[PATCH v11 0/7] drm/meson: add support for MIPI DSI Display
Neil Armstrong
neil.armstrong at linaro.org
Mon Mar 25 11:09:46 UTC 2024
The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
glue on the same Amlogic SoCs.
This is a follow-up of v5 now the DRM patches are applied, the clk & DT changes
remains for a full DSI support on G12A & SM1 platforms.
The DW-MIPI-DSI transceiver + D-PHY are clocked by the GP0 PLL, and the ENCL encoder + VIU
pixel reader by the VCLK2 clock using the HDMI PLL.
The DW-MIPI-DSI transceiver gets this pixel stream as input clocked with the VCLK2 clock.
An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
DW-MIPI-DSI transceiver.
The clock setup has been redesigned to use CCF, a common PLL (GP0) and the VCLK2 clock
path for DSI in preparation of full CCF support and possibly dual display with HDMI.
The change from v5 is that now we use a "VCLK" driver instead of notifier and rely
on CLK_SET_RATE_GATE to ensure the VCLK gate operation are called.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
Changes in v11:
- Rebased on v6.9-rc1
- Fixed overlay handling/creation
- Link to v10: https://lore.kernel.org/r/20240205-amlogic-v6-4-upstream-dsi-ccf-vim3-v10-0-dc06073d5330@linaro.org
Changes in v10:
- Rename regmap_vclk to meson_clk and add _gate for the gate
- Move COMMON_CLK_MESON_VCLK to following patch
- Remove CLK_SET_RATE_PARENT from g12a_vclk2_sel, keep it only on mipi_dsi_pxclk_sel
- Add more info on commit message to specify how clock setup is designed
- Remove forgotten CLK_IGNORE_UNUSED on g12a_vclk2_input
- Remove useless CLK_SET_RATE_PARENT on g12a_vclk2_div to stop propagatting rate _after_ vclk2_div
- Remove invalid CLK_SET_RATE_GATE on g12a_vclk2 since it's not a divider...
- Drop already applied patches
- move Khadas TS050 changes as an overlay
- Link to v9: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-0-95256ed139e6@linaro.org
Changes in v9:
- Colledte reviewed-bys
- Fixed patches 2 & 4, commit messages and bindings format
- Link to v8: https://lore.kernel.org/r/20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org
Changes in v8:
- Switch vclk clk driver to parm as requested by Jerome
- Added bindings fixes to amlogic,meson-axg-mipi-pcie-analog & amlogic,g12a-mipi-dphy-analog
- Fixed DT errors in vim3 example and MNT Reform DT
- Rebased on next-20231107, successfully tested on VIM3L
- Link to v7: https://lore.kernel.org/r/20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org
Changes in v7:
- Added review tags
- Fixed patch 5 thanks to George
- Link to v6: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v6-0-fd2ac9845472@linaro.org
Changes in v6:
- dropped applied DRM patches
- dropped clk private prefix patches
- rebased on top of 20230607-topic-amlogic-upstream-clkid-public-migration-v2-0-38172d17c27a at linaro.org
- re-ordered/cleaned ENCL patches to match clkid public migration
- Added new "vclk" driver
- uses vclk driver instead of notifier
- cleaned VCLK2 clk flags
- add px_clk gating from DSI driver
- Link to v5: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org
Changes in v5:
- Aded PRIV all the G12 internal clk IDS to simplify public exposing
- Fixed the DSI bindings
- Fixed the DSI HSYNC/VSYNC polarity handling
- Fixed the DSI clock setup
- Fixed the DSI phy timings
- Dropped components for DSI, only keeping it for HDMI
- Added MNT Reform 2 CM4 DT
- Dropped already applied PHY fix
- Link to v4: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org
Changes from v3 at [3]:
- switched all clk setup via CCF
- using single PLL for DSI controller & ENCL encoder
- added ENCL clocks to CCF
- make the VCLK2 clocks configuration by CCF
- fixed probe/bind of DSI controller to work with panels & bridges
- added bit_clk to controller to it can setup the BIT clock aswell
- added fix for components unbind
- added fix for analog phy setup value
- added TS050 timings fix
- dropped previous clk control patch
Changes from v2 at [2]:
- Fixed patch 3
- Added reviews from Jagan
- Rebased on v5.19-rc1
Changes from v1 at [1]:
- fixed DSI host bindings
- add reviewed-by tags for bindings
- moved magic values to defines thanks to Martin's searches
- added proper prefixes to defines
- moved phy_configure to phy_init() dw-mipi-dsi callback
- moved phy_on to a new phy_power_on() dw-mipi-dsi callback
- correctly return phy_init/configure errors to callback returns
[1] https://lore.kernel.org/r/20200907081825.1654-1-narmstrong@baylibre.com
[2] https://lore.kernel.org/r/20220120083357.1541262-1-narmstrong@baylibre.com
[3] https://lore.kernel.org/r/20220617072723.1742668-1-narmstrong@baylibre.com
---
Neil Armstrong (7):
dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
clk: meson: add vclk driver
clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
drm/meson: gate px_clk when setting rate
arm64: meson: g12-common: add the MIPI DSI nodes
arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 5 +
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 70 ++++
.../meson-g12b-bananapi-cm4-mnt-reform2.dts | 384 +++++++++++++++++++++
.../boot/dts/amlogic/meson-khadas-vim3-ts050.dtso | 108 ++++++
drivers/clk/meson/Kconfig | 5 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/g12a.c | 72 ++--
drivers/clk/meson/vclk.c | 141 ++++++++
drivers/clk/meson/vclk.h | 51 +++
drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +
11 files changed, 825 insertions(+), 20 deletions(-)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-b8e5217e1f4a
Best regards,
--
Neil Armstrong <neil.armstrong at linaro.org>
More information about the dri-devel
mailing list