[PATCH v1 1/1] drm/mediatek/ dp: Adjust bandwidth limit for DP
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Mar 18 10:10:44 UTC 2024
Il 15/03/24 02:52, Liankun Yang ha scritto:
> By adjusting the order of link training and relocating it to HPD,
> link training can identify the usability of each lane in the current link.
>
> It also supports handling signal instability and weakness due to
> environmental issues, enabling the acquisition of a stable bandwidth
> for the current link. Subsequently, DP work can proceed based on
> the actual maximum bandwidth.
>
> It should training in the hpd event thread.
> Check the mode with lane count and link rate of training.
>
> Signed-off-by: Liankun Yang <liankun.yang at mediatek.com>
This patch breaks both the internal eDP display *and* external DP on
at least the MT8195 Cherry Tomato Chromebook.
Regards,
Angelo
> ---
> drivers/gpu/drm/mediatek/mtk_dp.c | 57 +++++++++++++++----------------
> 1 file changed, 28 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
> index 2136a596efa1..14da6077f947 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dp.c
> @@ -1870,6 +1870,7 @@ static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
> struct mtk_dp *mtk_dp = dev;
> unsigned long flags;
> u32 status;
> + int ret;
>
> if (mtk_dp->need_debounce && mtk_dp->train_info.cable_plugged_in)
> msleep(100);
> @@ -1888,9 +1889,28 @@ static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
> memset(&mtk_dp->info.audio_cur_cfg, 0,
> sizeof(mtk_dp->info.audio_cur_cfg));
>
> + mtk_dp->enabled = false;
> + /* power off aux */
> + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
> + DP_PWR_STATE_BANDGAP_TPLL,
> + DP_PWR_STATE_MASK);
> +
> mtk_dp->need_debounce = false;
> mod_timer(&mtk_dp->debounce_timer,
> jiffies + msecs_to_jiffies(100) - 1);
> + } else {
> + mtk_dp_aux_panel_poweron(mtk_dp, true);
> +
> + ret = mtk_dp_parse_capabilities(mtk_dp);
> + if (ret)
> + drm_err(mtk_dp->drm_dev, "Can't parse capabilities\n");
> +
> + /* Training */
> + ret = mtk_dp_training(mtk_dp);
> + if (ret)
> + drm_err(mtk_dp->drm_dev, "Training failed, %d\n", ret);
> +
> + mtk_dp->enabled = true;
> }
> }
>
> @@ -2057,16 +2077,6 @@ static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge,
>
> new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc);
>
> - /*
> - * Parse capability here to let atomic_get_input_bus_fmts and
> - * mode_valid use the capability to calculate sink bitrates.
> - */
> - if (mtk_dp_parse_capabilities(mtk_dp)) {
> - drm_err(mtk_dp->drm_dev, "Can't parse capabilities\n");
> - kfree(new_edid);
> - new_edid = NULL;
> - }
> -
> if (new_edid) {
> struct cea_sad *sads;
>
> @@ -2243,14 +2253,10 @@ static void mtk_dp_bridge_atomic_enable(struct drm_bridge *bridge,
> return;
> }
>
> - mtk_dp_aux_panel_poweron(mtk_dp, true);
> -
> - /* Training */
> - ret = mtk_dp_training(mtk_dp);
> - if (ret) {
> - drm_err(mtk_dp->drm_dev, "Training failed, %d\n", ret);
> - goto power_off_aux;
> - }
> + /* power on aux */
> + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
> + DP_PWR_STATE_BANDGAP_TPLL_LANE,
> + DP_PWR_STATE_MASK);
>
> ret = mtk_dp_video_config(mtk_dp);
> if (ret)
> @@ -2269,7 +2275,6 @@ static void mtk_dp_bridge_atomic_enable(struct drm_bridge *bridge,
> sizeof(mtk_dp->info.audio_cur_cfg));
> }
>
> - mtk_dp->enabled = true;
> mtk_dp_update_plugged_status(mtk_dp);
>
> return;
> @@ -2284,16 +2289,10 @@ static void mtk_dp_bridge_atomic_disable(struct drm_bridge *bridge,
> {
> struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
>
> - mtk_dp->enabled = false;
> mtk_dp_update_plugged_status(mtk_dp);
> mtk_dp_video_enable(mtk_dp, false);
> mtk_dp_audio_mute(mtk_dp, true);
>
> - if (mtk_dp->train_info.cable_plugged_in) {
> - drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D3);
> - usleep_range(2000, 3000);
> - }
> -
> /* power off aux */
> mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
> DP_PWR_STATE_BANDGAP_TPLL,
> @@ -2310,10 +2309,10 @@ mtk_dp_bridge_mode_valid(struct drm_bridge *bridge,
> {
> struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> u32 bpp = info->color_formats & DRM_COLOR_FORMAT_YCBCR422 ? 16 : 24;
> - u32 rate = min_t(u32, drm_dp_max_link_rate(mtk_dp->rx_cap) *
> - drm_dp_max_lane_count(mtk_dp->rx_cap),
> - drm_dp_bw_code_to_link_rate(mtk_dp->max_linkrate) *
> - mtk_dp->max_lanes);
> +
> + u32 lane_count_min = mtk_dp->train_info.lane_count;
> + u32 rate = drm_dp_bw_code_to_link_rate(mtk_dp->train_info.link_rate) *
> + lane_count_min;
>
> if (rate < mode->clock * bpp / 8)
> return MODE_CLOCK_HIGH;
More information about the dri-devel
mailing list