsets), GFP_KERNEL);
enabled = kcalloc(connector_count, sizeof(bool), GFP_KERNEL);
if (!crtcs || !modes || !enabled || !offsets) {
- DRM_ERROR("Memory allocation failed\n");
ret = -ENOMEM;
goto out;
}
@@ -824,7 +834,7 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
for (i = 0; i < connector_count; i++)
total_modes_count += connectors[i]->funcs->fill_modes(connectors[i], width, height);
if (!total_modes_count)
- DRM_DEBUG_KMS("No connectors reported connected with modes\n");
+ drm_dbg_kms(dev, "No connectors reported connected with modes\n");
drm_client_connectors_enabled(connectors, connector_count, enabled);
if (!drm_client_firmware_config(client, connectors, connector_count, crtcs,
@@ -835,12 +845,12 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
if (!drm_client_target_cloned(dev, connectors, connector_count, modes,
offsets, enabled, width, height) &&
- !drm_client_target_preferred(connectors, connector_count, modes,
+ !drm_client_target_preferred(dev, connectors, connector_count, modes,
offsets, enabled, width, height))
- DRM_ERROR("Unable to find initial modes\n");
+ drm_err(dev, "Unable to find initial modes\n");
- DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
- width, height);
+ drm_dbg_kms(dev, "picking CRTCs for %dx%d config\n",
+ width, height);
drm_client_pick_crtcs(client, connectors, connector_count,
crtcs, modes, 0, width, height);
@@ -858,11 +868,12 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width,
struct drm_mode_set *modeset = drm_client_find_modeset(client, crtc);
struct drm_connector *connector = connectors[i];
- DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
- mode->name, crtc->base.id, offset->x, offset->y);
+ drm_dbg_kms(dev, "[CRTC:%d:%s] desired mode %s set (%d,%d)\n",
+ crtc->base.id, crtc->name,
+ mode->name, offset->x, offset->y);
- if (WARN_ON_ONCE(modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
- (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {
+ if (drm_WARN_ON_ONCE(dev, modeset->num_connectors == DRM_CLIENT_MAX_CLONED_CONNECTORS ||
+ (dev->mode_config.num_crtc > 1 && modeset->num_connectors == 1))) {
ret = -EINVAL;
break;
}
--
2.39.2
More information about the dri-devel
mailing list