[PATCH v3 6/7] arm64: dts: qcom: sm8650: add GPU nodes

[Konrad Dybcio]

On 2/16/24 12:03, Neil Armstrong wrote:
> Add GPU nodes for the SM8650 platform.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8650.dtsi | 166 +++++++++++++++++++++++++++++++++++
>   1 file changed, 166 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index 62e6ae93a9a8..27dcef27b6ad 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -2589,6 +2589,128 @@ tcsr: clock-controller at 1fc0000 {
>   			#reset-cells = <1>;
>   		};
>   
> +		gpu: gpu at 3d00000 {
> +			compatible = "qcom,adreno-43051401", "qcom,adreno";
> +			reg = <0x0 0x03d00000 0x0 0x40000>,
> +			      <0x0 0x03d9e000 0x0 0x1000>,
> +			      <0x0 0x03d61000 0x0 0x800>;
> +			reg-names = "kgsl_3d0_reg_memory",
> +				    "cx_mem",
> +				    "cx_dbgc";
> +
> +			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			iommus = <&adreno_smmu 0 0x0>,
> +				 <&adreno_smmu 1 0x0>;
> +
> +			operating-points-v2 = <&gpu_opp_table>;
> +
> +			qcom,gmu = <&gmu>;
> +
> +			status = "disabled";
> +
> +			zap-shader {
> +				memory-region = <&gpu_micro_code_mem>;
> +			};
> +
> +			/* Speedbin needs more work on A740+, keep only lower freqs */
> +			gpu_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-680000000 {
> +					opp-hz = /bits/ 64 <680000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
> +				};

I got a memo from krzk that we should be sorting OPPs low-to-high,
could you please reorder these (and under gmu)?

Otherwise lgtm

Konrad